As a fellow fabricator and installer, this is TRAGIC and they’re lucky that car didn’t ignite.. But sometimes you have to blame the customer because they rather pay less and get this instead of doing it right the first time! This could’ve definitely been avoided
I can't believe on the sub wire is small gauge and eletrical taped to larger gauge. That is so funny. I can understand starting with larger gauge wire and then having to use smaller, but not smaller to bigger 😂! The after though looks factory, Good Job! Pllus the before looked like a RATS NEST!
I have an LC2i Pro, I can run off the factory premium sound 8" sub correct? I tested voltage at 40hz and good from flat to +4 without roll-off happening until 32-34 out of 40 where the pro is supposed to pick it back up? Also since I am inly going to use the factory sub I am supposed to go into the left input on the pro according to Car Audio Fabrication? Seems all correct with my knowledge of car audio implemented as well. I like to hear what others have to say as well. It is all education to me!! Thank you in advance!
Please tell me that this was done in somebody’s backyard by the owner and his friends who know nothing about installing sound systems and not some shop. I refuse to believe that a shop would do that.
Now that’s what you call the hook ‘em up special 😂 you have to spend money to get it done right I deal with that all the time because they want to save money oh boy
Im lookking for someone to intall, my audio control dm 810 and 2 down4sound amps in my 2018 honda accord ex-l. Can you do that? and can you tune the DM 810 DSP??? Iclose to you in bloomfield
Why would we change the radio ? We get perfect signal using the dsp and we get to keep the oem fit and finish of the dash and all the factory features working . Just like when we do bmw and Mercedes ( the radio can not be changed in these cars . Pretty soon Honda will go to an all digital dash as well and the radio won’t be able to come out . So shops need to learn how to integrate.
I have the same Honda Accord - I get a quick static noise every 15-30 seconds on front speakers with the AC ON only...I believe is when the ac/fan kicks ................ AC off, I hear no noise weird?
@@NVSAUDIO honestly when I do my fat matting I'll reroute my wife's this way as well I had forced them underneath the carpet by cutting it and pulling it through I got it going under the seat to a distro block. And from there everything is the proper gauge and wires etc.
As a fellow fabricator and installer, this is TRAGIC and they’re lucky that car didn’t ignite.. But sometimes you have to blame the customer because they rather pay less and get this instead of doing it right the first time! This could’ve definitely been avoided
You never cease to amaze me with your outstanding work 🙌🏾.
That's before install was such a shame. Well done on the fix!
That first one hurt my feelings I’m mad they left him like tht buh im glad they fixed it
This was a great video! 2017 Accord here, looking for info to replace the awful 'premium' audio sub.
Thats a home install
Btw why did you put a fused block with the ground wire with a tap screw?
I can't believe on the sub wire is small gauge and eletrical taped to larger gauge. That is so funny. I can understand starting with larger gauge wire and then having to use smaller, but not smaller to bigger 😂! The after though looks factory, Good Job! Pllus the before looked like a RATS NEST!
I have an LC2i Pro, I can run off the factory premium sound 8" sub correct? I tested voltage at 40hz and good from flat to +4 without roll-off happening until 32-34 out of 40 where the pro is supposed to pick it back up? Also since I am inly going to use the factory sub I am supposed to go into the left input on the pro according to Car Audio Fabrication? Seems all correct with my knowledge of car audio implemented as well. I like to hear what others have to say as well. It is all education to me!! Thank you in advance!
Holy crap what a mess. I’m surprised the car hadn’t caught fire
Damn that initial install was almost criminal negligence. Very cringy. Glad you guys stepped up and cleaned it up for the customer.
Just, WOW!!!
are people really paying for installs like this damn. watching your videos i have re➗installed all my systems 🤣🤣🤣🤣
Please tell me that this was done in somebody’s backyard by the owner and his friends who know nothing about installing sound systems and not some shop. I refuse to believe that a shop would do that.
This video was good! I subscribed!
Now that’s what you call the hook ‘em up special 😂 you have to spend money to get it done right I deal with that all the time because they want to save money oh boy
How much do you usually charge for a wire rescue ?
Im lookking for someone to intall, my audio control dm 810 and 2 down4sound amps in my 2018 honda accord ex-l. Can you do that? and can you tune the DM 810 DSP??? Iclose to you in bloomfield
how many watts going into that single 12"
? Did you wire the loc to the front speakers? And is that recommendation on Hondas?
He never said huh??
the mirrors and trunk , I would hate that shit to the fullest, batman slapping the shit out of Robbin
Ya upgraded everything except the radio 🤦♂️ that the most important part 😅
Why would we change the radio ? We get perfect signal using the dsp and we get to keep the oem fit and finish of the dash and all the factory features working . Just like when we do bmw and Mercedes ( the radio can not be changed in these cars . Pretty soon Honda will go to an all digital dash as well and the radio won’t be able to come out . So shops need to learn how to integrate.
Hi, NVS. What is the right way to put the cable from 𝑩𝒂𝒕𝒕𝒆𝒓𝒚 to the amplifier?
If they charge him for that he’s crazy I wouldn’t pay for a job like that
I have the same Honda Accord - I get a quick static noise every 15-30 seconds on front speakers with the AC ON only...I believe is when the ac/fan kicks ................ AC off, I hear no noise weird?
How do you adjust your subs from the factory radio?
I just wanna know what this work cost...wanna get my system put in
That was not a shop. That was someone’s backyard or a park
Nice bro
100000 times better
Where is your shop
Carlos I don't know what you charge this customer but you should have charged them more.
Schmik 👍
WoW The No Fuse Culture.
👍
where did you run the power wire ?
We pulled the seats out and ran it under the carpet
Where did the power wire from the OEM battery enter the car? Yall use the OEM grommet behind the fuss block?
@@NVSAUDIO honestly when I do my fat matting I'll reroute my wife's this way as well I had forced them underneath the carpet by cutting it and pulling it through I got it going under the seat to a distro block. And from there everything is the proper gauge and wires etc.
Surgery time wow!!
This video is why I work on my cars. There is ZERO reason the shop that produced this work to be in business.
Dude..C'mon....this has to be a self install. Call the shop out.
Dayummmm....
@Antoine Banks i said the same thing. I would be pissed
No way this was a paid job.... 😅 This just looks like the owner did all this.
Lol 😂 whoever did that ran out of wires
Wtf 😂😂
I would have done worse! That's why I just take my car to pros. Can't blame the owner for trying though!
It’s no way I think that customer did that him self if not the that shop needs to be sued
😅😅😅😅😅😅😅😅
His buddy did it for "cheaper"
That's insane
did best buy do this? JK! You cant make this stuff up...That is sad/funny at the same time.
BRO.....no way an actual shop did that id fn sue them for my money back...he probably did it himself....
To much bass for my taste.
Lol
🤦🏻♂️😂
Fire chief wld give owner a fine for that 🤣
Jesus super mess fire hazard wow