Any information on the GAP Tempest? I have a Tacsport that I just swapped from a 020 to a 030 hanger because of some light primer strikes. I noticed that the bottom of the striker finish is pretty work considering the round count on the rifle (
I just received my TacSport 2 stage and installed it in my Defiance Deviant. When I took it apart 3 ball bearings fell out. Two were the ones in the video, and the other was smaller. Where does the small one go?
Jeffry the small bearing goes in the side of the trigger shoe on top of a small spring. It is used to keep the shoe pressed against the housing. Please call (701)371-4444, and ask for Luke if you still have questions.
We will have it on the way back within 1-2 business days. Can even send a video of it running at the specified weight you prefer in a Deviant action. There shouldn't be any issues with a Defiance actions.
@@BulletCentral I called this morning and talked to a person who I assume is a tech, he said send it in. The main sear isn't resetting unless I physically pull the main sear pin that the safety goes around back. It has to be installed in the action to malfunction. It's a left handed trigger if that makes a difference.
What sear do you recommend for a Ultimatum Deadline action? I am having all sorts of problems with hang fire, inconsistent primer strikes and firing pin going off randomly. Then I can pull trigger 10-15 times and not go off until the 15 pull.
Waiting patiently for a 2 stage Tikka T3x TacSport model!
Thank you for the video
Any information on the GAP Tempest? I have a Tacsport that I just swapped from a 020 to a 030 hanger because of some light primer strikes. I noticed that the bottom of the striker finish is pretty work considering the round count on the rifle (
So I will need to order Low Top Sear for TacSport PRO Trigger for Rem700 factory Action with 4mm Pin Center to
Top Sear measurement? Thanks
I just received my TacSport 2 stage and installed it in my Defiance Deviant. When I took it apart 3 ball bearings fell out. Two were the ones in the video, and the other was smaller. Where does the small one go?
Jeffry the small bearing goes in the side of the trigger shoe on top of a small spring. It is used to keep the shoe pressed against the housing. Please call (701)371-4444, and ask for Luke if you still have questions.
@@BulletCentral this trigger is still having issues. I just sent it back. Hopefully it gets fixed.
We will have it on the way back within 1-2 business days. Can even send a video of it running at the specified weight you prefer in a Deviant action. There shouldn't be any issues with a Defiance actions.
@@BulletCentral I called this morning and talked to a person who I assume is a tech, he said send it in. The main sear isn't resetting unless I physically pull the main sear pin that the safety goes around back. It has to be installed in the action to malfunction. It's a left handed trigger if that makes a difference.
What sear do you recommend for a Ultimatum Deadline action? I am having all sorts of problems with hang fire, inconsistent primer strikes and firing pin going off randomly. Then I can pull trigger 10-15 times and not go off until the 15 pull.
Be nice you do close up camera worth thousand words cheer