Bearings for the mini lathes compound slide

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ส.ค. 2024
  • Part 2 - new brass nut: • Brass nut for the comp...
    Even with absolute loose gibs on the mini lathes compound slide, it was almost impossible to turn the handle properly as you can see on the beginnig of the video. It was so sticky due to its crappy mounting without any kind of bearing. Since this is a common problem on various mini lathes, I decided to share my solution with you.
    My wish for a better and usable compound rest brought me to design a new aluminum bearing block which replaces the old one which did not deserve that word. Now there are two axial needle-bearings and one radial bearing installed in the new bearing block which is designed to look a bit more like on a "real" lathe ensuring a really smooth motion now.
    Keep in mind, due to very limited resources, I have to improvise a lot and go unconvenient ways which may upset some of the "real machinists" out here.
    Hope - with some creativity - in the end come to good resoults anyway.
    Thanks for watching and feel free to subscribe for more mini lathe, machining and hobby engineering content.
    If you have questions or any suggestions, let me know in the comments.
    Please bear in mind, that english is not my first language. Hope, you get it anyway.
    Instagram: / wecandothatbetter

ความคิดเห็น • 151

  • @tedwaetford
    @tedwaetford 2 ปีที่แล้ว +46

    I've watched a million youtubes on mini lathe upgrades, and get annoyed/depressed when they always use a mill, which I don't have. You make this stuff with just the lathe and drill-press, which is all most people have when they first get a lathe. This is much more relatable to me. Well done.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  ปีที่แล้ว +4

      Thank you very much for your kind comment!

    • @TheBipolarBear
      @TheBipolarBear 10 หลายเดือนก่อน +1

      I read your comment after letting out a deep sigh of "dang, I don't even own a metal file or hacksaw, let alone a drill press". It makes me wonder if ever getting into hobby machining will remain a fever dream for me. 😐

    • @djagrarms7916
      @djagrarms7916 6 หลายเดือนก่อน +2

      @@TheBipolarBearyou’ll get there, keep you head up and keep chipping away at your dream. I started with cheap hand tools then used those tools to make better tools or fix tools up I brought at garage sales. Accumulation of anything including skills and knowledge is a process of which takes time. I believe in you! Now go and get it!👍🏼

  • @woutmoerman711
    @woutmoerman711 3 ปีที่แล้ว +11

    Great video and design. I love the absence of music, just the machining sounds. Which is very illustrative too because the sounds tell a lot of how a machine is functioning.
    Lovely filed facets on the extension block!

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +1

      Thank you for your kind comment! Happy to hear, you like it :)

    • @johnwhitty1236
      @johnwhitty1236 2 ปีที่แล้ว

      Nice job.. but the noise from the bench drill needs Fixing too

  • @lrita7179
    @lrita7179 3 ปีที่แล้ว +7

    Enjoy watching your videos - please keep making them. One of the things I like about them is making everything on the mini-lathe.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Thank you very much! Happy to hear, you like it! :)

  • @BSpinoza210
    @BSpinoza210 3 ปีที่แล้ว +7

    It's criminal you don't have more subscribers, this content is awesome.

  • @robertwright2668
    @robertwright2668 3 ปีที่แล้ว +8

    Don't worry about "real machinists" if it works, it works. Thanks for sharing.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +1

      :D thank you Sir! That's what I think too :)

  • @johnstonewall917
    @johnstonewall917 3 ปีที่แล้ว +3

    When I bought me mini lathe the first thing I realised had to go were the solid handles on the cross slides and replace them with longer ones with rotating sleeves, the simplest of jobs which require no description. So I am slightly bemused when every time I see a video about mini lathes and their modifications, there are the original handles! An challenge for every mini lathe owner.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Thanks for your comment. Yes you can change this easily and perhaps some day I'll do that too. But at the moment there are other things which bother me more on this lathe than the handles. For fine adjusting I actually find the fixed handles even more convenient than the more slippery turning ones.

    • @johnstonewall917
      @johnstonewall917 3 ปีที่แล้ว +1

      @@WeCanDoThatBetter OK. Best of luck with the other mods.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      @@johnstonewall917 Thank you ;)

  • @williamcullum8379
    @williamcullum8379 3 ปีที่แล้ว +3

    I really enjoy your videos on the mini lathe. Please keep them coming.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Thank you very much! I really do appreciate it.

  • @hewlett-packardlovecraft2297
    @hewlett-packardlovecraft2297 ปีที่แล้ว +4

    Hi there- just found your channel, and decided after one video to subscribe, and start from the beginning. Love to have a new back catalog of videos to go through- plus, I love the fact that it seems like you have just about the same stuff to work with, tool-wise, that I do. Keep these fantastic videos coming, and have a great week.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  ปีที่แล้ว +1

      Thank you so much for your kind comment and feedback and for having subscribed to my channel! Happy to hear, you like my work. All the best!

  • @lesmaybury793
    @lesmaybury793 2 ปีที่แล้ว +4

    I did a similar mod to my compound a while ago. Including the thrust bearing is a must on these little lathes.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว +1

      Yes, it improves the compound a lot. Before the handle on mine hardly moved when trying to turn

  • @touringmoose
    @touringmoose 2 ปีที่แล้ว +4

    I did a similar mod to mine about two years ago with the two thrust bearings. However I found a large part of the play was the compound leadscrew. You can see it 8:31. They're a very poor fit so I made a whole new leadscrew with a woodruff key to lock the dial to the leadscrew.

  • @JaredBrewerAerospace
    @JaredBrewerAerospace ปีที่แล้ว +2

    I have done the same mod but I used round socket head for the capping bolt. So much better for your knuckles!

  • @gw2827
    @gw2827 3 ปีที่แล้ว +5

    Also you need to take a thin piece of cotton cloth and make a large ring just to keep chips out of the roller bearing .
    And with the cloth it will wick the oil to keep bearings lubed 👍👍

  • @federiconavarrocabezas257
    @federiconavarrocabezas257 3 ปีที่แล้ว +1

    Great idea and an excellent job, to improve my mini-lathe, which is one of my many hobbies, thanks.

  • @ussweeneyd
    @ussweeneyd 2 ปีที่แล้ว +1

    Turned out looking pretty good, in the end.

  • @kathleenfoster9887
    @kathleenfoster9887 2 หลายเดือนก่อน

    Nice work both practical and great looking

  • @BSpinoza210
    @BSpinoza210 3 ปีที่แล้ว +10

    Actually, your work is like a cross of Green Beetle and This Old Tony with a bit of Clickspring in the mix as well.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Haha, thanks my friend!

    • @tonycstech
      @tonycstech 3 ปีที่แล้ว

      Except he don't explain anything.
      It's like watching a movie without sound.
      You get to make up your own story.

    • @tcarney57
      @tcarney57 2 ปีที่แล้ว

      @@tonycstech The sound comes from the machinery. I think what he's doing is self-explanatory when it's shown as clearly and as close-up as he does.

  • @ARIFINLATHE
    @ARIFINLATHE 3 ปีที่แล้ว +1

    Ihre Idee ist sehr gut Sir

  • @CRILIKk
    @CRILIKk 3 ปีที่แล้ว +2

    Awesome work , looks really good, thanks for sharing

  • @practicemakesbetter7132
    @practicemakesbetter7132 3 ปีที่แล้ว +3

    Great video, you did an awesome job with simple tools!

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Thanks a lot! Really appreciate that :) I try my best with limited equipment :)

  • @davidt8438
    @davidt8438 2 หลายเดือนก่อน +1

    I don’t want to spoil the party but you should use plenty of lube when tapping. It makes it easier, prevents breaking a tap and helps keep the tap sharp. Half the videos I see no lubricant being used while the truth is , you can’t use too much.

  • @neiribeiroclpta
    @neiribeiroclpta 3 ปีที่แล้ว +1

    Hi friend. Your videos are excellent! Thank you for sharing. Regards from Brazil!

  • @geoff5269
    @geoff5269 2 ปีที่แล้ว +1

    I did this to my Warco wm180 and if you leave the Aluminium a rectangle there might be room to add a depth stop.

  • @Rcmetal
    @Rcmetal 2 ปีที่แล้ว +1

    Excellent work

  • @minimechanic3611
    @minimechanic3611 2 ปีที่แล้ว

    Your drillbit is dancing well 😂😂

  • @billofalltrades2633
    @billofalltrades2633 2 ปีที่แล้ว +1

    Well done

  • @reparandodetodo3768
    @reparandodetodo3768 9 หลายเดือนก่อน

    I love this video
    Is exactly what i was looking for

  • @SwissplWatches
    @SwissplWatches 3 ปีที่แล้ว +1

    Awesome awesome awesome! Thank you

  • @konturgestalter
    @konturgestalter 4 หลายเดือนก่อน

    Excellent content, are there plans for the upgrades you built?

  • @jefflaurence4924
    @jefflaurence4924 2 ปีที่แล้ว

    Stainless button head Allen screw for the handle. Cheers!!

  • @SohailKhan-or5zk
    @SohailKhan-or5zk ปีที่แล้ว +1

    Hey mate which lathe mc u r using?

  • @davidwhitlam8905
    @davidwhitlam8905 3 ปีที่แล้ว +2

    very nice job but i would have put a nice chrome dome stud instead of a cap bolt

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Thanks for your comment! That's a very good point. It's really annoying to bump your knuckles on the sticking out bolt. I changed it already in the meantime to a dome stud as you said. You can see it in the later videos. On the cross slide I haven't changed it yet but planning to do. That's a very good idea, thanks

  • @bobweiram6321
    @bobweiram6321 3 ปีที่แล้ว +2

    Excellent content here. New subscriber!

  • @kylebennett3073
    @kylebennett3073 7 หลายเดือนก่อน

    What brand or type of inserts do you use? What shank size is the tool as well

  • @theaholio7037
    @theaholio7037 3 ปีที่แล้ว +4

    "Real Machinists" will do what anyone should" Don't really care about the measurements, just use the video as a foundation to build their own work upon. (and hopefully will credit the creator when/if they post what they make online)

  • @JoseSilveira-newhandleforYT
    @JoseSilveira-newhandleforYT 3 ปีที่แล้ว +3

    Nice Job! That is a good solution! You still have to sort out the slop on the compound slide dovetails - Are you going to tackle that in a future video?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Thank you very much! You mean taking out the slop by scraping the compound in? I consider this for a future episode, yes. But have still a few things missing which are necessary for scraping :)

    • @JoseSilveira-newhandleforYT
      @JoseSilveira-newhandleforYT 3 ปีที่แล้ว

      @@WeCanDoThatBetter Yep. That and checking the gib - there are always problems with the factory compound gib.

  • @sugamedic188
    @sugamedic188 3 ปีที่แล้ว +5

    I need this. That slide is janky.

  • @tonycstech
    @tonycstech 3 ปีที่แล้ว

    Thanks.
    You have me an idea about something else.

  • @justaguy4788
    @justaguy4788 3 ปีที่แล้ว +1

    If you sold these as a kit for cross and compound, I'd buy one

    • @atticman2011
      @atticman2011 2 ปีที่แล้ว

      id take one also, Great Video.

  • @bhoiiii
    @bhoiiii 2 ปีที่แล้ว +1

    I just found your channel and really enjoy the projects and the way you present/make/edit. Do you think that this modification would shorten the travel of the compound?it seems like it may shorten it by the depth of the block behind the wheel?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว +1

      Thanks for your comment! This modification didn't shorten the travel of the coumpound slide as the aluminium block I made is exactly as wide as the round bearing block which came from factory.

    • @bhoiiii
      @bhoiiii 2 ปีที่แล้ว

      @@WeCanDoThatBetter that makes sense. Many thanks for the reply.

  • @andydemarco6058
    @andydemarco6058 8 หลายเดือนก่อน

    I realize this is an old video but do you have a material and part list for the conversion?

  • @stavrious
    @stavrious 3 ปีที่แล้ว +1

    great vids buddy

  • @Crypto666
    @Crypto666 ปีที่แล้ว

    You can rough cut aluminum using carbide wood blades and a power saw, no need for hand sawing.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  ปีที่แล้ว +1

      At this time, I had no powersaw, so handsawing was the only way...

  • @resotek
    @resotek 2 ปีที่แล้ว

    Hey, what pen is that you're using to layout on the aluminum at the beginning? I like it.

  • @CNC_MRC
    @CNC_MRC 3 ปีที่แล้ว +2

    Super.

  • @antoniovalenzuela1309
    @antoniovalenzuela1309 2 ปีที่แล้ว

    Por favor en donde puedo conseguir que cojinetes se usan y las medidas de la pieza de aluminio lindo video gracias

  • @MirekDvorak
    @MirekDvorak ปีที่แล้ว

    What kind of lathe is it, type, size? I'm also waiting for an upgrade...

  • @iranalencar5925
    @iranalencar5925 2 ปีที่แล้ว

    Vídeo top Aqui do Brasil 🇧🇷

  • @lefrancoisjeanpierre3098
    @lefrancoisjeanpierre3098 2 ปีที่แล้ว

    Joli travail je suis fan

  • @machinistmikethetinkerer4827
    @machinistmikethetinkerer4827 2 ปีที่แล้ว

    Well done. Now if I could just find a compound slide to fit my Unimat DB/SL...

    • @johnb2044
      @johnb2044 ปีที่แล้ว

      think that would take it up past its centre line i'll look at mine tomorrow or you may have to have a z bracket made up ?

  • @philoso377
    @philoso377 3 ปีที่แล้ว +1

    Nice idea and workmanship.
    Subscribed.
    Answer to page 6.14 do you know what an edge finder and center drill are? Look it up if you are interested.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Thank you very much! :) Yeah, that was no good idea for drilling. That's why I had to redo the part and ordered a proper center punch an scribing needle to mark the correct positions before drilling the new parts (in part 2 video, I show and used them already). Center drill is a good idea!

  • @ngauge22
    @ngauge22 ปีที่แล้ว

    Being I have the same size lathe, and issue, could you share the parts list of bearing and where you got them to save me time in researching. I've been looking for something like this and yours is the most practical.

  • @SuperGleep
    @SuperGleep ปีที่แล้ว

    Is there a reason you use LH boring bars and run the lathe in reverse? I'm curious if it's simply what you had so that's what you use, or if there was a deliberate choice to do so. Just trying to understand as I start trying to tool up my own mini lathe. Thanks!

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  ปีที่แล้ว

      Hi, it was simply what I had :) Sometimes it is useful to have a left hand boring bar, as you can see a little bit better what's going on, but here it wasn't necessary.

  • @WayneCook306
    @WayneCook306 2 ปีที่แล้ว

    Hi There, What size are the trust bearings, please??

  • @marcelocarnicelli6200
    @marcelocarnicelli6200 2 ปีที่แล้ว +1

    WOW ! I send 1500 like, from Brazil

  • @stevewhite315
    @stevewhite315 3 ปีที่แล้ว +1

    Why 2 needle roller bearings?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +1

      Hi to absorb the forces in both directions. When screwing in and screwing out the support. One axial needle bearing can only hold forces in one direction, therefore I need two of them. Hope that helps :)

  • @ThantiK
    @ThantiK 3 ปีที่แล้ว

    Woah woah woah... how'd you fill the old holes? I must know!

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +2

      Hey, you mean in the upper casting of the compound slide (at 9:44)? The old crooked holes were for M5 screws. I drilled them to 5mm and tapped them with an M6 tap. Now I put some two component adhesive in the holes and screwed a piece of brass round stock with M6 thread onto it into each hole. I left them a bit longer to grip them with pliers to screw them firmly in. In the end I cut the excess end off, cleaned the surface on the lathe and bored two new holes in the right position but now I went for M4 threads as they were smaller and fit better to the overall design. Hope that helped:)

  • @timothyosborne8285
    @timothyosborne8285 3 ปีที่แล้ว

    Have you tried adjusting tightening the Compound gib? It seems to be very loose at the start of the video. I'm enjoying you content so far.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +4

      Hi thanks for your comment :) That's for illustration purposes that the compound is so loose in the beginning of the video. Even with absolutely loose gibs the compound gets stuck because of the way the spindle is mounted. With the bearings installed the compound it's much much better and even with tight gibs the compound can be moved easily.

  • @whereswaldo5740
    @whereswaldo5740 3 ปีที่แล้ว

    It seems really nice. My lathe is not nice. His seems nicer. Unless he used a nicer lathe to make one like mine the little red Harbor Freight one nicer. Looked like he had a power cross feed. That would be nice. And a Four jaw Chuck. That would be nice too. I think the four jaw from Micro lathe or some such place.

  • @uwehehn3371
    @uwehehn3371 3 ปีที่แล้ว

    What bearings did you use?

  • @hazzard2012
    @hazzard2012 3 ปีที่แล้ว

    awesome!, please, can you tell us the bearings you are using in this video?, i'm trying to make the same improvements you was done on these chinese lathe.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Hi, thank you. I have to look it up which bearing I used.

  • @celtic1522
    @celtic1522 2 ปีที่แล้ว

    Please do not take this as a negative comment, but it makes me wonder why people buy those things(mini lathes) at all! better made smallish lathes are produced and are quite accurate and not too expensive either. It would frustrate the hell out of me if I bought a new product only to find I had to modify it to use it for the task it was designed to do...i got better things to do with my time...

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว +1

      Thanks for your comment! You are totally right. Through youtube I made modifying this lathe to its main task. If I had to do serious work on a lathe, I would probably go with another machine as you said, the time it takes to make it work is too much.

  • @ericbrackenbury
    @ericbrackenbury 3 ปีที่แล้ว +2

    It would be good if you gave the sizes and type of bearings you used, please and thank you :-)

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +2

      I have to look it up. I consider to offer plans in some way.

  • @taranson3057
    @taranson3057 3 ปีที่แล้ว

    I want to do this upgrade to my mini lathe. Did you draft up any plans with the dimensions?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Not yet, but I consider to.

    • @pauls5745
      @pauls5745 3 ปีที่แล้ว

      my buddy's and my Grizzly G8688's are .15 different across :o another worthy upgrade is replacing the compound with a solid block if you don't turn tapers often

    • @taranson3057
      @taranson3057 3 ปีที่แล้ว

      @@pauls5745 I plan on making a plinth just waiting on materials to arrive.

  • @Pushyhog
    @Pushyhog 3 ปีที่แล้ว

    is your cross slide nut stock?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      You mean the brass nut on the compound slide? It's not a stock part. I made it on the lathe and made a video on it. You find the link in the discription of this video. Answered this your question?

  • @skipgoryews1356
    @skipgoryews1356 2 ปีที่แล้ว +1

    I am sorry ! I did not intend to slam you . I just want .you to be safe . That unsecured part you were drilling scared me ! That s all. The content was very good ! Your other vids are spot on . Please forgive me . Skip

  • @rexaitken
    @rexaitken 3 ปีที่แล้ว

    When you have a noga indicator holder but have to use a nail as a centrepunch and scriber
    Edit: you have a quntumike, but no centre punch??

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +1

      Watch the other videos, especially my second video where I referring exactly to this. This was my first video with not many tools on hand. I now have proper scribers and a centre punch.

  • @user-ey5rl8tx1x
    @user-ey5rl8tx1x 2 ปีที่แล้ว

    Можна узнать скока вам лет ??

  • @plang42
    @plang42 ปีที่แล้ว

    You should have remanufactured the entire shaft as it is really out of true, it was wobbling badly when you had it in the lathe. The hole wasn't even in the centre.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  ปีที่แล้ว

      I adjusted the spindle to run true to the threaded part. Surprisingly the mounting end wobbled like crazy when the threaded part runs true. Some day I have to change the spindle to an acme type.

  • @ramonmichaud3004
    @ramonmichaud3004 3 ปีที่แล้ว +1

    A bit of wd40 works wonders when milling or cutting aluminium.

  • @puzzled4163
    @puzzled4163 2 ปีที่แล้ว

    Did anyone else see all the play in the compound slide and that there was no visible lube on any of the moving parts?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว

      You mean at the beginning of the video? That was to illustrate how sticky the compound slide spindle is due to it's not existing bearing. Even with the complete loose gibs (that's why it wiggles like crazy) the spindle gets stuck because of misalignment and no proper seating.
      Lubricration was missing, yes.

  • @superkas
    @superkas 2 ปีที่แล้ว

    What mini lathe brand is that? Chinese one?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว

      Artec was the german reseller.

    • @superkas
      @superkas 2 ปีที่แล้ว

      @@WeCanDoThatBetter So is it rebranded?

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว

      @@superkas Yes I think. In germany this machine is selled as Sieg C2 from different retailers. They look all the same and probably came from the same factory in china.

    • @superkas
      @superkas 2 ปีที่แล้ว

      @@WeCanDoThatBetter Nice, thank you!

  • @tluanem
    @tluanem 2 ปีที่แล้ว

    👍👍👍

  • @dazedandconfused3682
    @dazedandconfused3682 3 ปีที่แล้ว

    You'll need a plain bearing, too.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว

      Where do you mean, a plain bearing is needed?

    • @dazedandconfused3682
      @dazedandconfused3682 3 ปีที่แล้ว

      @@WeCanDoThatBetter These ball bearings are for the axial forces. Regularly, lathes have a plain bearing just right to that ball bearing for the radial forces. They go together.

    • @dazedandconfused3682
      @dazedandconfused3682 3 ปีที่แล้ว

      @@WeCanDoThatBetter It's the manufacter's fault. It should have one.

    • @dazedandconfused3682
      @dazedandconfused3682 3 ปีที่แล้ว

      @@WeCanDoThatBetter You have made it a lot better that it was before. The mechanism wasn't right from the start.

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  3 ปีที่แล้ว +2

      @@dazedandconfused3682 Thanks, yes it was not good from factory. I used a ball bearing for the radial forces and two axial needle bearing for the axial forces. Now everything should be covered :)

  • @richardquebec5850
    @richardquebec5850 9 หลายเดือนก่อน

    Malheureusement sa nous prend un Tour-a-métaux pour améliorer notre Mini-tour a métaux j'ai pas sa voyer vous!!

  • @skipgoryews1356
    @skipgoryews1356 2 ปีที่แล้ว

    Your lack of under standing on how a center punch works is failing you also drilling and taping loose items . Good luck and stay safe !

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว

      Thanks for your comment. I've learned a lot since then and now have other equipment.

  • @janmedlin2554
    @janmedlin2554 2 ปีที่แล้ว

    no sound no way

    • @WeCanDoThatBetter
      @WeCanDoThatBetter  2 ปีที่แล้ว

      Sad. But as a non english speaker I feel better not talking and just letting the work noises and images tell their stories.

  • @Evgeny_Miroshnichenko
    @Evgeny_Miroshnichenko 3 หลายเดือนก่อน

    И это рукожопство ты называешь "сделать лучше"? Это шутка такая? Когда измерения выполняются даже не инструментом, а пальцами? Одиннадцать минут бесполезного видео...

  • @ericsteel7643
    @ericsteel7643 2 ปีที่แล้ว +2

    Ahh...... using a precision bent nail as a scribe. Now that's a McGyver move rite there. Yeah I doubt you youngsters know who McGyver was 🤣

  • @gangleweed
    @gangleweed 2 ปีที่แล้ว

    LOL.....oh you people, by the time you finish ïmproving" all those bits that are total rubbish you will have a new lathe........if you decided to sell this lathe for a better one you would have to get double or more than you originally paid for it which makes your labour costs approx 10 cents an hour..........LOL, your union is letting you down on those rates.
    Can you now understand how/why the Chinese are selling these machines for such a low price?

    • @stevedavey1343
      @stevedavey1343 10 หลายเดือนก่อน

      Which better lathe, for a beginner, at a similar upfront cost, with easy accessibility, reliable parts availability, and decent backup from the seller, would you suggest?
      We don't all live in a country where you find well-cared-for, inexpensive, South Bend's at every garage sale you wander into or with an importer as good as Precision Matthews.
      Secondhand lathes outside the US are fewer and further between, and so the chances of unknowingly buying scrap metal are much greater. No beginner should have scraping their ways as a first project.
      You can learn a lot and have a lot of creative fun upgrading a Chinese mini-lathe to where it's usable for hobbyist work.
      Still and all, you and your 'real' lathe owning mates carry on waving your big-boy dicks around. We'll just ignore you and keep on having fun.