OctoEverywhere - Access Octoprint from anywhere - Chris's Basement
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2024
- Today we're going to check out and install Quinn Damerell's new community plugin, OctoEverywhere! We'll also take a look at some Octoprint applications while we're at it. OctoEverywhere! I just like saying it.😉
00:00 Introduction
01:03 Overview
2:26 Installation
10:35 Octoprint Apps
15:25 Conclusion
Helpful Links:
Link to OctoEverywhere
octoeverywhere.com/?source=ch...
Github link:
github.com/QuinnDamerell/Octo...
Plugin link:
plugins.octoprint.org/plugins...
Touch UI plugin:
plugins.octoprint.org/plugins...
Printiod Link:
printoid.net/
SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
OpenBuilds - Great CNC and 3D Printer Parts (aff)
openbuildspartstore.com/?ref=...
Slice Engineering - Mosquito Hotends (aff)
www.sliceengineering.com/?p=r...
Wham Bam Systems Flexible Beds (aff)
bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
www.amazon.com/?tag=chrisbase...
Banggood(aff) ban.ggood.vip/7vm3
Aliexpress(aff) s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
/ brotherchris
One Time Tips, You Can PayPal Me:
www.paypal.me/ChrisRiley3D
----------------------------------------------
Find Me Over On Twitter!
----------------------------------------------
Twitter : / chrisriley3d
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
Your video makes setup so easy I thought I was skipping steps!
Thank you! That's great to hear
Thanks Chris. Super easy to follow video as always! Had been looking and waiting for something like this! Cheers
I'm here to help! Thank you
Simple, secure and easy; exactly how it should be! Thanks for this easy to follow tutorial.
You bet!
Every single video of yours is so detailed and helpful. Thank you so much for all of your work ._.
Glad you like them! Thanks!
Hey Chris. I just have to say you are one of the best. I really like the way you explain things, direct to the point. I watched your video about bed levelling on Marlin 2.0 and you explained many things I wanted to know for a long time. I'd comment on that video, but comments are disabled there. Anyway, keep this great work.
Thank you!
Literally just watched your Port Forwarding video and then this one popped up, great timing. I will be setting this up.
Great! Thanks for watching
@@ChrisRiley Already installed it, thanks again.
This was awesome Chris! I need this! Great vid.
Glad you liked it!!
I've been using OctoEverywhere since pretty much the beginning and it's always been fantastic. There's nothing out there that does what it does so seamlessly and the guy who runs it is very responsive and professional. Very happy with it.
Quinn Damerell's a great guy!
Man, thanks!! I have been looking for an easy, straightforward solution.
Glad it helped!
You the man, Chris. Well done my friend.
Thank you kindly!
Thanks Chris as usual awesome tutorial and thanks to the octoeverywhere people!! 💪
You bet! Thanks for watching
That looks way better than all the others I have tried. I finally took the time to setup a VPN, and that solved all my connections into my network at once. But may go back to revisit this.
Yeah, I figured a lot of us tech types probably had VPN, but this was super easy to setup, worth checking out.
Whoa, TouchUI is a game changer for OctoEverywhere!! Thanks Chris!
Happy to help! Thank you
dude! u saved me, now i feel me form confident at the time i need to leave home and im printing +7hrs
Great! Thanks for watching!
I want to tell you. You´re great. Thanks a lot from Argentina!
Wow, thank you!
Great video. Didn't know this app existed. Mahalo for sharing! : )
Thank you!
Always good to hear you 😃100%
Thank you!
Seems like with the amount printers its time to link them up, thanks for sharing this Chris, stay safe Sir !
Thanks Ron!
Oh I have been waiting for this! Game changer.
Cool, thanks!
Thank you so much, im your fans from Malaysia. Really Love all your tutorial 😊😊
Awesome! Thank you!
Thank you for this video. Love the fact I don't have to create a tunnel through my home security to be able to see and control my 3D printer.
Glad it was helpful!
Thank you Chris
Thank you!
It looks like I'm taking my tablet with me when I go out!
Woo hoo!
Well done
Thank you!
Chris, Where do you find the time to keep producing such good material? This is a great addition to Octoprint and will be very useful for anyone who is not always at home.
Wow, thanks!
Hi Chris, excellent explanation in all your tutorials. always worth seeing.
After watching this tutorial, I have a query. Can I use this with Fluiddpi and Klipper or is there some other option?
I don't think so, but I am not sure. I think it will always require octoprint.
that was easyyy! thank you
Glad it helped!
Thanks for this Video
Most welcome. Thanks for watching!
THANK YOU for starting out the video by saying the port forwarding method is not secure! Too many videos on TH-cam saying that’s the best way.
You're welcome, Thanks!
Another option for people who don’t mind setting up a vpn and use iPhone is octopod. Running an openvpn server on a pi is super easy. Once you get it all setup and can connect from your phone you simply install the plug in for octoprint and install the octopod app which is free and open source. you can then remotely control all your printers, view all your camera streams in real time with no limits and you can even monitor them from your Apple Watch. Yes you have to setup a vpn, but it’s easy and secure and you don’t have to pay any fees monthly.
Thanks for the tip!
Cool!
Thanks!
Veeeeeery nice
Thank you!
Hi Chris
What a great job you are doing, you convinced my partner and I to go for it. Our prusa mini is celebrating its first day of work while the Mark3S is being assembled.
We followed your installation protocol on the pi 3b+ without any problem! Thanks again for your great work. One question though, we have successfully launched a print from octoprint with tracking of instruments and print progress (time left/slicer).
However, when we launch a print from the usb key for example (the pi 3b+ is always connected), octoprint does not update the status of the machine and does not follow the progress of the print in progress. I intend to manage everything on octoprint soon but is there a plugin that follows the printings launched "manually" when there are. Thanks again for your help.
Prusa has done some tricks to keep the printer sort of "locked" while Octoprint is active. They have done it so one doesn't conflict with the other. I think there might be a plugin that will track the M73 command that Prusa uses. That might do the trick.
Howdy. Great video. I just started using klipper for processing features like arc welder and input shaper. Anyway just wondering if this plugin would be compatible with Klipper /Fluidd ?
Yeah, it should work with Klipper just fine.
Hi Chris, how are you?
I have an MKS E3D V1.1 card, when I try to use Octoprint my printing stops (Printer Hanged), I already changed the baud rate that the card connected from 250000 to 115200 and that did not solve the problem.
Have you ever had a problem similar to using Octoprint related to stop printing after the process has started?
Yes, I have seen that before, it is usually something in the firmware that the printer is running. I have corrected it by upgrading the firmware in the past.
@@ChrisRiley I am currently using Marlin 2.0.6.1 and I have no idea what is going on.
Can this be used to say allow my friends to watch the print or the gcode tab live (the stream or the gcode tab thing in octoprint) with out them having access to my full octoprint functions?? I'm looking for something that can do that also
Yes you can! You would just give them access in octoeverywhere, but then create them a new user id in octoprint.
I have been using remote.it for a few years on Raspi. Will give this ago to remove the security warning using remote it.
Good luck on your project!
Chris, I don't want to add more software to learn to use a 3D printer, and would prefer to use a remote, off site Cura, with direct links to octopi. What is the secure way to do this?
I know that I could use an app like Teamviewer and log into a local PC on the home network and run Cura there, but is there another way that I can create a secure link from a remove Cura instance? (I also sent you a tweet)
Hey Ray, yeah, about the only other thing I know to do would be to setup some sort of VPN, not exactly sure how it would all work.
@@ChrisRiley hi Chris, I believe if we can set up piVPN on the raspberry pi along side octoprint it would enable creating a tunnel to my grandsons house, it would not be difficult the piVPN would create a key which would be installed at my grandsons house in a client open on.
I tried to install it on my pi with octoprint installed but it would not install. Looked like there was a block on creating new directories and adding the necessary files and I’m not sure how to get around that.
Also, I don’t have a good feel for how much performance octoprint uses and how much piVPN uses. I have a pi 4 with 2gb which I believe should be powerful enough.
Hi, I want to know if you are using octoprint, if you know a way to protect the files form sd so theirs can’t be downloaded. Could you help me?
You can create a user are remove download access.
I don't know if you can help me as I'm doing this on a windows PC. I have a PI coming soon. I followed your instructions buy that plugin never installed even after a restart. When I went to try it again I couldn't find the plugin in the search.
I am not sure what is going on, but that usually means it thinks the plugin is installed. Make sure it is enabled in the install list, there should be a toggle switch.
Anyone else gets an error when trying to connect from a printer from another instance? It says that the printer is already on this account. I'm trying to connect a PrusaMK3, 2 Anycubics and a Creality CR10S PRO
I haven't seen that one, check over in the issues on the github, they will know what to do.
I followed your tutorial on how to add another instance of octoprint to my second printer. But I cant make octoeverywhere recognize the second instance. It seems to think it is already setup, since I set it up with my first instance before. So both instances are recognized as one... please help
Uninstall the OE plugin from the second instance and install it again. That should fix it.
@@ChrisRiley thanks man, I did this and it started working!:) appreciate you taking the time to answer
Any input on the best IOS apps for this? Unfortunately stuck with apple for rn.
I wish I know, there is an OctoIOS I think.
Thank you for sharing, Chris.
In a very professional way.
Actually I'm using a VPN server handled by my Assus router and the octo remote app on the phone. The octo everywhere looks very promising but still, correct me if I'm wrong, it still uses a cloud and, by comparison i think that VPN is more secure and faster than cloud. I'm not a suspicious guy but cloud is cloud.... I don't know if the octo remote app can handle multiple instances, tough so this might be a big pro for the cloud based platform.
Anyway, thank you, all the best!
Thank you for your insight!
Looks almost to good to be true, how do they finance themself?
Not really sure other than donations.
Sounds like we can combine octoeverywhere and octofarm
Yeah, that sounds like a great idea.
Hello! Sorry for my English )). I installed Octoprint on my Windows 10 computer according to your video instructions for which, I thank you very much. Everything works fine. But I ran into a problem, I do not show video from the camera in octo everywhere. The path in the octoprint is: http: // my ip address: 8081 / video.mjpg. Please tell me what I need to do to
octoeverywhere was the video camera showing?
It currently only uses port 8080, but they have an update out that will let you use it like you want to here. Check for the update.
At the end of the day I prefer Telegram plugin and Zerotier approach
Thanks for your comment!
please help im trying too login too octoeverywhere and its keeps telling me incorrect username and password
That could be just a problem with your account, contact their support.
Interesting, but I think I'll stick with my OpenVPN server!
I did however create a few php scripts on my webserver to get all cams on screen simultaneously (or offline message if printer off). Quite like to have came on FireTV in bedroom, but do use away from home occasionally (mostly at home due to Covid lately).
Hi James, you're logging in from the web browser right? I'm just curious if multiple instances could be accessed from the octoprint app? Did you tried? Thanks for any input.
That would be a cool script to have.
@@neagoecatalin879 I run separate Pies for each printer. Never tried with different instances on same Pi. I quite like using desperate ones TBH as there isn't one point of failure! Plus one of them is a Pi2 and can struggle a bit.
Yes, it's just a PHP processing script which pings each printer in turn and creates a table with either "offline.jpg" or the path to the camera in relevent boxes! The PHP runs on a whole separate Pi which functions as webserver (household stuff, instructions, Christmas decoration controls, bus times, etc), MQTT server, printer & scanner server, etc. Really needs updating as is still running Wheezy!
@@ChrisRiley It's not a complex script TBH (you can certainly manage better). All it does is pings the relevent IP addresses/hostnames (dropped out to command line, was lazy) for each printer and then substitutes "offline.jpg" for the mjpeg stream address in the outputted html.
I actually wrote multiple versions over the years (originally started for my local hackspace). But mostly comes down to one for "tall" screens (my phone) and one for "wide" screens (FireTV while reading/eating/cleaning/etc or tablet)! Although the "tall" version doesn't have an offline.jpg. Just substitutes text! E.g. "Ender 3 offline" (fit better on screen, can't think what'll happen when I get to 4th printer!).
If I can remember I'll try to e-mail you it.
mine wont even let me log in, even though all the details are correct.
What part? On the site?
@@ChrisRiley it's working now, whenever I went on Octo everywhere then tried to sign in octiprint would say my details were invalid, I had to turn the raspberry pi off and reload everything then it started working
single camera stream is a deal breaker for me
I think they actually have it now.
Given the limitations of the free account, I prefer the Octoprint Telegram bot plugin.
Oops... you show an IP and an email address in the video (phone section).
🙂
A lot of routers have VPN functionality built in, so you could just tunnel into your network and log onto your OctoPi like you were at home.
Thanks for the tip!
This feels like the a fusion of the Fusion 360 route.
Slowly the clamps will come on, and people will realize its open source but obscure or some part of it is missing and then the already high 40 bucks a year will start creeping.
Yea, yea, I know. Pessimistic, but thats modern software as a service.
If I ignore the nagging sensation that the above will happen it sounds just fine.
lol, well lets just hope for the best.
Anyone else using OctoRemote?
I use OctoRemote when I'm home, but that doesn't work when you're not on the same WiFi.
OctoEverywhere is essentially the same as logging into Octopi.local. So all of your plugins and any other themes or whatever you're using are available.
I was when i had an Android phone and it worked great.
👍
How is this different than Spaghetti Detective?
Hi Steve, i think that the Spaghetti is having a different mission, here. It might be seen as a more capable tool but i don't know if it's really doing all that octoprint everywhere does, like multiple instances for example. But it does detect the failures and it's able to pause the print and notice you.
🙂👍
Yea TeamViewer is free too. And easier.
🙂👍
no apto para pobres, te cobran una suscripcion en dolares
Hay una versión gratuita que puedes usar.
god whoever designed octoeverywhere site needs to be fired thats ridiculous cursive font is illegible mostly.. there has to be a better alternative, think im just going to port forward and use browser on phone, thanks anyhow for the video
Thanks for watching