★ ALMOST FINISHED BIKE HITS THE CONCRETE!!! - Honda CB750
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2022
- My Honda CB750 Cafe Racer Unfortunately kissed the concrete one night when I was packing up.
WHERE I GET ALL MY SPARE PARTS ➨ www.cmsnl.com
MY BELT GRINDERS ➨ www.84engineering.com.au/shop...
MY TOOLS & MACHINERY ➨ www.machineryhouse.com.au/
FULL UPHOLSTERY VIDEO • ★How to Cover a Motorc...
CUSTOM SPRAY MODS CHANNEL ➨ / customspraymods
COATINGS AND VAPOUR BLASTING ➨ 74works.com.au/
SHOP - www.caferacergarageshop.com
Parts and tools I use: www.amazon.com/shop/caferacer...
#HondaCB750Build #CafeRacerBuild #CafeRacerGarage
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for TH-camrs
=====================================================
💥💥Want to see exclusive content, behind-the-scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts, and much more!
/ caferacergarage
=====================================================
For all commercial inquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
01. ★ MAKING a TILT TOP TIMBER Table With Some COOL FEATURES
• ★ MAKING a TILT TOP TI...
02. ★ BUILDING A PVC PIPE EXHAUST TEMPLET!!!
• ★ BUILDING A PVC PIPE ...
03. ★ WHY I DON'T WANT TO BUILD A YAMAHA XV750 CAFE RACER!!!
• ★ WHY I DON'T WANT TO ...
04. ★ How To WHEEL RESTORATION - TIMELAPSE / Cafe Racer
• ★ How To WHEEL RESTORA...
05. ★ Making a HANDMADE Alloy TAILLIGHT For a MOTORCYCLE
• Making a HANDMADE Allo...
06. ★ HOW TO MAKE TOE PEGS TO MATCH THE TANK!!!
• HOW TO MAKE TOE PEGS T...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe To Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challenge) SUBSCRIBE to follow my future builds, I'm based in Australia.
===================================================== - ยานยนต์และพาหนะ
![How to Build a Cafe Racer Custom Exhaust - Honda CB750 [Stainless] TIME LAPSE](http://i.ytimg.com/vi/95kBhog_gmk/mqdefault.jpg)
I always feel a little relief when I get those first scratches out of the way. I can finally stop worrying about it so much.
As a motorcycle mechanic, I was moving a customers beautiful 08 ish Gold Wing one day, there was a tiny bit of sand on the top of the concrete in the shops storage area. I was taking my time but as soon as I slipped on that sand, I knew I was going to lose that bike. I set her down ever so gently with all my strength and got so lucky to not even leave a scratch on the crash cage that saved me. Shit happens man. Glad it wasnt too bad.
CB400 build - can't wait to see how this turns out!
Thank you for letting me know mate
Sorry to hear the CB went down Dan, glad it only minimal damage mate. I think we have all done the same thing at some point . I built a GSXR1100 from boxes of parts just finished it and had not started the rebuilt motor left it sitting on a race stand, went in the house for a drink and heard a crash! I think the cat next door jumped from the fence, landed on my bike and down it went. But that's life. Ride safe mate. Cheers
Ouch ... absolutely gutting is the feeling Dan . Almost dropped me Bandit a few days after buying it I was on the wrong side as the side stand went up .. hung on for dear life as it would have gone down hard against a tool bench. Soo glad it's only minimal damage . Looking forwards to your friends videos when she gets some time , it great to see someone else doing the work with as much passion as you . Need to go look in the library for the kart videos not seen you work on one for ages . Cheers as always for a brekkie vid .
Glad the damage wasn't too serious. It's such a beautiful build and has definitely been some inspiration for my build.
Thank you so much mate and I’m glad that you are getting inspired by this
Oh man, I know what that feels like, Dan. I had my Ducati about 3 months and found myself in a ditch unable to steady myself at slow speed and down we went. Had to get new body work on the complete left side. Not cheap. Looking forward to ALL you have planned. I like polished aluminum/aluminium btw. 🏍👍🏍
I can imagine that would’ve been cheap at all, unfortunately it does happen to a lot of people you’ve just gotta pick it up and hope for the best. Thanks for sharing mate, Yeah I’ve definitely got a lot of work ahead of me lol
Oh that hurts still. About the bezzel for the speedo, the aluminium color just gives it a nice edge to the whole of the bike. Great work as always 👏👏👏
Sorry to hear about the CB750. Glad it wasn't too bad. Looking forward to the upcoming videos.
Someday I'd like to see your take on making side covers for the triangle. Not the most common cafe look, but they look sharp if done well.
Cheers!!
It’s really cool all u do. Keep it up!
So I am a subscriber I love watching your work stuff made me go by 1981 Honda cm400t and I'm turning it into a cafe racer also I've gotten so many ideas on how I'm doing my bike from things that you have done you do really great work such an inspiring person thanks
Those pebble driveways in the rain are like ice..bit of water and some slick shoes and it turns into a winter Olympics down hill run.The engine fin damage seems like the worst..but it's not the end of the world
Oh yes, i had that with my cx500. It just tipped over away from me so i couldn’t catch it. Same kind of slope. I was very angry but in the end only the bar end mirror was seriously damaged.
It's really good and great work.👍
Really glad to see that the CB has minimal damage. Yup, I've done it before. On my first bike, 1982 Kawasaki GPZ1100, Eddie Lawson replica. I was riding into my dad's garage and riding sideways on a slight incline that was barely wet. The front tire slipped and over it went, veerrrrrryyyyy sloowwww. Lol. Luckily it was on grass and no damage at all, besides my pride when my dad laughed at me. LOL - Nate
Oh that’s terrible but it does happen unfortunately and I think sometimes our egos and pride get more damage than the bike. Lol 😂
I like the machined 94 clean aluminum look on the gauge mount. Maybe try rubbing it down with some aluminum mag polish to spiff it up a little more and protect it from oxidizing.
That Virago starter is a pain. We got one in from a customer. Starter sounded like a can of rocks mixed with grinding. Lol. We flipped the gear (forgot what it's called) and now it works great. It's a quick fix just to get it started. It will most likely need replaced once we really get into the build.
Yeah I think that’s what the guy did before I bought it, that is definitely a quick fix and I have something a little bit more permanent planned :)
Hi Dan! I noticed you used a rear tire on the front of the bike as well. I was wondering what your experience is with that thus far. Did you reverse the tire's rolling direction to compensate for the braking force of a front tire application instead of the acceleration force of a rear tire application?
I'm looking forward to the CB 450 build with your friend.
Hi Dan, good to see you are nearly there. That was bad luck and I can imagine your mood after that. I droop the side stand on my F650 Funduro, nothing to do with you lovely 750, the stand was half way when I released the weight and that was it , no way I could stop it to go down. Not very happy , not because of the bike, because I have what I call my double ""chicken mesh"" from groin hernia opp lol , take it easy, Looking forward for those videos. Thanks, Gus
you poor guy, I totally understand where you’re coming from, When they go they go and you can’t really stop them falling. There’s always a lesson to be learnt though 👍
I really like the Honda's but I still want to see that Yamaha XV750 build getting done for a change.. And ofc the Series with your friend building her bike.
It happens mate, u almost finished a custom build on a xjr1300 and didn't have the side stand down fully whilst taking it off a poddock stand, in slow motion it rocked forward and fell onto my workbench. I too was amazed at how little damage and I luckily avoided a fresh painted tank.. Shit happens every now and again...
Whoa! that could have been a whole lot worse. Thank goodness it wasn't to bad. Looking forward to the new content!
Yeah you are 100% right and I’m super grateful that it’s only minimal damage
I actually like the raw look for the gauge housing 👍🏼
cmsnl is a great site BUT if you live in North America the shipping is impossibly insane. They REALLY need to open a warehouse in the US cause the sales would triple or more.
It's happened to us all mate lol glad it wasn't too bad :)
Looking forward to the future videos dude 🤙
Thank you so much James
Sad to see this happen to you after so much hard work, luckily the damage is not too bad but I hope you get everything sorted real soon.
Yes I was extremely grateful that the damage is minimal, I think I’m gonna take it for a a few rides before I fix everything otherwise it’s gonna be even longer before I get to ride it properly
Polish it! Looks fantastic!
This thumbnail is like looking at a dead body every time I scroll by it.
Luckyunlucky! Dont feel bad about yourself it's gravity😉
Had this two with two of my heavier bikes a '95 CB1000F and my current MT-01. Once the lean of the bikes became to much I had to let them go in slowmo. It happened on "big" gravel. There was some worse damage on both, your realy lucky with those few scratches👍 you'll get it fixed.
Thank you for making me feel a bit better, I definitely understand what you’re saying and feel your pain, I think I’m gonna take this bike out for a ride and then come back and fix those small things just so that I can get a chance to actually ride the bike Sooner rather than later
@@CafeRacerGarage Yeah do that! It's a motorbike after all. It's not ment for cleaning or putting it in a museum (even though your bikes would deserve it) my bikes are always protected by dirt at the end😋 that's why I love fake patina and the used look, additional scratches just add more style🤣 I'll imitate some of your styles but will add a slopy finish😉👍
Had my bike fall over in almost the exact same way. Took mine to a self-serve car wash, got my air filters too wet so it wouldn’t start, and I had to push it out of the wash bay. Foot slipped on the soapy ground. Was so upset and so embarrassed. Thankfully though didn’t do a lot of damage.
I dropped my new Triumph Trident 660 when taking it of the rear bike stand, broke the clutch handle and had really bad scuffs on the luckily engine and frame protectors. Two years ago dropped one of my Yamaha FZR 1000 Exup collection bikes and it fell against a moveable work scaffolding whereby the cowling and screen where scuffed. Did not want to repair it so I put a sticker over it of Vlaanderen (Flemish part of Belgium). So yes it will happen.
once i dropped my sohc cb750 at 3:30 am, leaving for work.... gas spilling everywhere, im juust barely strong enough to even pick it back up. it was a nightmare 😭
Think most of us drop the bike sooner or later... Sh** happens!
Cant wait to se te xv1000!
Greetings from Croatia!
Wazup Dan
I'm really excited about the virago ! do you know is gonna be on air this mouth ?
You probably answered this question but what gas tank did you put on your CB750? I have a CB550four and I was wondering if it would fit or would i have to custom fit it.
CB750F, definitely on the heavy side, not a bike to move alone on any slopes. Wear good grippy shoes, lean it more towards your body while handling.
Thank you mate 👍
Love it
You are a brave man Dan! I will follow your XV build to see how you will fix that ugly duck and make it into a swan. (Yes yes, I'm from Denmark!)
Many have tried, few have succeded. A rare bike for you to have in mind (don't know if they even exists in Australia) is a danish bike called Nimbus. 750cc straight 4 with shaft drive. Yes, the engine is from front to back. They stopped making them in the 50ies.
Good luck!
Thank you so much mate I’ll definitely keep my eye out for this bike but I don’t know my chances are gonna be very high in finding one and if I do the price would be crazy
@@CafeRacerGarage Yes, you're probably right. A Nimbus in good nick is around 10k aussie Dollars...here in DK! But still new parts available!
I have watched your videos and they are great, they are very informative. My only problem is I have watched every one of them now and sometimes some of them twice. Could you suggest another builder here I could also view. That is besides combustion junction because I have watched all his videos also. Thanks a bunch. Robert
Try jish and also classic octane, those guys are awesome. Feel free to tell them I sent you if you want
What gauge are you using ? Thanks
so sad about it! but you'll fix it!
Sorry that the bike fell over , it really sucks , been there fairly recently myself , but it is just going to make ourselves that much more careful to the point where we will never let this happen again , if at all possible, I was in a bad fender bender over 20 years ago and remembered how I swore that I would be way more careful with motorcycles , after I hit a water meter and it made the end of the handle bar punch 🥊 me so hard just below the ribs and I damn near passed out ,but the little tear right around the ribs that was starting to bleed out and me sitting there for 10 min. In a daze like I just got punched by mike Tyson in his prime bare handed 🤜 i thought I was going to die , anyway damage is minimal and possibly took the least amount of damage it could of taking , you will take care of these issues one by one ☝️ first , would love content on how you resolved it , take care and thx 🙏 for sharing
Where are you have an incredible story to tell after all that, things could’ve been terribly worse so you’ve gotta be grateful that they weren’t and you get to tell the story over and over:)
My bike is okay and I’m just going to work through things and get them fixed, I will probably ride the bike first and then eventually get all these little small things sorted between working on another bike
Do you have the other engine 750 to sale?
Bon courage
Jaouad de France.
is it a nighthawk cb750?
Wasn’t bad.. still 🔥
Pebble crete is shirt !!! Sort of lubricated when wet.
bro \sir i have been watching your channel very long in fact i am your big fan from india wour work is super amazing...... sir try something new type mods... i just love your work....
Thank you so much mate
carpet or rubber matts would have saved it as well, put padding under the carpet, better to work on as well.. stop nuts from rolling sooner off too ... lol
Yamaha Virago 750cc !!
Thank you for letting me know brother
its not to much what you hit your very beautiful bike 1 time for 4 years))