Vay vay vay ben inanın 22 ülke gezip 46 fuara katıldım ama bu devasa büyüklükte bir gerçek oyuncak tabiri ile tasarlanmış harika bir teknoloji ile birleşen henüz bir tasarım proje ile renklenen eser henüz görmedim,,elinize sağlık çocuklar harikasiniz
Awesome. Already made the boat. Now I need to contact the 2 girls to help me carry and put it in the water. Specially, the blonde with fancy outdoor pink fluffy slippers. 😂 nice boat.
Great video and build. Now I want to share a thought that I had for the people that can't afford this kind of amazing boat: when you view a boat from the shore, the size and speed is relative to the distance from the viewer. So in theory, you should be able to get equal pleasure from a smaller boat closer to you depending on other factors such as the sound, and water conditions etc.
@@mjodrnot necessarily ..its all physics: *balance and anchoring the weight in middle does it all* all it needs is a heavier center of gravity sooo 1 cannonball embedded in the middle of bottom with cork or spray insulation around it will do that *doesn't have to be huge*
@@americanlivesmatter-BmanWild Full scale offshore race boats use the same method with water ballast and pumps to tune it. But you aren't going to convince the top teams in the top classes to scale their 48-52 foot hulls down into the 30' range as long as they add a ton of ballast. There's a reason the fastest boats are longer. I live in a windy place. If it's over 15 mph wind I'm probably not going to take out a 16" hull if I had a 42"+ hull available no matter how much ballast I could add. The waves on our local waters get huge. What the OP said was valid, but unless it's a really calm day a small hull just to get a greater sense of speed at scale is just impractical.
Very nice video! What did you print with pla or abs? Surprised you didn’t do anything on the inside to reinforce the hull. Impressive drone work as well
To stop the porpoising you could install trim tabs which is on most of this beautiful style of catamaran racing hull RC's and then you can open up the throttle and this beauty will sit really nice on the water. Nice work though Cheers Mate 👍👍👍😎💨🏴☠☮☮🌈💡🔧
@CraftChannelYT hello would it be possible to have the weight of the catamaran at the end of the print because I don't know which engine to put in it because I already have an ESC of 150 a
@@CraftChannelYT hello I have just finished the complete printing of your boat there is a little problem with the cover the measurement they are not good at all can you also help Thank you I am waiting for your return
Hahahha, 🤩 This is an excellent video in documentary form. Every time you raise the bar even higher, Excellent design and craftsmanship. congratulations to the whole team. 🍻cheers craft channel.🍻
A great RC Boat build from 3d printed Body Parts. The main thing is it looks like factory built and also runs great. This was the promise of 3D printing machines.
Not gonna lie, the pretty girls is what made me initially watch(even though I KNEW they didn't build or control it). Thats just not what pretty girls do. I am really glad I did though. I love all things RC, 3D printing, and of course...pretty girls. Awesome job man! Thats some beautiful craftsmanship and one sweet boat!
That's an amazing work and project execution as always! Just waiting to see in your channel my 3D printed RC car, it will be awesome to see such a perfect work with my project too 😄
Bir rc tutkunu olarak yaptığınız işe ve işçiliğe hayran kaldım! Tebriklr çok başarılı! Bir sorum olacak Ender 3 ve Ender 3 v2 kullanıyorum bu tekneyi onları kullanarak baskı alabiir miyim ? :)
what an incredible project I watched this video a least 10 times I want to do it also do you think I can do it with a 220x220x250 mm 3d printer. Thanks for your great projects
Девченки на Ниве супер!!!👍
Чего не ожидал, так это Ниву!%)
I’m more impressed by the drone that was out running the boat.
Респект за Ниву.👍🇷🇺
С уважением.
@@CraftChannelYT дайте угадаю 95й год? как моя.
As she's turning the transmitter on I'm just thinking "shouldn't you have turned that on *before* you put the boat in the water?
Fabricating unreal videos is somewhat questionable.
The lady shaved arms after making the body of the boat.
Always,.. transmitter is on First!
Did she turn on the transmitter before or after polishing her nails. 😂
@@genekloszewski5484that was 200 years ago
I remember me commenting on the original build video how I am doing a large scale of this boat. Welcome to the club of huge scale RC boats
Vay vay vay ben inanın 22 ülke gezip 46 fuara katıldım ama bu devasa büyüklükte bir gerçek oyuncak tabiri ile tasarlanmış harika bir teknoloji ile birleşen henüz bir tasarım proje ile renklenen eser henüz görmedim,,elinize sağlık çocuklar harikasiniz
Muhteşem bir çalışma … izlerken nefesimi tuttum. Harika bir iş …
Great video 👍
Отличная работа!!!!
спасибо за ваш хороший комментарий
Beautiful, beautiful boat. Almost as beautiful as the two young ladies running it. How did the recording drone keep up with it ?
Great work . The drone videoing was awesome also . Have a blessed one .
Awesome. Already made the boat. Now I need to contact the 2 girls to help me carry and put it in the water. Specially, the blonde with fancy outdoor pink fluffy slippers. 😂 nice boat.
Toujours. Plus. Grand. Superbe
Beautiful video and boat !!😮
Holy mackerel ma’am, you sure got some hairy arms.
Extremely nice boat.
It belongs to her husband!😊. Don't you see those are male heands?
Blessings!
amazing build!
Hello, thank you very much.
Tebrikler her seferinde başka bir seyir güzelliği başka bir heyecan var.basarilarinizin devamı diliyorum.
Great video and build. Now I want to share a thought that I had for the people that can't afford this kind of amazing boat: when you view a boat from the shore, the size and speed is relative to the distance from the viewer. So in theory, you should be able to get equal pleasure from a smaller boat closer to you depending on other factors such as the sound, and water conditions etc.
Smaller boats require extremely calm conditions. The larger the boat the larger the waves it can handle.
@@mjodrnot necessarily ..its all physics: *balance and anchoring the weight in middle does it all* all it needs is a heavier center of gravity sooo 1 cannonball embedded in the middle of bottom with cork or spray insulation around it will do that *doesn't have to be huge*
@@americanlivesmatter-BmanWild Full scale offshore race boats use the same method with water ballast and pumps to tune it. But you aren't going to convince the top teams in the top classes to scale their 48-52 foot hulls down into the 30' range as long as they add a ton of ballast. There's a reason the fastest boats are longer. I live in a windy place. If it's over 15 mph wind I'm probably not going to take out a 16" hull if I had a 42"+ hull available no matter how much ballast I could add. The waves on our local waters get huge. What the OP said was valid, but unless it's a really calm day a small hull just to get a greater sense of speed at scale is just impractical.
@@mjodr or it *can* go 1000mph 😎 (I believe what you said about you live in a windy place) #ibet
Her defasında daha ileri bir başarıya imza atıyorsunuz ellerinize emeğinize sağlık tebrik ederim tek kelime ile harika
arabanın plakasından yabancı olmadığı belli oluyor
i m really having fun watching this video 👍
Perfect video ! 👍 perfect work 👍
One thing about this modular construction method is the natural floatation chambers that are created by the process
Pembuatan speedboat yang sangat keren kk
Wow! Amazing work, these projects just keep on getting better... 👍
Thank you so much bro for your nice comment and support.
Si può comprare il progetto?
@@CraftChannelYTsi può aquistare il progetto?
Muhteşem ötesi bir calısma bu nasıl bir kalite şapka çıkarıyorum 👏🏻👏🏻👏🏻👏🏻
İşçilik sanat çekimler muazzam tebrikler devamını bekliyoruz 🎉🎉🎉
Güzel yorumlarınız için teşekkürler. En kısa zamanda ziyaretinize geleceğim :)
Very nice build !!! Did the brunette tighten the hatch bolts incase the blonde broke a nail !?!😉🙃😎 NZ
Ya bu nasıl bir yetenek,nasıl bir sanat, tek kelime ile bayildimmmm. Ellerin kolların dert görmesin canım kardeşim👍🧿💜
Zor görünen bir araç yapımını bu kadar basit bir şekilde anlatmaları çok güzel 👍
Güzel yorumunuz için teşekkürler.
Incredible build, well done!
Awesome speed boat 👍👍👍
Yine mükemmel bir çekim ve mükemmel bir video olmuş , ellerinize sağlık
You guys got a nice boat
Yapıyorsunuz bu işi ellerinize sağlık muhteşem
Amazing very impressive rc boat
Elinize sağlık çok iyi bir proje olmuş
Harika çalışma elinize emeğinize sağlık....
Jolie demoiselle bisous ❤❤❤
THIS IS VERY COOL. AWESOME VIDEO!!!!!!!!
You made it very neatly, really great👍👍👍
Harika proje,her zaman ki gibi 👏👏👏
Thanks for the excellent video. Good luck!
Awsome work ! Well done my friend ! 💙 🚤 👍
I love your boat
Nice rc boat
Very nice video! What did you print with pla or abs? Surprised you didn’t do anything on the inside to reinforce the hull. Impressive drone work as well
Intriguing and impressive
Very cool. Well done.
Çok güzel
Goodjob no coment k
I enjoyed that...Thx
Bu iş bukadar 👏👏👏👏👏
I’m printing this same model right now, thought on a much smaller Ender 3; I like the surface finishing you did before paint.
Surprised he didn't fiberglass the hull, or fully bondo it. Is it still one piece?
That's sweet looking.
Awesome...now install FPV on it 🙂
Black with PLA? Brave choice but a cool project.
super buen video explicativo ... quedan cosas en el tintero pero esta genial!!
Great build and well made video. For me, the two girls did not add anything other than click-bait.
Very cool👍
nice work.
Beautiful work.
Very nice work near to perfection .... video and sound is amazing !
boat and girls both are very beautiful...
Superb! Thumb up
Like how *she shaved her arms before sticking it in the water* nice touch 😅
Cute girls, awesome boat, crazy Niva 😂 where did you find this car?
To stop the porpoising you could install trim tabs which is on most of this beautiful style of catamaran racing hull RC's and then you can open up the throttle and this beauty will sit really nice on the water. Nice work though Cheers Mate 👍👍👍😎💨🏴☠☮☮🌈💡🔧
Yine harika bir proje izledim. Emeğinize sağlık 💕
Güzel yorumunuz için teşekkürler.
@CraftChannelYT hello would it be possible to have the weight of the catamaran at the end of the print because I don't know which engine to put in it because I already have an ESC of 150 a
Onde posso tá comprando o arquivo 3d ?
@@CraftChannelYT hello I have just finished the complete printing of your boat there is a little problem with the cover the measurement they are not good at all can you also help Thank you I am waiting for your return
Muhteşem 🎉
Шикарно!
Viele Grüße an die türkischen Mädchen! :)
!! SUSCRIBED!!
Great Video!
Hahahha, 🤩
This is an excellent video in documentary form. Every time you raise the bar even higher, Excellent design and craftsmanship. congratulations to the whole team. 🍻cheers craft channel.🍻
Your nice comments and support always encourage me to do better projects. Cheers.🍻
Easy,
Just don’t crash it!
so satisfying LOL
awesome👍
Frauenpower .--- wow respekt
Best boat ever! Can i have your printing settings?
I sub your channel because of this beautiful craft you made it’s really amazing 🤩
Hell yea! 🔥🤟
RESPECT !!!!!!!!!!!
Perfect🎉
wow~~!!! art rc rc rc~~~!!!
Masterpice !
A great RC Boat build from 3d printed Body Parts. The main thing is it looks like factory built and also runs great. This was the promise of 3D printing machines.
Kullandığınız diğer 3d baskılı ürünleri de yayınlayabilir misiniz?
This looks fast as hell! Well done!
Лодка огнище ! единственное вопрос на сколько долго проживет кузов ? Если гонять на скоростях 100+ даже уголек\кевлар трескатся начинает со временем.
Not gonna lie, the pretty girls is what made me initially watch(even though I KNEW they didn't build or control it). Thats just not what pretty girls do. I am really glad I did though. I love all things RC, 3D printing, and of course...pretty girls.
Awesome job man! Thats some beautiful craftsmanship and one sweet boat!
Same here hate to admit it.....
Yeah that's the whole point einstein
@@mrb2917Must be a sad life, just living to make snarky comments towards others
That's an amazing work and project execution as always!
Just waiting to see in your channel my 3D printed RC car, it will be awesome to see such a perfect work with my project too 😄
Thanks for your nice comment. Hopefully we will do it soon.
@@CraftChannelYT oh that's really cool!! I can't wait!!
Nice build, wouldn't mind getting a mono hull printed not sure if it will hold up with my zenoah marine engines
Sağa sıkılır sola açılır😂
Похоже, что наименее затратная часть из всего здесь показанного - это "НИВА"))
Using models to showcase your models - I’m not complaining.
Its great...
Bir rc tutkunu olarak yaptığınız işe ve işçiliğe hayran kaldım! Tebriklr çok başarılı! Bir sorum olacak Ender 3 ve Ender 3 v2 kullanıyorum bu tekneyi onları kullanarak baskı alabiir miyim ? :)
what an incredible project I watched this video a least 10 times I want to do it also do you think I can do it with a 220x220x250 mm 3d printer. Thanks for your great projects
Do you have the STLs for the piece you sat your motors on?
Came out great! Love the color!