This looks great! . Exactly what I was looking for on TH-cam. Nice detailed video. Thanks you for taking the time to share this. We just lost our second fabric cover in the high winds here. Once I can determine how we can still use our screens, something like this will be built at our home. 😊
Thanks for the info, I have done my 10x14 using your reference, except that I doubled the metal frame on wood to ensure it doesnt flight out!! Thank you very much
I’d like to do the same thing with my gazebo but I hesitate precisely because of the bigger size (10x14) and the wind which sometimes blows quite strongly. Even the cheapest hardtop models on the market have a much more robust structure and hardware. So, after more than 2 months, is everything still okay with your 10x14? Did you make any other changes?
Thanks for the video, I was hoping to see how you climbed up to the the screws all the way to the top. I have a gazebo roof that i want to replace but for the life of me I can't figure out how to climb on top to take off the old panels and then get up again to put the new ones without falling through.
Hello Robert, your roof on the gazebo inspired me and my husband to do the same. We have some questions about installing the panels, where did you start and where did you measure from and make your cuts from......panels , flashing..etc. 10x12 To start out with!
Start in the middle. It will be easier to keep it straight. Go left and right from the middle. At the corners continue from the sides with corrugation, valley to valley, top to top. It is challenge to go around and meet the corrugation at the end. Choose the end corner that is less visible. I was off by less than 1/4 inch at the end. The panels are in different lengths. Choose those that will allow for less cuts and leftovers. Good luck!
@@robertdeptula2003 Thank you for the quick response.....my husband is placing the panels at the top marking and cutting for placement. so now the edge of the top will be uneven and long in places. His plan is to finish by trimming all panels all the way around. We have a bet! I believe that all cuts are only at the top. Did you do all cuts from the top, and if not how were you able to get such an even cut along the edges?
If it survives Quebec, it can survive New England. Going to try this. I wonder how to attach netting and fabric sides. A very well edited video. Well done! What are the dimensions of the major roof beams, 2x3 inches or the metric equivalent?
I bought screws from two different producers. The original Suntuf screws are OK, the screws from the other source rusted and I had one leak. Replaced the screws and everything is OK now.
Amazing project. I’m planning mine soon. As I cannot take my Gazebo down, I will have to do it while it’s up. It’s gonna be challenging. Do you think it’s feasible? I wish you have listed all the needed materials. Thanks for the 2nd video. You posted it at the right time :)
My neighbor's roof (on the still picture in the video) was done without taking it down to the ground. We put a piece of plywood on top of the jacuzzi inside and worked from there. You have to remember to use a big piece of plywood if you need to get on top of the panels to spread pressure evenly. For the materials, everything is mentioned, with links, somewhere in the comments to the first video when I answered questions. The only thing that I couldn't find the link to was the metal corner. I bought it in Home Depot Vaudreuil, Quebec, Canada.
Thank you so much for the excellent video. My soft top is a few years old and I am debating on buying a new top? replacing with hard top(like you did) or going the expense of of adding a 3 season room. I am told the 3 season room would be much harder to place on the deck because of the deck legs? apparently the walls of a 3 season need to be anchored to the ground. I am only planning a 10 x 10 as this divides the deck at the stairs leaving a screened room on one side and open air on the other. You video makes me think a new top is really all we need, at least for now. How is your gazebo hold up? What year did you build it?
@@robertdeptula2003 thank you, that helps alot, assuming there is no supply issues, i will see what i can do in the spring or early summer. thanks again and enjoy your wonderful gazebo.
What metal braces did you use at the Middle and Top corners? Is it a T or 2 pieces joint together to form a T? I bought some T’s but they won’t be easily bent. What type of wood paint did you use?
Those are Ts. I used vise and hammer to bend them. You need those Ts to be strong. The paint is universal for wood and metal in a spray can. Don't remember the brand.
Thank you for your good words. No, I don't have any diagrams. It was a "cut as you go" project. The screws are sold by the same company as the panels. In your home improvement store, the screws should be next on the shelf to the panels. Good luck!
Great video Robert, thanks for posting. I have a very large steel cabana with metal roof. The weight of the snow has bent some of the rails over the years. I installed six patio doors around the perimeter which gives it more strength but I'm still concerned about the overall weight especailly with the snow load, and I'm tired of taking the snow off all the time. I was thinking of doing exactly what you did although I may screw the panels right into the exsisting steel beams. I suspect the snow just slides off in the winter? Do you find it too warm if the sun is out? I installed reflective layer of styrofoam under my metal roof. The metal roof got so hot in summer you would just bake like sitting in an oven. I guess my biggest concern would be the heat (although great in spring and fall) and perhaps a hailstorm hehe. I must say it looks really nice!!
You can buy white panels that will not heat up so much like those in the video. The snow stays on the roof, but the panels are strong and don't bend. As soon as there is a little bit of sun the snow slides off of the roof. In "about" section there is my e-mail. Write to me and I will send you some winter pictures of the roof.
Would you kindly post more pictures of the inside, the framing? I’m trying to copy your design and process with my old metal gazebo that no longer has the metal roof frame. Thank you.
hello，thank you for posting this great video, could you please let me know where you buy those polycarbonate panels? I checked the prices from those retailers, they are all overpriced! Thank you very much
I am not suggesting how anybody should do it. In this video I share my take on it. The reason I didn't drive the screws to the aluminium frame was that I didn't want to weaken the structure making many holes in it. I preferred to brace wooden beams to the metal frame and drive all the screws to the wooden beams. What you will do is up to you.
I didn't have a Gazebo for the longest time because those cloth tops are notorious for tearing. I found a used gazebo in great shape for cheap, without the cloth top, and bought it with plans to do exactly this. I am also from Quebec. Where did you finally buy the panels? Are they polycarbonate or PVC? PVC is cheaper, but I am worried about it's ability to survive a winter. I am expecting a hard top roof like this to cost between $500-$700?
Those are polycarbonate. I don't think that PVC will hold for the winter. I bought the panels at reno depot. From time to time they have 20% off when you spend a certain amount. If I remember well the panels cost me about 350 - 400.The steel corners are from Home Depot. Good luck!
Panel cuts depend on the specific model of the gazebo. Measure your gazebo, check what size panels you can buy and this way determine what cuts must be made in the specific case. It is not one size fits all.
I don't remember the price. Your cost will depend on where are you located. In US it will be cheaper than in Canada. I am in Canada and my local home improvement store has 20% off sale from time to time.
Robert Deptula Thanks for a very helpful video. You are very generous man. Do you think I could do it for about $200 or less? How long did it take you to complete?
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
This looks great! . Exactly what I was looking for on TH-cam. Nice detailed video. Thanks you for taking the time to share this. We just lost our second fabric cover in the high winds here. Once I can determine how we can still use our screens, something like this will be built at our home. 😊
first i admit you have such patience , also you are super smart as i never saw a gazebo with corrugated roof , great job !!
Thank you.
your video inspired me to convert my hard to find (and expensive) polycarbonate 8mm panel to those easier to find polycarbonate panels
Glad I could help!
Excellent video. I am going to do the same as you because the canvas covers get destroyed in the varied Southern California weather.
Good luck with your project!
Thanks for the info, I have done my 10x14 using your reference, except that I doubled the metal frame on wood to ensure it doesnt flight out!! Thank you very much
You are welcome!
I’d like to do the same thing with my gazebo but I hesitate precisely because of the bigger size (10x14) and the wind which sometimes blows quite strongly.
Even the cheapest hardtop models on the market have a much more robust structure and hardware.
So, after more than 2 months, is everything still okay with your 10x14? Did you make any other changes?
What a wonderful job!
Thank you
Thinking of doing this soon! Waiting for some restrictions to be lifted before I head to the hardware store though!
Great info. Thanks for helping me solve my problem
You are welcome.
Was this formerly a soft top or hard top canopy?
Great video. Thanks 🙏. From Montreal 👍
Thanks! ...from Ile-Perrot
Nice greenhouse. Hope you live in a very cold weather climate.
Quebec is cold
Thanks for the video, I was hoping to see how you climbed up to the the screws all the way to the top.
I have a gazebo roof that i want to replace but for the life of me I can't figure out how to climb on top to take off the old panels and then get up again to put the new ones without falling through.
You put panels in sections attaching them as you go. Simple.
Cutting 2 angles is called " A Compound Mitre"
Not in this project
Looks Great! Thanks much1
Very helpful, thank you!
You're welcome!
Great job! How is the noise when it rains? I want to do this to our gazebo but it is right outside our bedroom.
I didn't notice any unusual noise when it rains. After all it is plastic, not metal.
Hello Robert, your roof on the gazebo inspired me and my husband to do the same. We have some questions about installing the panels, where did you start and where did you measure from and make your cuts from......panels , flashing..etc. 10x12 To start out with!
Start in the middle. It will be easier to keep it straight. Go left and right from the middle. At the corners continue from the sides with corrugation, valley to valley, top to top. It is challenge to go around and meet the corrugation at the end. Choose the end corner that is less visible. I was off by less than 1/4 inch at the end. The panels are in different lengths. Choose those that will allow for less cuts and leftovers. Good luck!
@@robertdeptula2003 Thank you for the quick response.....my husband is placing the panels at the top marking and cutting for placement. so now the edge of the top will be uneven and long in places. His plan is to finish by trimming all panels all the way around. We have a bet! I believe that all cuts are only at the top. Did you do all cuts from the top, and if not how were you able to get such an even cut along the edges?
If it survives Quebec, it can survive New England. Going to try this. I wonder how to attach netting and fabric sides.
A very well edited video. Well done!
What are the dimensions of the major roof beams, 2x3 inches or the metric equivalent?
2.5 x 1.5 inches measured. I think they sell it as 3 x 2.
This looks amazing. Thank you for sharing. Just wondering how many sheets of Polycarbonate roofing did you need? Thanks.
Sorry, I don't remember. Good luck with your project.
Thanks Robert. It is detailed & informative.
Where can one buy the Polycarbonate roof in Quebec or Ontario?
The polycarbonate panels purchased at Reno Depot Vaudreuil.
Did you have any leakage at the screws? I'm having some issues with mine after following manufactures directions.
I bought screws from two different producers. The original Suntuf screws are OK, the screws from the other source rusted and I had one leak. Replaced the screws and everything is OK now.
I can you add extra weight to a Gazebo to prevent it from blowing over in the wind?
Great video..thanks..where do I find the metal corners?..I’m in QC also..
Home Depot @ Vaudreuil. I don't know the original purpose of this corner. Regards.
Great video! How exactly are the beams braced together at corners to prevent lift off under windy conditions? Screwed to the metal frame?
Panels are screwed to the metal corners and wooden beams. It is explained from 5:42 to 6:17. Three years ago we had 90km/h wind - no problem.
Amazing project. I’m planning mine soon. As I cannot take my Gazebo down, I will have to do it while it’s up. It’s gonna be challenging. Do you think it’s feasible? I wish you have listed all the needed materials. Thanks for the 2nd video. You posted it at the right time :)
My neighbor's roof (on the still picture in the video) was done without taking it down to the ground. We put a piece of plywood on top of the jacuzzi inside and worked from there. You have to remember to use a big piece of plywood if you need to get on top of the panels to spread pressure evenly. For the materials, everything is mentioned, with links, somewhere in the comments to the first video when I answered questions. The only thing that I couldn't find the link to was the metal corner. I bought it in Home Depot Vaudreuil, Quebec, Canada.
Robert Deptula you’ve been very helpful. I will use a ladder. It’s not gonna be simple especially when I will be doing it alone. Thanks again.
Great Video, where where do you buy all the Pannels and is there any diferences in colors or it doesnt matter? thanks
I bought the panels @ Reno Depot. Besides the colour that you see in this video there is also white.
Thank you so much for the excellent video. My soft top is a few years old and I am debating on buying a new top? replacing with hard top(like you did) or going the expense of of adding a 3 season room. I am told the 3 season room would be much harder to place on the deck because of the deck legs? apparently the walls of a 3 season need to be anchored to the ground. I am only planning a 10 x 10 as this divides the deck at the stairs leaving a screened room on one side and open air on the other. You video makes me think a new top is really all we need, at least for now. How is your gazebo hold up? What year did you build it?
This summer will be four years. It holds excellent, no cracks, no holes. Snow, rain, wind, sun. Panels look like new.
@@robertdeptula2003 thank you, that helps alot, assuming there is no supply issues, i will see what i can do in the spring or early summer. thanks again and enjoy your wonderful gazebo.
You are welcome, and thanks.
What metal braces did you use at the Middle and Top corners? Is it a T or 2 pieces joint together to form a T? I bought some T’s but they won’t be easily bent. What type of wood paint did you use?
Those are Ts. I used vise and hammer to bend them. You need those Ts to be strong.
The paint is universal for wood and metal in a spray can. Don't remember the brand.
Where do you get the panels to buy the
Reno Depot Vaudreuil
Nice idea. Is there a diagram for the framing of roof?
What r the roofing screws called?
Thank you for your good words. No, I don't have any diagrams. It was a "cut as you go" project. The screws are sold by the same company as the panels. In your home improvement store, the screws should be next on the shelf to the panels. Good luck!
Great video Robert, thanks for posting. I have a very large steel cabana with metal roof. The weight of the snow has bent some of the rails over the years. I installed six patio doors around the perimeter which gives it more strength but I'm still concerned about the overall weight especailly with the snow load, and I'm tired of taking the snow off all the time. I was thinking of doing exactly what you did although I may screw the panels right into the exsisting steel beams. I suspect the snow just slides off in the winter? Do you find it too warm if the sun is out? I installed reflective layer of styrofoam under my metal roof. The metal roof got so hot in summer you would just bake like sitting in an oven. I guess my biggest concern would be the heat (although great in spring and fall) and perhaps a hailstorm hehe. I must say it looks really nice!!
You can buy white panels that will not heat up so much like those in the video. The snow stays on the roof, but the panels are strong and don't bend. As soon as there is a little bit of sun the snow slides off of the roof. In "about" section there is my e-mail. Write to me and I will send you some winter pictures of the roof.
@@robertdeptula2003 Thank you for the reply Robert much appreciated. I will send a few pics as well.
I am looking so hardly to find someone who does this job in ottawa.
Would you kindly post more pictures of the inside, the framing? I’m trying to copy your design and process with my old metal gazebo that no longer has the metal roof frame. Thank you.
In the "about" section of my chanel there is my e-mail. Communicate with me via this e-mail. I will send you additional pictures this way.
hello，thank you for posting this great video, could you please let me know where you buy those polycarbonate panels? I checked the prices from those retailers, they are all overpriced! Thank you very much
Reno Depot
Why do we need to add those bins? Can I just use the original metal strucure that was used to support the fabric cover?
I am not suggesting how anybody should do it. In this video I share my take on it.
The reason I didn't drive the screws to the aluminium frame was that I didn't want to weaken the structure making many holes in it. I preferred to brace wooden beams to the metal frame and drive all the screws to the wooden beams.
What you will do is up to you.
Great work. I Will prefer to not make holes in the coated aluminium with steel screws. Also. I also want To make it stonger. Thanks
wonder how long the panels will stay clear before they cloud up due to oxidation
Me too. So far so good.
Do you cover it during winter?
No
Where did you get the steel panels on top
Home Depot. I don't know the purpose of those aluminium corners, but they work perfect.
I didn't have a Gazebo for the longest time because those cloth tops are notorious for tearing. I found a used gazebo in great shape for cheap, without the cloth top, and bought it with plans to do exactly this. I am also from Quebec. Where did you finally buy the panels? Are they polycarbonate or PVC? PVC is cheaper, but I am worried about it's ability to survive a winter. I am expecting a hard top roof like this to cost between $500-$700?
Those are polycarbonate. I don't think that PVC will hold for the winter. I bought the panels at reno depot. From time to time they have 20% off when you spend a certain amount. If I remember well the panels cost me about 350 - 400.The steel corners are from Home Depot. Good luck!
@@robertdeptula2003 HAHA! Great minds think alike. I told myself I would wait for that exact same sale! Thanks for the input.
What were the measurements of the panel cuts
Panel cuts depend on the specific model of the gazebo. Measure your gazebo, check what size panels you can buy and this way determine what cuts must be made in the specific case. It is not one size fits all.
How does polycarbonate work in summer time? Hot?
It is not like a tree shade. But you have the choice of colors. Transparent white will bounce off sun rays better.
What is the total price ? For material?
I don't remember the price. Your cost will depend on where are you located. In US it will be cheaper than in Canada. I am in Canada and my local home improvement store has 20% off sale from time to time.
Robert Deptula Thanks for a very helpful video. You are very generous man. Do you think I could do it for about $200 or less? How long did it take you to complete?
Just the cost of panels was about 350 - 400 Canadian dollars.
If I find anyone doing this job in Ottawa.
Good luck!
I live in ile bizard can you come on help me with my project
Sorry, but no. Just back home from hospital after stroke.
My friend. Can you come over and help me with my project.
Where are you?
I did it myself thanks to woodglut.