Awesome Cyberpunk Case For The Raspberry Pi 4 - Pironman by Sunfounder
ฝัง
- เผยแพร่เมื่อ 21 ธ.ค. 2022
- Today we're going to be taking a look at the new Pironman case by Sunfounder for the Raspberry Pi 4. The case is a similar form factor to my original Pi desktop case but includes some nice new features like a power button, addressable RGB LEDs, fan control, a custom OLED stats display and integrated support for an M.2 SATA SSD.
ADDITIONAL INFORMATION
---------------------------------------------------
Get your own Pironman Case from Sunfounder's Web Store - bit.ly/3Wj0kuP
Get your own Pironman Case from Sunfounder's Amazon Store - amzn.to/3G9Vj1N
Visit my blog for the written review - www.the-diy-life.com/awesome-...
Try my OLED Stats Script - github.com/mklements/OLED_Stats
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi 4B - amzn.to/3e0BL52
Pironman Case - amzn.to/3G9Vj1N
32GB Sandisk MicroSD Card - amzn.to/3XTJwfb
M.2 SATA SSD - amzn.to/3tt1iI2
Tool & Equipment Used:
Electric Screwdriver - amzn.to/3aOeDVa
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section. - วิทยาศาสตร์และเทคโนโลยี
Just found my next weekend project! Thanks for the guide!
great review and build
A fan cooling strategy that results in a case with slight positive pressure helps keep the internals clean as it's less likely to suck dust in from the outside. Could be another reason for having identical vent holes on both sides of the case.
This only really works if you're filtering the intake air as well. The fan is drawing air in through open vents anyway, so dust is going to get into the case.
@@MichaelKlements Good point!
Wow, this Pironman case would go great with my other desktop rpi's! Just gotta get the money
While I found the case to be incredibly impressive, and super fun to build. I encountered difficulties in maintaining a consistent overclock due to it. Each time the fans activated, the system would experience crashes. The root cause of this issue remained elusive despite my efforts to identify it. The jumper system is a bit all over the place. I am sure it had something to do with that, but I gave up. As a resolution, I eventually transitioned to the Argon V2 case, which successfully passed all stress tests using the exact same overclock settings that had posed problems with the Pironman case.
Glad I seen your reply. Was thinking of going for this case, but also have the Argon in mind as well. Think I will go with Argon.
@@tonywright8342 I'm very happy with mine. I reached out to the makers of the Pironman case, got a replacement case, and the same situation. I am confident there is something not optimal about the design of their case. I just wish I could pinpoint what it is.
hi.. Great Vid. Thankyou.
may i please ask which is best ssd for this case. will need for tons of pen testing and learning. need fastest 256 gb that fits inside the case.. kindly make a suggesion
Thank you for your designs! But I am still searching for the case with 2 m.2 slots for RAID and 18650 battery USV. That could be the ideal NAS for home storage where is no need in high speeds for me...
I've just taken delivery of this a couple of days ago. There is a glitch whereby if the pironman script is running, it interrupts video play and audio output. I emailed support and was told they are aware of it. The PWM used by the RGB light conflicts with the system's audio PWM. Switching audio output to HDMI didn't solve unless you hook up a USB audio to output the audio. Great review anyway.
Thanks for pointing this out, I'll see if I have the same issue. I didn't notice any issues with video playback but I didn't have any audio connected at the time.
@@MichaelKlements I found out another issue whereby the RBG lights and PWM fan turn off by itself after about half an hour. They didn't come back on even though the temperature has surpassed the designated point in the config file.
------------------------22/12/23 11:20:36------------------------
pironman version: 1.2.0
username: pi
config_file: /home/pi/.config/pironman/config.txt
22/12/23 11:20:36,828 [DEBUG] power_key_pin : 16
22/12/23 11:20:36,828 [DEBUG] fan_pin : 6
22/12/23 11:20:36,828 [DEBUG] rgb_pin : 12
22/12/23 11:20:36,828 [DEBUG] update_frequency : 0.5
22/12/23 11:20:36,828 [DEBUG] temp_unit : C
22/12/23 11:20:36,828 [DEBUG] fan_temp : 50.0
22/12/23 11:20:36,829 [DEBUG] screen_always_on : False
22/12/23 11:20:36,829 [DEBUG] screen_off_time : 60
22/12/23 11:20:36,829 [DEBUG] rgb_switch: True
22/12/23 11:20:36,829 [DEBUG] rgb_blink_speed : 80
22/12/23 11:20:36,829 [DEBUG] rgb_color : 0000FF
22/12/23 11:20:36,829 [DEBUG]
22/12/23 11:20:36,846 [DEBUG] rgb_show
22/12/23 11:20:36,848 [DEBUG] rgb_show: flow
22/12/23 11:39:06,452 [DEBUG] error
22/12/23 11:39:06,452 [DEBUG] [Errno 24] Too many open files
pi@raspberrypi:~ $
The log file of pironman when the error occurred.
@@limseehong any solution?
The case would work pretty well with the Indiedroid Nova. You won't have to use the SD ribbon card, but everything else seems it would fit. I reached out to the manufacturer of the case and they stated that it was supported, which I understand where they're coming from. Either way it wouldn't take much to get it to work.
Shout out to the little display's ribbon cable and connector! 😆
Hello and thanks for the video...could you write how to change the sequence of the leds
Thank you..greetings from Florence
Hi I have a Few Questions,
The white colour connecting wire strip for the GPIO Brindge, it keeps coming out from both end. Is that supposed to be that loose.
2) the micro sd card is not fitting inside and I’m afraid to put too much pressure on it. Does that work like same regular phones sd cards slots where it makes like a clipping sound as it goes in and to pull it out it required to slightly push in and it comes out with a clicking sound both times.
3) there’re 4 thermal pads, are there 2 spares or do I need to put the remaking on the raspberry pin right where the thermal top tower is fitted. Please note, if I only put two thermal pads on tower base and fit it on to P of pi I noticed there’s some space between the Towers thermal pad as well as raspberries processor. Is that space normal or do it need to put the thermal pads in the processor as well as tower and sandwich them so there’s no space.
Kindly address these concerns at the earliest possibility thankyou.
If you can healp that would be great. I've got the case as well with a pi 4 8GB. I have installed the pironman files and the screen and lights come on a change properly but when I do a reboot either through the shutdown command or long press the power button it won't come back up. Some of the board light come on but there is no internet connection to remote to and the case screen and rgb light don't come on. Any ideas? also I have connected a monitor but there is no output.
Michael, best regards. What recommendation do you have to control the temperature of Lattepanda Delta 3 to use it as a gamer?
The Delta 3 has pretty good onboard cooling, just make sure that it is well ventilated (don't block off the airflow paths if you put it into a case). Alternately, adding a larger 100 or 120mm Noctua fan on top of the Delta 3 would probably also improve temperatures.
@Michael Klements awesome video I am sold time to order my one, I got a question which OS did you use for it ?
I used Raspberry Pi OS - the software for the display and lights only works on this OS
Just picked this case up off Amazon. Decided to finally use the pi4 model b 2gb my friend bought me years ago.. back when microcenter had it on sale for $35. Figured a mini PC case felt better than mounting it on the 7" eviciv touchscreen monitor. The biggest question I have to ask myself right now is... How to use the pi.. maybe pi-hole to get started.. but I can run other things too right? XD
You can run any program you want on this box. It can be a 3D Octoprint machine, a file server, Homebridge, a desktop and more.
In regards to the fan on the side panel, could you use washers to raise it just enough so it doesn't hit the acrylic side panel? I agree, the sticker showing isn't great.
Yes you could quite easily fix the problem with washers, or I thought about just laser cutting the hexagon pattern out to make an open vent. It's just not something that can be done with what is included in the kit - and the fan really shouldn't be like that either, the hub should always have some clearance between it and the face.
Works pretty well with RetroPie?
I think power and other side io should go to back side using some pcb connectors
hi mike, can i ask u how do u installed the raspberry os on the ssd?
Here's a guide to do that - th-cam.com/video/a8nzkLryGmM/w-d-xo.html
Did you try it with wireless peripherals and ssd connected at the same time...? I have a Microsoft keyboard connected to it and it seems that the voltage is not enough for the keyboard to work properly. Please help
Yes, this was all done with a Logitech wireless keyboard and mouse
@@MichaelKlements Can you tell me what exact model of Logitech keyboard, the one I have jerks and does not work correctly with the pironman case
Hello, i have a question, can i use RASPBERRY PI 4 4G RAM?
Could you use a 3.5 inch screen on gpio?
Hello, do youuhave a design that works with the piJuice + a fan? the piJuice UPS HAT (which sits on top of the pi via gpio) does have specific button that are no longer available if the case is not built for it. @Michael Klements
Having the cable come out of the side like that isn't ideal.
It is a bit disappointing that all of the other cables are now routed to the back except for HDMI and audio.
@@MichaelKlements well done for keeping cool with all these knock offs of your hard work.
Agree would be ace to see a design of yours which uses a an expansion board to put all the hdmi etc to the back too.
Nice review Michael. Btw These will be in my Aussie Pi-Mania store soon.
I'm good for my Pi 4s for now...but something like this would be awesome to get with a Pi 5...whenever that comes out! :)
I like trying to figure out how to change color of lights
Interesting, this kit transforms SBC in MBC. The case is really impressive, however I will question - who is the target audience? Very unlikely somebody uses Raspberry Pi as a main computer, even for a home theater it's a bit underpowered. So the case is just a nice toy to impress your friends.
Hello. there is an IR port there. how to use it? where can I get the remote control? buy separately?
I would've used washer spacers for the fan
are raspberry pies capable of booting up on windows OS? just curious...
There was some support in Windows IoT edition. Not sure how usable it is other than for basic control of I/O pins for control and monitoring applications.
Can you unbox and build a Raspberry Pi 4 destop kit?
Which desktop kit are you referring to?
@@MichaelKlements the Raspberry pi 4 kit
Hi
It is compatible with Rasbperry pi 5?
Unfortunately not, they swapped the Ethernet and USB ports around on the Pi 5
@@MichaelKlements 🥹😰😢😰😰
its a nice case - but it would have been nicer to route all the side cables to the back
I can see the nyan cat case coming soon 🤣👍👋
Haha
I wish I could find a reasonably priced Raspberry Pi
Hopefully next year!
what the hell put some spacers to put the fan the way u want it. O-rings
It's an easy fix - but the fan shouldn't be made this way or spacers should be included with the kit.
Too bad Raspberry Pi are still so overpriced though...
Sweet review as always :)
Have a great weekend ahead Michael
Hopefully they'll be back to normal next year. Thank you, you too!
i wish raspberry pi foundation weren't such bootIickers
can you play games on that
????
the price soaks
Hello, brother.
Give me a raspberry pi casing
Please please please please 🙏🙏🙏
Eletrocookie much better cuz this sunfounder case ugly and look like 90s pc case :(