Most complained about about music taking over engine sound, but I say the video is amazingly composed, the shooting angle and technique has professional touch
Thank you so much! Most of people dont understand that while filming onboard fast moving boat the only sound I can get is wind blowing in microphone. With only Canon DSLR it is impossible to get engine sound in that speed.
Thanks for the realistic video of a great looking model boat. Keeping it looking real jumping waves & flying in the air. Awesome video 👍👍👍👍👍👍👍. Next it would be even better if you had another boat running with you in that setting. I will subscribe in anticipation of your next big production.
What an amazing production, very well done on the editing work, good enough to be broadcast on the BBC! Very nice boat, my Makara 52" boat should be ready in a month, watching this clip makes me envious to be on the water!
Well done, great editing. Don't worry about those who didn't like all the great shots of those lovely outdrives and other bits, they are the same people who don't want to see the girl undress and only want to see her getting shafted.
hienoin Rc vene mitä oon nähny tommosilla vetolaitteilla ja ootte tehny erittäin hienosti et saatte yhdellä koneella 2 vetolaitetta pyörimään. Me tehää ite Rc vene polttomoottorilla mut tota ei koska tossa menee tosi kauvva ja liian hieno. 👍🏻👍🏻👍🏻👍🏻
Hi! Really like your video. A friend and I are building an rc boat too. It will be powered by 2 chainsaw engines. 50cc each. What kind of gear ratio do you use? our engines will go up to about 7000 to 8000 rpm under load. Already thanks for the answer! Jort
37-38 knots. MHZ Hunter is "semi-scale" and is not suitable for higher speeds. Of course you can drive it almost 60 knots like Powerpete do, but I believe it is not funny anymore. Scale boats are for cruising, not for racing. Check out youtube channel "Powerpete2", there is video called "MHZ Hunter Pier 57 Electric". Powerpete has 5kW raw power there :D
I use 2 -15kg cm servos for steering, 6719 4 blade prop, and modified K30 engine. I am now getting 45 mph straight as an arrow, turn at full speed left but I cannot do right turns unless I slow down to 1/5 speed.
nice video even 10years later! the Fountain V-hull is the best! cuts waves like nothing else. nice too see someone keeps speed realistic. did u make it or buy it?
Johny, I love this video. Subscribed. I have a question for you sir. I have a CRCH 58" fountain with a Z drive as well but I have problems turning right only it hooks right badly but never on a left turn. What servo or servos and prop are you using? if you were to use a single Z drive would you hang it with the bulb POINT of your Z drive in line with the keel, above the keel or below the keel? Mine is in line with the keel. I would really appreciate any answer you can give me.
Where is too much post production? At the beginning? I think that the post-production is more than just cutting. And as I said for Dave, I dont have good microphone. In original footage you can only hear the wind becouse this vid waa filmed onboard a real boat. Thanks for comment. :)
Mors! Laskeminen lopetettiin siinä viiden tonnin paikkeilla, oliskohan tommonen kaikkineen karkeasti 6000-7000 euroa. Runko on MHZ:lta. Ihan palasista itte väsäämään vain :)
Maybe you dont see where this vid was filmed? Yeah...Onboard moving boat. Only thing you could hear is wind. I dont have ultimate professional microphone. If you want to sponsor and send me one, I would be very grateful and I promise that in next video there would be more engine sounds. :D I prefer music if the alternative is the sound of wind.
Oh and I still have a dream.. to build MHZ Mystic (94,5") with two Jetcat turbines. Miss Geico color scheme, working lights and doors and trailer & truck. Then I want to make new video, it would be awesome. It is just too expensive and I need many sponsors for that. Like MHZ, Jetcat etc.
Most complained about about music taking over engine sound, but I say the video is amazingly composed, the shooting angle and technique has professional touch
Agree!
Thank you so much!
Most of people dont understand that while filming onboard fast moving boat the only sound I can get is wind blowing in microphone. With only Canon DSLR it is impossible to get engine sound in that speed.
irwanadinatha
@@Hiilihapotus I have a 600D and i get the sound when the boats are moving fast what about the time the boat with people in it was at rest?
@@Casey6996 Well good for you! Now just go and make some awesome videos with your camera. 💪
Top speed is something like 40-43mph (65-70kmh) (GPS). Its all about props, weather, temperature, moon location and distance from earth to sun :D
hey i like your rc boat, i hope you want to share picture of your rc boat because i play rc boat too...
must have a good silencer did not even hear the boat at full speed
Thanks for the realistic video of a great looking model boat. Keeping it looking real jumping waves & flying in the air. Awesome video 👍👍👍👍👍👍👍. Next it would be even better if you had another boat running with you in that setting. I will subscribe in anticipation of your next big production.
Everthing you have shown in this video (The Boats, The Music, The "Making of" your Video !) is AWESOME !!!
That has to be the best in scale boat i've ever seen. even the way it reacts as the waves come by is perfect. congrats
Awesome paintjob on that Predator! A real beauty... nice shots too...
What an amazing production, very well done on the editing work, good enough to be broadcast on the BBC! Very nice boat, my Makara 52" boat should be ready in a month, watching this clip makes me envious to be on the water!
Beautyful, it looks, floats and handles like a full size racing boat!...
The best footage i have ever seen on youtube about rc poerboats...and i have hundreds of them on youtube in my "favourite" folder.
Daniele
That's possibly the most buetifull RC boat I've ever seen
Great boat. I love how it handles the chop. Great hull design and good trim. Thumbs up!!
Well done, great editing.
Don't worry about those who didn't like all the great shots of those lovely outdrives and other bits, they are the same people who don't want to see the girl undress and only want to see her getting shafted.
Looks great and nice video edit. Just picked up a used Proboat Blackjack 55 and cant wait to drop it in the water.
That looks really cool and fast! Nice boat man!
What a beutiful video! And Cafe del Mar did add its thing too :)
out of all the boats ive seen, this is the sweetest!
Perhaps the amazing video and perfect boat I've ever seen !
wow, so beautiful nice work..... thanks for sharing
Awesome boat can you provide me the name of the background music
Cool vid boat, I can almost envision Crocket and Tubbs in the cockpit chasing down some dirty Cuban drug smugglers
Beautiful boat where can i buy one at ....!? Ready to run please help me out
hienoin Rc vene mitä oon nähny tommosilla vetolaitteilla ja ootte tehny erittäin hienosti et saatte yhdellä koneella 2 vetolaitetta pyörimään. Me tehää ite Rc vene polttomoottorilla mut tota ei koska tossa menee tosi kauvva ja liian hieno. 👍🏻👍🏻👍🏻👍🏻
One of the nicest setups I've seen man great boat
Hi! Really like your video. A friend and I are building an rc boat too. It will be powered by 2 chainsaw engines. 50cc each. What kind of gear ratio do you use? our engines will go up to about 7000 to 8000 rpm under load.
Already thanks for the answer!
Jort
Very well done video - hats off to you indeed. Bravo, sir.
Nice little production
Beautiful boat.
Is there any pitcures somewhere to see it in big resolution?
How to make your boat make twice as much noise at the lake?
Chase it with another boat!
Pretty impressive either way!
37-38 knots.
MHZ Hunter is "semi-scale" and is not suitable for higher speeds. Of course you can drive it almost 60 knots like Powerpete do, but I believe it is not funny anymore.
Scale boats are for cruising, not for racing.
Check out youtube channel "Powerpete2", there is video called "MHZ Hunter Pier 57 Electric". Powerpete has 5kW raw power there :D
That editing is amazing
Hi nice boat good video which walbro carb is that please?
I have to say that was very nicely done. Slow mo at the right time. Good job.
DAMN those Z drives are absolutely stunning....
One of the best rc boat vids!
James Miller I could do without the music also!
Nice...First.video.ive.seen.with.the.MHZ.drives.running....Thumbs.up
I use 2 -15kg cm servos for steering, 6719 4 blade prop, and modified K30 engine. I am now getting 45 mph straight as an arrow, turn at full speed left but I cannot do right turns unless I slow down to 1/5 speed.
Beautiful boat bravo
Awesome ! What is the top speed of that beauty!?
thats the most awesome rc boat i ever seen!
nice video even 10years later! the Fountain V-hull is the best! cuts waves like nothing else. nice too see someone keeps speed realistic. did u make it or buy it?
Johny, I love this video. Subscribed. I have a question for you sir. I have a CRCH 58" fountain with a Z drive as well but I have problems turning right only it hooks right badly but never on a left turn. What servo or servos and prop are you using? if you were to use a single Z drive would you hang it with the bulb POINT of your Z drive in line with the keel, above the keel or below the keel? Mine is in line with the keel. I would really appreciate any answer you can give me.
That is a fast boat. Good job editing the film, but there isn't an "S" in cameramen.
do u know where I can get a boat like that
Awesome video, so lucky to be on a boat too. Love the slow mo, looks so realistic.
not sure which props you really need to look at the sizes compared to what you have on it now and go from there.
good movie my friend....
Need better props. Also trim needs adjusting you can blow your rings out if you keep the boat running wet
Love to have one of those drives on my boat.....Very nice
great cinematography
Where is too much post production? At the beginning? I think that the post-production is more than just cutting. And as I said for Dave, I dont have good microphone. In original footage you can only hear the wind becouse this vid waa filmed onboard a real boat. Thanks for comment. :)
Prop-shop. Uk. Awsome custom made props. Top quality and service.
NICE BOAT RC
Great video. Most RC videos are garbage. This is a masterpiece. Thanks!
This video is awesome thats a gorgeous rc
Mors! Laskeminen lopetettiin siinä viiden tonnin paikkeilla, oliskohan tommonen kaikkineen karkeasti 6000-7000 euroa. Runko on MHZ:lta. Ihan palasista itte väsäämään vain :)
Nice ride. Looks like a lot of fun man. Maybe include some audio of the motor. Also, is there two outdrives for the one motor?
great looking Boat, to bad there is no sound of it, just the short idling
Thats one nice boat 😀
I've watched this a thousand times
Nice boat man
genial, espectacular, tremendo.... me gusto
cool boat know where I can get one
nice video and nice boat!!
Awesome video man! Can't believe it doesn't have more views! Very professional looking, what editing program and camera did you use?
Absolutely love it!
NICE BOAT and nice video
Nice boat
if you are still looking for 5 blade metal props you can look at bonzi sports they have many props and ship all over the place.
fantastic! very good job!
Great videoing!
Hi Johny fantastic video pal, you've done an excellent job, well done!
Great video, very nice RC Boat. Looks like a scale model of a Fountain. How long is it?
Thank you!
Yes it is semi-scale Fountain from MHZ Powerboats.
182 cm long.
i hav 1 like dat btw if u sellin dat how much ?
GREAT VIDIO GREAT MUSIC !
Olala what a BABY !!
Nice video. A bit too much post production for me and it would have been ice to hear the engine instead of that lift muzak.
awsome video one of the best ive seen cool toy
did you build this boat youself? where did you get it or the parts to build it?
Awesome video 👍🏻👍🏻👍🏻
Great job.
Awsome video! Best I've ever seen. 🙂
sweet vid bud! that is a great looking boat! nice job! it looks real on the water. B>)
Great video man
Nice boat. U on the East Coast or West Coast? Good looking vid too.
where did you get this rc boat and when?
Thank you so much for posting that i couldnt find one any where :)
the cool thing about having an rc boat is hearing the engines scream. not hearing dumb music
nice use of a pocket bike engine :-)
Maybe you dont see where this vid was filmed? Yeah...Onboard moving boat. Only thing you could hear is wind. I dont have ultimate professional microphone. If you want to sponsor and send me one, I would be very grateful and I promise that in next video there would be more engine sounds. :D
I prefer music if the alternative is the sound of wind.
am trying to buy one or this race boat can .. some one send me a store link or address please i really need one
mhz-powerboats.de/info/Unsere-Firma-201.html
Thanks for comment!
I agree with you, it is too long.
I will do new vid in Summer 2013, shorter and faster. Michael Bay style :D
Wuts the top speed
not sure i have not ran those big of propsive only used smaller props for electric fe boats. search the web and you will find you answer.
Oh and I still have a dream.. to build MHZ Mystic (94,5") with two Jetcat turbines. Miss Geico color scheme, working lights and doors and trailer & truck.
Then I want to make new video, it would be awesome.
It is just too expensive and I need many sponsors for that. Like MHZ, Jetcat etc.
Thank you so much!
awesome !!!!!!!! nicee work
that was amazing
Thanks!
thanks for the info
where did you get the boat
FIT KID From MHZ Powerboats (in Germany): www.mhz-powerboats.com/shop/en