Wiring Frames with Fishing Line, Tying Fishing Line into Bee Frames

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 เม.ย. 2017
  • Wanted to make a video about tying fishing line into frames.
    All of the other methods I saw take too long and are to complicated.
    Thank you for watching! Please like and subscribe and leave a comment below!
    Website : MyLibertyHomestead.com
    Facebook: / mylibertyhomestead
    Facebook group to ask questions and talk with other members: / 1699577733692411

ความคิดเห็น • 20

  • @eastsussexbeesandwildlife5801
    @eastsussexbeesandwildlife5801 4 ปีที่แล้ว +2

    Brilliant. I have never seen this before so will give it a try. Thanks, Peter, East Sussex, in jolly old UK. Hope is all well with you good folks in the States

  • @ItzKatGramacy
    @ItzKatGramacy ปีที่แล้ว

    Thanks, you made an aggravating job easy!

  • @dennisanthony8335
    @dennisanthony8335 3 ปีที่แล้ว +2

    I use 30# test and a staple gun, work great and much faster

  • @raysgbg
    @raysgbg 7 ปีที่แล้ว +5

    If you use two little nails...run the tag end like you did there, and wrap it around a nail and drive it down...then you can pull your line tight enough by hand, wrap it around another nail and drive that one down, and cut your line. Faster than tying the knots. Good video.

    • @homebrewsorcery6158
      @homebrewsorcery6158  7 ปีที่แล้ว

      Thanks, you know I tried that and for whatever reason I get these done faster. Thanks for sharing, be sure to subscribe!

    • @privatebubba8876
      @privatebubba8876 6 ปีที่แล้ว +1

      That's the way I do it too ORM must faster for me. I use 30lb test that you can really pull tight and the bees don't chew it in half then coat it with melted beeswax using a hobby paint brush.

    • @royreeves4081
      @royreeves4081 6 ปีที่แล้ว

      I read that there's a toxic lubricant used on mono filament fishing line, it's for sure on eagle claw line I asked the factory rep.

    • @privatebubba8876
      @privatebubba8876 6 ปีที่แล้ว

      Roy I clean my mono filament with alcohol to remove any lube applied by the manufacturer. It's squeaky clean when I use it before coating it with bees wax.

    • @royreeves4081
      @royreeves4081 6 ปีที่แล้ว

      private bubba does this really works if so I will use it for I have fishing line and bee fram wire isn't cheap of readily available to me ps if I don't coat the line in wax will they chew it up?

  • @bud5084
    @bud5084 3 ปีที่แล้ว +1

    My bees chewed 20# test into and pulled it out of the hive. I use small stainless steel wire.

    • @jamesbarron1202
      @jamesbarron1202 2 ปีที่แล้ว

      I wonder if they can chew thru 50 lb braid. Regular scissors have a hard time cutting it unless you use scissors made for braid or small wire cutters.

  • @eddiefleetwood2945
    @eddiefleetwood2945 ปีที่แล้ว

    Two questions:
    1) How does the fishing line hold up to extractors vs. wire?
    2) Have you tried anything else other than mono such as braid?

  • @martaylola
    @martaylola 3 ปีที่แล้ว +1

    Hi, how do you put the wax in the fishing line?
    By the way , Great video!!

  • @dennismyers3020
    @dennismyers3020 5 ปีที่แล้ว

    You all the bees can cut the fishing line, just so you all know

  • @danielgriff2659
    @danielgriff2659 3 ปีที่แล้ว

    I recommend copper wire. I see no advantages to fishing line.