I have issues whit sensors and stuff ! And I believe I had poor injectors but was not the fact as we test them. It was my ECU that had got messed up some how 🤔 I did run 12miles /gallon. Now as it runs fine I'm have 28 mile/gallon. All common rail sucks ! I love the old pump system. Sure it's more effective this way. But still I'm old school. My truck has 220000km and I'm in general very happy! Its lifted 4" and BF Goodrich T/A tires. It was back the days black smoke a bit now its mostly gone. Thanks for show how fix the problem who comes up. I should take my truck and drive over to UK. I live in Sweden 🇸🇪 Best regards Bjorn
Just watched your injector removal video, I have a xj Cherokee 2.5 TD and I need to test the resistance on injector no. 1 I'm a complete novice and have spent 2k with a garage and did font the cause😬 I since reaserched that the no. 1 injector is the likely cause, my symptoms are the turbo stops boosting at 2000 RPM in every gear in all conditions , I'm so desperate for help as we really love this jeep , I wish we were close so I could simply bring it to you!!! But Devon is a bit of a trek !! Anyway, I hope you can help and keep doing great videos Kind regards Chris.
Great video. At the end, you mentioned that if the car has bad fuel mileage, changing the fuel Injectors can fix it. I've just bought a 2009 D22 yd25 Navara and I think it's running too rich compared to what I've heard other people do. Along the highway it drinks fuel too fast. For one standard 75L tank, I'm doing barely 460km. Not sure if that's expected from a car of this age. There's no mis fire or any power loss for as far as I can feel. I've done the easiest fix - the air filter with no conclusion. Could new fuel injectors improve my fuel economy? I live in outback Australia so our highways are pretty consistent here. Strangely it seems to be more fuel efficient on dirt roads than on the bitumen. Not sure if that's a clue also. Thanks for your help
Prob best video I've seen so wished I'd brought my truck to you guys Had new injectors fitted now got management light on saying glow plug relay circuit fault. Never had a light on before they did injectors and they just turned light off and knowing it would come back on when I got home to me it's obvious that the two are linked and not coincidence like they suggesting Any help much appreciated Steve
If you’re injectors are faulty this can then burn a heater plug out Its a simple job it’s only £45 for a set of new ones Also you will need 8mil and 12mil deep socket to replace All the very best Des Ps thanks for the compliment 😊
Great video. I used to do all my own mechanicing and didn't wear gloves. Now I have very sensitive and damaged skin on my hands. Just a heads up Des. I know they are a pain but in years to come... who knows. My Pathfinder might need help one day and your shop will be the first call I make.
Many thanks for your video, I am thinking to do my inyectores on my pathfinder from 2008, I will send them to check and repair if they need, the car is got 160000 km o 100000 miles and I think is not going very well,
Just swapping out my injectors now 07 d40 yd25. Your vid helped plenty. Fuel return rail has to come out to get at the injector clamp bolts, apart from that pretty much same same. Torque settings?
Hi,nice watching your videos, very helpful.I was trying to remove the injectors by mistake,I losen all the bolts on the cam and crank shaft bracket.need help on this issue,how or what do I do ?do I have to torque the bolts and set the time Chain?thank you and would much appericate your help.
Hi we have a x trail which has excess crankcase pressure it chuffs when oil filler cap is removed im suspecting injector seals as it also has a misfire on tickover what do you think cheers
Have you got a list of the new seals and washers that I need to order to do this job. Including anything that might be split like those aluminium washers
Are faulty injectors a terminal issue if not fixed straight away? As in can they cause serious engine damage? I believe mine need done but am unable to get to mechanic as my country is in lockdown
Hi Iv got a 2010 crossover with the later engine , and im having a nightmare starting it ,always starts but turns over for ever and plumes out smoke when it starts ,worse when cold (this has been going on for 18 months ) Iv had at diesel specialist,had new filter ,new starter ,four new injectors but it's still the same ,would you have any idea what to look for , it's starting to cost me a fortune, had the truck from new and it has 57000 on clock , thankyou in advance
Hey guys just removing mine at the moment due to excessive oil leak coming from the rear injector on engine. I have the rocker off and can see the injector is covered in oil. I was going to take it out to check the condition of the rings on it but it seems jammed. Any tips for loosening it?
@@westyorkshireengineservice9160 Got it out and as I suspected the seal has corroded. Do you guys know anywhere good to send for testing or refurbishing?
Holy fuck. Then toss the un marked (from which cylinder) injectors carelessly across the cams. No clean rags poked into holes of head to catch stray debris.
Mate can you do a vid on how you actually code new injectors to the ECU, also should the old injectors removed be replaced in the same hole ?? Cheers from Tasmania.
Can I install the new fuel injector and drive without it been coded and get the mechanic to code it to ecu? From a apprentice builder to know apprentice mechanic 😅
Hi can someone help me please. I have pathfinder 2.5 auto 2007 . From cold it idles rough and cuts out at junction when cold replaces maf/ blocked egr/ changed suction control valve / changed fuel filter / had new head and turbo still idles rough from cold ok when warm????? H e l p ..
Its not her. Shes using the wrong spanners. Nobody in the comments has mentioned it. She should of been using flare nut/ line spanners. And thats why you use them as you saw.
Pretty glad to see a mechanical video where the person holding the wrench is authentic enough to swear under their breath. Good tips, thanks!
Your videos are well done and easy to follow. Suzanne knows her stuff.
I have issues whit sensors and stuff ! And I believe I had poor injectors but was not the fact as we test them. It was my ECU that had got messed up some how 🤔 I did run 12miles /gallon. Now as it runs fine I'm have 28 mile/gallon. All common rail sucks !
I love the old pump system. Sure it's more effective this way. But still I'm old school.
My truck has 220000km and I'm in general very happy! Its lifted 4" and BF Goodrich T/A tires.
It was back the days black smoke a bit now its mostly gone. Thanks for show how fix the problem who comes up.
I should take my truck and drive over to UK.
I live in Sweden 🇸🇪
Best regards Bjorn
Thanks for all your help Suzanne and Dez,from the guy who rang you a couple of times today
Your a great help, mate, i just finished putting my cams into the cylinder head on a nissan pathfinder r51.
Just watched your injector removal video, I have a xj Cherokee 2.5 TD and I need to test the resistance on injector no. 1 I'm a complete novice and have spent 2k with a garage and did font the cause😬 I since reaserched that the no. 1 injector is the likely cause, my symptoms are the turbo stops boosting at 2000 RPM in every gear in all conditions , I'm so desperate for help as we really love this jeep , I wish we were close so I could simply bring it to you!!! But Devon is a bit of a trek !!
Anyway, I hope you can help and keep doing great videos
Kind regards
Chris.
Hey @chrispascoewhite , Did you resolve your turbo boosting problem ? Did you find a good diesel mechanic in Devon ? I have similar problems. Thx
Great video. At the end, you mentioned that if the car has bad fuel mileage, changing the fuel Injectors can fix it. I've just bought a 2009 D22 yd25 Navara and I think it's running too rich compared to what I've heard other people do. Along the highway it drinks fuel too fast. For one standard 75L tank, I'm doing barely 460km. Not sure if that's expected from a car of this age. There's no mis fire or any power loss for as far as I can feel. I've done the easiest fix - the air filter with no conclusion. Could new fuel injectors improve my fuel economy? I live in outback Australia so our highways are pretty consistent here. Strangely it seems to be more fuel efficient on dirt roads than on the bitumen. Not sure if that's a clue also.
Thanks for your help
Prob best video I've seen so wished I'd brought my truck to you guys
Had new injectors fitted now got management light on saying glow plug relay circuit fault. Never had a light on before they did injectors and they just turned light off and knowing it would come back on when I got home to me it's obvious that the two are linked and not coincidence like they suggesting
Any help much appreciated
Steve
If you’re injectors are faulty this can then burn a heater plug out
Its a simple job it’s only £45 for a set of new ones Also you will need 8mil and 12mil deep socket to replace
All the very best Des
Ps thanks for the compliment 😊
Great video. I used to do all my own mechanicing and didn't wear gloves. Now I have very sensitive and damaged skin on my hands. Just a heads up Des. I know they are a pain but in years to come... who knows.
My Pathfinder might need help one day and your shop will be the first call I make.
I wish my Vito injectors had come out that easily! Des great video, would you recommend recutting the injector seats, or are they normally ok?
You've put me off ever buying a Navara des lol
How do you remove a severally siezed/stuck injectors? I had too remove the head. Any ideas?
Many thanks for your video, I am thinking to do my inyectores on my pathfinder from 2008, I will send them to check and repair if they need, the car is got 160000 km o 100000 miles and I think is not going very well,
Hi Des, do they always come off so easy on a Navara?
Just swapping out my injectors now 07 d40 yd25. Your vid helped plenty. Fuel return rail has to come out to get at the injector clamp bolts, apart from that pretty much same same.
Torque settings?
Hi,nice watching your videos, very helpful.I was trying to remove the injectors by mistake,I losen all the bolts on the cam and crank shaft bracket.need help on this issue,how or what do I do ?do I have to torque the bolts and set the time Chain?thank you and would much appericate your help.
Great Video guys👍👍. I have oil leaking from the top of the front injector.
What the recommenced fix advise.
Cheers
So interesting. I have a Nissan Navara YD25 D40 with a slight rattle noise.
Hi we have a x trail which has excess crankcase pressure it chuffs when oil filler cap is removed im suspecting injector seals as it also has a misfire on tickover what do you think cheers
I agree but remove dipstick and see if it does it there At least you will be able to see if it’s top end or bottom
All the very best Des
Why are you not in that nice clean workshop from a couple of years ago?
Please what's the name of part at the top of the engine. Oil leaks from them in my Nissan NP300 hardbody pickup
Have you got a list of the new seals and washers that I need to order to do this job.
Including anything that might be split like those aluminium washers
Anstiss Limited normally it comes in the kit buddy everything you need good luck with your build All the best Des
Do you do a vid on removing an injection on 2.5 dmax
Have yah done any vids on d22 2001 navara injectors ty
Are faulty injectors a terminal issue if not fixed straight away? As in can they cause serious engine damage? I believe mine need done but am unable to get to mechanic as my country is in lockdown
Do you have a video of injector removal 5.0 Nissan Cummins diesel engine
Yes subscribe 230 videos all free
Hey guys quick question, if I send out injectors for cleaning would that get rid of the rattle in them or not cheers
Hello, love your videos. Can I have the torque specs for returning the fuel return line bolts?
Edward James 14nm buddy
Hi Iv got a 2010 crossover with the later engine , and im having a nightmare starting it ,always starts but turns over for ever and plumes out smoke when it starts ,worse when cold (this has been going on for 18 months ) Iv had at diesel specialist,had new filter ,new starter ,four new injectors but it's still the same ,would you have any idea what to look for , it's starting to cost me a fortune, had the truck from new and it has 57000 on clock , thankyou in advance
Heater plugs have been tested and OK
Hi buddy have you seen the video on how to diagnose engine faults we have done thanks Des
Great vid great advice and yes I’ve subscribed
By the way thanx for the great vids. You guys are champs.
Hey guys just removing mine at the moment due to excessive oil leak coming from the rear injector on engine. I have the rocker off and can see the injector is covered in oil. I was going to take it out to check the condition of the rings on it but it seems jammed. Any tips for loosening it?
That's not that easy, the injector will be faulty also, good luck with it!
@@westyorkshireengineservice9160 Got it out and as I suspected the seal has corroded. Do you guys know anywhere good to send for testing or refurbishing?
Had a problem with injectors for pathfinder disel
How to release the rail pressure?
Out of interest what causes the knock. The valves I assume
Love watching your videos!!! Great work.
Would this be the same procedure for 2010 d22 yd25 cheers
Hey mate. Did you find the answer about the D22? I need to do my 2009 D22 yd25
Can you do one on a 1992 Ford f-250 7.3
Thanks for the update
coding the injectors is not for MPG , ITS for smooth running , so all the injectors run the same
Now show us how you do a PSA, kandy or volvo etc that was a doddle , ford and landrover injector removal. That my friends, is a challenge.
If I replace whole engine on this model do I need to use a scan tool to introduce to ecu new codes
My Nissan caravan has temp gauge and fuel gauge issue they respond to ignition but wont give a proper reading please help.....
So the technique for removing injectors is using a flat blade screwdriver and prying them out using the cam lobes as leverage 🤔
H o l y f u c k🙈
Holy fuck🙈.....and then throw them down on the cams no rags tucked in around the galleries to catch stray bits n pieces.
Holy fuck. Then toss the un marked (from which cylinder) injectors carelessly across the cams. No clean rags poked into holes of head to catch stray debris.
Exactly
stage3muppet exactly
What is the kind of the engine , I have 2,5 DDTI 286 000km. And I want to change cylinder head gasket.
That was painful to watch & glad it was not my vehicle.
Why?
Can't even use spanners
/ sockets properly
Mate can you do a vid on how you actually code new injectors to the ECU, also should the old injectors removed be replaced in the same hole ?? Cheers from Tasmania.
Rob sandars Hi buddy we have done a video on how to code injectors all the best Des
Awesome😅
Good tips thanks!
Can I install the new fuel injector and drive without it been coded and get the mechanic to code it to ecu? From a apprentice builder to know apprentice mechanic 😅
How do you code new injectors with the ECU if need be?
What is the oil injector pressure for nissan navara d40?
Thanhk ❤
Good job! But I'd like a vid on suck injectors I would like to see how u get those out if there is a special tool and so on.
My d40 navara not idling please advise
What about for petrol engine
What torque set can you advise ?
14nm
Fair play love the content well explained an well helpfull
Front bumper restailing 2010?
You didn't show us how you removed the woman from your engine bay!
Rich X engine lift buddy
good
Have you got an email to send help questions to?
Rich westyorkshireengines@gmail.com
Hi can someone help me please. I have pathfinder 2.5 auto 2007 . From cold it idles rough and cuts out at junction when cold replaces maf/ blocked egr/ changed suction control valve / changed fuel filter / had new head and turbo still idles rough from cold ok when warm????? H e l p ..
unplug cam sensor see if she still cuts ot
West yorkshire engine services what if it cuts out after cam sensor unplug?
What if it cuts out when I unplug cam sensor?
West yorkshire engine services what should happen? If I unplug cam sensor? What does it mean ??
Why ar they under the rocker cover. Thats feckin awarked!
Nice . If only they all came out that easy.
Just removed a 2.0 ecoblue transit one. Horrendous. Ford write the engines if they won't shift
Love ur Videos but the sound is a too low🙈
Thanks for the insight
Must be allot of work with specialising in Nissan's
😎INCLUDING SHIPPING TO & BACK😎.
Yeah very cringey.
Pry on the cam all you want just not with a screwdriver that's hardened and not on the Cam lobe.
hard to hear you
Suzanne looks like an absolute newbie on the spanners!!!
Its not her. Shes using the wrong spanners. Nobody in the comments has mentioned it. She should of been using flare nut/ line spanners. And thats why you use them as you saw.
poor camshafts...
Hi Des.. please hook me up with an EGR Cooler..
what a massive ball ache