PW is about 200Lbs, motor 103 Lbs, pump 40Lbs, all the other parts make up the rest. But it would be easier to pick up in Joe's orientation being gear reduction drive.
Joe, I ran into this problem myself. Some of the bulkhead fittings do not match up with cam lock style adapters. I found I had to use a fernco fitting from Lowe’s and just slide it over the fitting and clamp it down. It works great, zero leaks.
Yeah I ordered mine from pressure washer products 2" cam lock to 2" FPT Then I got the adapter 2" MPT to 1.5" FPT Then I just did 1.5" fittings from there to barbs for the 1.5" hose
those 2" cam locks on the ibc are awesome, I prefer them. mine has same style, I use a gator lock cam locks, they are spring locking pins and dont have to use the annoying cotter spring clip things. get a 2" female cam lock with 2" npt threads and make your connection how you want. personally I run all 1" bulkheads out the lowest point on the side of my ibc tank near my machines for all my water feed lines, I use the 2" cam lock valve for dumping tanks to travel and filling buckets/handwashing. Never had leaking issues with bulkhead feeds
3” cam locks from Tractor Supply or similar store. It will slip over your valve nipple and lock on to it. You can get female or male threads on the other end. I have my tanks set up this way.
For the tote outlet I ordered mine from pressure washer products 2" cam lock to 2" FPT Then I got the adapter 2" MPT to 1.5" FPT Then I just did 1.5" fittings from there to barbs for the 1.5" hose
Yup camlock will wicked work get ya! Get a piece of 6x6 to hold the plumbing vertical and knock the stress off the cap you’re looking at is a temporary shipping cap used to prevent spills in transit.
It's a 2" camlock fitting. I have one on mine. Made of aluminum. It has 2" npt female threads on it. Then I use pvc fittings to adapt to your suction line.
Check out that link, I use a cam lock to npt adapter. I believe mine is banjo name brand. I’ll send my exact part to you tomorrow via text message around lunch.
joe, I saw all kinds of different IBC tote fittings on amazon a few weeks ago. you can probably overnight ship them too. try using keywords like "rain barrel" too
@@powerfulimprovements instead of using the camlock and then a bunch of adaptors and hoseclamps, I went to a specialty hose place and had a 2" assembly made up that has the cam on one end and the proper hookups for my machines on the other. lots of flow, and very clean looking.
I’m guessing you already found a solution but you might have good luck at tractor supply if you have one locally. 2” female cam lock with threads on the end to fit your adapter. I ordered on that gates down to a hose barb if I need to feed water to a portable unit off of the trailer.
That’s is a camlock “fitting” valve. You can keep that one in making it easy to take off or swap it for a plain by threaded valve. Easy fix. I would leave the camlock for easy take off
No it’s the part you asked about a special threads. That is actually a male fitting not female. Like these guys said go to tractor supply or somewhere similar and you should find these.
That black box for the battery I'd put the hole on the back not the top if u could then after u can just buy a grommet for it and water won't go in when it rains u pointed at the top is all
@@powerfulimprovements awesome! The lower gpm washers i use don't have fuel pumps, so i bought a pump. Still haven't reconfigured for this season yet though.
That dude just picked up and carried GX690 Pressure Washer like it was nothing 😲
💪🏼😎👉🏼
Exercise is free
Just need to point out.. Mike C needed 2 people to lift his 8gpm…. Joe walked out of the shed.. strolling with it solo
Jesus, I had the same thought😳
Brothers, I can’t lift my legs without help!
Let’s also point out that I’ve never tipped over my oil pan, like an idiot!😊
PW is about 200Lbs, motor 103 Lbs, pump 40Lbs, all the other parts make up the rest. But it would be easier to pick up in Joe's orientation being gear reduction drive.
@@MannyAguilarJr I agree. I’m not attempting in regardless. Certainly not off the floor. MAYBE off a table.
Joe, I ran into this problem myself. Some of the bulkhead fittings do not match up with cam lock style adapters. I found I had to use a fernco fitting from Lowe’s and just slide it over the fitting and clamp it down. It works great, zero leaks.
Joe,
You have a camlock style valve. Get a camlock adapter with tread on the other end. This way you can connect the tread pipe. I hope that helps.
That is what i did to have as a 2inch drain
Yeah I ordered mine from pressure washer products
2" cam lock to 2" FPT
Then I got the adapter
2" MPT to 1.5" FPT
Then I just did 1.5" fittings from there to barbs for the 1.5" hose
those 2" cam locks on the ibc are awesome, I prefer them. mine has same style, I use a gator lock cam locks, they are spring locking pins and dont have to use the annoying cotter spring clip things. get a 2" female cam lock with 2" npt threads and make your connection how you want. personally I run all 1" bulkheads out the lowest point on the side of my ibc tank near my machines for all my water feed lines, I use the 2" cam lock valve for dumping tanks to travel and filling buckets/handwashing. Never had leaking issues with bulkhead feeds
2 or 3" camlock (gatorlock from tractor supply) with either mnpt or fnpt then a reducer and/or barb
3” cam locks from Tractor Supply or similar store. It will slip over your valve nipple and lock on to it. You can get female or male threads on the other end. I have my tanks set up this way.
Are you sure 3" and not 2". My tote has a different style valve but it's a 2" cam lock.
Only Joe is washing in January, in the north east. You da man. 🤣🤣💪💪👍🌨️🌨️🥶
For the tote outlet I ordered mine from pressure washer products
2" cam lock to 2" FPT
Then I got the adapter
2" MPT to 1.5" FPT
Then I just did 1.5" fittings from there to barbs for the 1.5" hose
Yup camlock will wicked work get ya! Get a piece of 6x6 to hold the plumbing vertical and knock the stress off the cap you’re looking at is a temporary shipping cap used to prevent spills in transit.
Just carries the machine out lmfao 🤣 then tomorrow morning wondering why u can't get outta bed lol I bet that was heavy for sure
Popcorn
It's a 2" camlock fitting. I have one on mine. Made of aluminum. It has 2" npt female threads on it. Then I use pvc fittings to adapt to your suction line.
This is exactly my setup
Gator Lock 2 in. Camlock Quick Coupler, part B at tractor supply is what i use
So impressed with the McGyver but yeah a 2 " or 3" camlock over that will work for sure.
✌🏼❤️
Check out that link, I use a cam lock to npt adapter. I believe mine is banjo name brand. I’ll send my exact part to you tomorrow via text message around lunch.
Camlock from tractor supply, I just went through this on my rebuild.
Hi Joe! Ouch on the oil spill. I am going to try “BacKrete” on oil stains this year.
Let me know if it works
joe, I saw all kinds of different IBC tote fittings on amazon a few weeks ago. you can probably overnight ship them too. try using keywords like "rain barrel" too
Already fixed. 2” banjo
Quick and slick.. I like it..
I had the exact same issue on my old rig. as others have suggested, I had to use a cam-lock adaptor
✌🏼❤️
@@powerfulimprovements instead of using the camlock and then a bunch of adaptors and hoseclamps, I went to a specialty hose place and had a 2" assembly made up that has the cam on one end and the proper hookups for my machines on the other. lots of flow, and very clean looking.
@@jessiahpedde9700 sweet!
Gator/Cam lock from tractor supply
I don’t know what happened after Joe carried the 8gpm all by HIMSELF! I lost it! 😂😂 Mike C need some learning to do! 😅
💪🏼💪🏼
I’m guessing you already found a solution but you might have good luck at tractor supply if you have one locally. 2” female cam lock with threads on the end to fit your adapter. I ordered on that gates down to a hose barb if I need to feed water to a portable unit off of the trailer.
Much appreciated
Eat your Wheaties kids. Wash season is coming 💪💪
💪🏼💪🏼
I’m a little late but cam lock on the tote
✌🏼❤️
That’s is a camlock “fitting” valve. You can keep that one in making it easy to take off or swap it for a plain by threaded valve. Easy fix. I would leave the camlock for easy take off
The guy you bought the tanks from might have the adapters for this or could tell you where you can get them.
Good luck 👍
They have male and female camlocks. You need a 2 inch camlock size wise
Mikey like it …MIKEY LIKE IT !!!!
I thought we were going to keep this between us?
Well… 🤷🏼♂️
Cam lock from tractor supply
Are you referring to the silver part that attaches to the tank?
Looks like a 3" camlock fitting on your tank
Do you mean where the valve meets the tank? Silver ring?
No it’s the part you asked about a special threads. That is actually a male fitting not female. Like these guys said go to tractor supply or somewhere similar and you should find these.
@@warriorofgodfitness488 yes. Now I get it. Much appreciated
No problem I’m new to this stuff and have learned a lot from you. Still in the process of building my rig hopefully will be ready early spring.
No problem I’m new to this stuff and have learned a lot from you. Still in the process of building my rig hopefully will be ready early spring.
What's up Joe!! 👍 ✌️
Scott! 💪🏼💪🏼
That black box for the battery I'd put the hole on the back not the top if u could then after u can just buy a grommet for it and water won't go in when it rains u pointed at the top is all
Exactly
We to go big dog !!!!
💪
Will that gas tank need to be higher than the pressure washer to gravity feed or is there a fuel pump somewhere in the mix?
The gx690 has a fuel pump. So it pulls
@@powerfulimprovements awesome! The lower gpm washers i use don't have fuel pumps, so i bought a pump. Still haven't reconfigured for this season yet though.
Going back to da basics
Any 2 inch female cam lock will fit over that fitting on your tote Joe.
There's an outer adapter for that
You don’t use tape.?
@@rogerbrandt6678 I do when it counts
That is a camlock fitting.
No need to show off packing 200lbs around like it’s nothing 😂
💪🏼💪🏼✌🏼❤️
First
💥💥💥💥💥