Setup and Program Arduino Uno: Complete Guide
ฝัง
- เผยแพร่เมื่อ 9 ธ.ค. 2016
- Lets learn How to Setup and Program Arduino Uno. We will first install Arduino IDE and then write an very basic arduino program to blink and LED using Arduino Uno
DOWNLOAD ARDUINO IDE/SOFTWARE:
Browse URL: www.arduino.cc/en/Main/Donate
If you have any question feel free to leave a comment
Thanks !
This Is the the best Arduino introduction video I've ever seen. Superb
Thanks Reeta,
I'm glad to see you found this Arduino tutorial useful
Good luck and best wishes
Better explanation than the product manufacturers themselves. Cheerio
Thanks Razor!
Hi ,
Can you pl help in getting program for reading 4-20ma input (flow meter value) and send sms to two users in sms format with totalizer value everyday one time and when required
Simple and to the point, superb video👍
Hi Nirmith, glad you liked it
Hi mate..thank you for your workshop. I’m planning to get one and I need to ask you an information. What I need to do is setting it up in a way that it makes 3 different impulses at different time intervals e.g 1st impulse 60 sec then 2nd impulse 30 sec and 3rd impulse other 30 sec..and on and on like this forever. Is it possible?
Dude your a hero 🙏👍👍
I appreciate your comment Brandon. Thanks
Is additional works without PC after upload codings
thank u for vedio very helpful
Thank u so much
Ok, not any closer to knowing how to program an Arduino, however I might be closer to being legally deaf due to those drastic volume changes.
Video is very helpful!
Glad it was helpful!
Hello so my co-worker has been messing with this Arduino we have, but now he is out for a while, So I am trying to connect to our Nano and READ WHAT HE HAS ON THERE..... but when I connect it...… how to I just PULL UP what is on there...?/ connect to it..?! / View the code he has on there?!?!?!?!? Please and thank you for your help!
everyone asking for the application just check the description
Bro Thanks So Much very clear and simple
Glad it helped
What should be used for the hand controlling arduino.Means what example should be used
It consists in an artificial hand controlled by a glove with flex sensors. The artificial hand reproduces the movements of the hand with the control glove, wirelessly. The hand and the glove works both with Arduino
Can we rewrite a program in Arduino. Also can we install two or more programs and select any one program at a time?
U can rewrite
Thanks!
I had done but your project but it replying as -problem: uploaded to board
Nice work bro, one question, does we select same things and software for Ardurino Uno R3 also? Thanks
Hi Inderjot, thank you! It will work with all Arduino Uno variants including Uno R3
Best wishes!
Best video ever
Thanks Alakh!
Whill this suit for ardino uno R3
It can also be done in android... Isn't it???
Is it possible to change software after completion of uploading software?
yes, there is a reset button on aurdino
@@hashikvu5730 thank you brother
Is it necessary to connect arduino with computer after completion of code
Hi Meena, Yes! you must connect Arduino Uno board with Computer in order to upload the code and see if it works. Good luck and best wishes!
Thank bro
We are working on a robotic arm. And we are using an Ardino uno in it. So can we use the same program in it....
Hi Shaik, it depends on how your robotic arm build. If your robotic arm uses Arduino to control then yes.
I have verified my program and uploaded the same to Arduino uno, it showed done uploading without generating any error, but on Arduino uno board, like as you shown, the yellow light was blinking but in my circuit yellow light is not blinking but is continuing to glow without any blink, so is there any problem with the upload or is it fine!?
Hi Jash, seems like your upload works well. Maybe you can try connecting external LED to Pin13 of Arduino Uno and give it a try. And check if your on board LED damaged. I hope this can help you. Good Luck
super
good work bro
Thanks Syed
Best wishes!
Hi bro! I know a little knowledge of c... Can I create a calculator using this ? By installing some numbers and operator buttons?
Yes you can!
cool👌👌👌
Bro plz telll🙏 can we use printer cable for Arduino Uno?
Yes you can use normal printer cable. It will work with Arduino Uno to connect with laptop for uploading code.
Do we need to download any drivers for audrino uno to show itself in computer
Hi Vijayp, make sure you install Arduino IDE Software before you connect Arduino Uno to Computer. Because while installing Arduino IDE it will install all necessary drivers by itself. Good luck!
Thanks
Which programming language should we know for operating it?
Hi Arbin, the basic working knowledge of C Programming is enough to program Arduino
When software installed which light blink
Tx or Rx
Arduino Software installation has nothing to do with LED Status. Your question is wrong. Maybe you want to ask when you upload Arduino Sketch on Arduino Board then Rx LED receive light-up just for few seconds to indicate Arduino Uno board has received code into the memory of microcontroller. Good luck!
Is it possible with aurdino uno, to simple home automation I mean 2 lamps and 2 fans...
Yes its possible you can use relay and other dimmer circuit to turn ON AC light Bulb or control FAN Speed using Arduino. You can find video on our channel about how to use relay with blynk and other IoT platform. I hope this may help you. Good luck
Is it necessary for the computer to be connected with the aurduino when it runs bro?
Hi Hemant, its necessary to connect Arduino to Computer while uploading code on microcontroller chip. But when programming is done then you can power up Arduino with stand alone battery. This is because your code remain their running from flash memory of microcontroller on Arduino. I hope this answers your question.
Sir how to reset this pc because my pc was lagging
That's cool
What is the name of that your arduino app you used?
Arduino :/
I cannot see Arduino in Port can you please help me
Can we copy and paste the code? Is it safe?
Hi, yes if you're learning Arduino Programming.
Good luck and best wishes!
Which usb cable should i use?? Is normal charger usb ok?
no
Very good
Thanks Sree, I hope you've enjoyed this Arduino Programming lesson!
Best wishes!
Well we can see it alright.
Can i directly disconnect the Arduino from pc after the burn?
Yes you can disconnect USB Cable of Arduino Uno from Laptop. This will safely disconnect Arduino from PC because code still remains there into the Flash memory of an Microcontroller of Arduino Uno. Wish you good day. Thanks
holy moly ... my ears are crying
I'll remake this Arduino video soon with better Audio quality. Thanks for your patience. Good day!
@@BINARYUPDATES hey no bro... sorry if offended... i learnt from this video. once again apologies
Which board do you lots use I use uno
I often use Arduino, Raspberry Pi, NodeMCU ESP8266 and STM32 Microcontroller Boards for my Projects
Site in description has a mandatory donate.
No need u can download without donating
does it work whitout connection to the arduino or does it need to be plugged in
No, you must connect Arduino Uno to Computer over USB Cable.
Good luck and best wishes!
@@BINARYUPDATES is there any way to make it work whitout needing to be connected to a computer
Im asking if i could replace the computer whit a battery after having uploaded the code
What do we have to install?? What's the name of the application?
If you don't know that much..... I wouldn't even bother trying....!
We have to install an Arduino Uno R3
Hey i just want to paste a program how to do that for my . Engineering project work ?
Hi Tejas,
You can use following code to upload on your Arduino Uno
void setup() {
pinMode(13, OUTPUT);
}
void loop() {
digitalWrite(13, HIGH);
delay(1000);
digitalWrite(13, LOW);
delay(1000);
}
I have a claw machine, which i would like to setup something like this to move the claw and drop the claw by using my computers keyboard. Any ideas, where to start?.
Hi Juan, you must start learning Arduino Programming. Then learn how to use Servo motor interfacing with arduino project. There cool robotics arm you can build which will serve your purpose. Good luck!
Can you put the link of the code
Sir I'm getting
Avrdude: ser_open () ; can't set com-state for "\\.\COM4"
error.. what to do now!. Please help
Hi Rahul
You can try two things,
STEP-1: Make sure your Arduino COM Port is detecting properly in Device Manager
STEP-2: Uninstall Arduino IDE and reinstall. Also tried to restart computer if needed
This issue has to do with Arduino IDE. Sometimes install not happens properly and IDE couldn't recognizes the compiler and hardware connected to computer which is result throw this error. I hope this may resolve issue. Good luck!
@@BINARYUPDATES sir I have already done this thing many times. But still getting this error again and again.
am unable to install the software
Hello i have code for my arduino uno board but i dont know how to put it can u plz tell?
hi Junaid, you must connect Arduino Uno using USB Cable to Laptop. And then from your Arduino IDE you can UPLOAD Code on to the microcontroller sitting on Arduino Uno Board. I've shown entire process step-by-step in this video lesson. Thanks and have a goo day
@@BINARYUPDATES 😊 thank you so much but my young explorer was in 7 jan and we also won first price tq so much
@@8a12junaidkhan7 hello which usb cable did you use ??? Normal charger one will be fine or not
can you make for smart
parking
I'll consider making smart parking or similar project in future. Lets see when I get time. Good day!
Is it still the same process in 2021?
Hi Noushad, the process is same as nothing has changes in Arduino world till today. you can try. Good luck!
Arduino name not showing in my laptop
Very low sound 😔😔
isme printer ka cable support krta hai ya nhi?
Yes Arduino does supports printer cable to connect with PC/Laptop
@@BINARYUPDATES thanks
So how to reset the audino board
There is an RESET switch on Arduino Uno Board
Problem uploading to board messages constantly. Please help🙏🙏
Please provide more details about issue, on how you've connected Arduino Un to PC and What exact issue is happenning? and at which step?
@@BINARYUPDATES it's ok,did it on a macbook worked fine. Thx for replying. Keep posting vids.
@@cptsponko32 gazab kya baat hai😂
i did it but its telling me that problem uploading to the bord!
Hi TeTo, are you sure you've selected right COM port from "Device Manager" and did all setting properly under Tools section of Arduino IDE while Uploading code. Also I suggest to try with other USB Cable if power become an issue while uploading sketch. Good luck and best wishes!
Arduino Uno used for what purpose?
You can build robotics, embedded systems & IoT devices using Arduino Uno.
@@BINARYUPDATES can i control Fans,lights,ac,fridge on mobile by Arduino Uno?
bro how to program new code
Hi Shabby, to program or upload new code in arduino. You must follow the same procedure as shown in this video lesson. Everytime you upload new code the older program will get overwritten in memory on microcontroller of an Arduino. I hope this may help. Good luck!
can you tell the name of the cable
Its simple USB Type-A to Type-B USB Cable for Arudino Uno
Your app is green, and why is the app I downloaded is black?
I guess it maybe because your Arduino IDE is using a dark theme so it may look black. In my case I use default light theme. You'll find these options under File and Preferences if in case you wish to change in your Arduino IDE. Best wishes!
How to download software ? It’s free ?
Hi Omkar, Arduino IDE is a free and open source. You can download from official website of Arduino. Good luck and best wishes!
Do we need to pay for this
Nope bro
no you don't
When I plugin my Arduino UNO with USB to my system.then only green and L led is illuminated. Nieither L orange led flashing nor my PC found any external hardware..
Please advise
Bro I am getting some error can you please help me
Hi Charan,
Let us know more about issue you're facing with Arduino IDE to program MCU.
cable price of rdno uno
HI Ganesh, Its normal USB Type-A to Type-B Cable used for Arduino Uno. This cable can cost from 50-100 INR Apprx. in India
So if you switch to arduino your mic becomes louder So immediately I lowered the volume So after that again you switch to laptop So It became like mute and then you just suddenly cut your video So...and So..
Thanks for your input Jobert
Ide aplodong arrear 0 cord
First I'd like to ask onething, What is main purpose of arduino not other uses . Anyone is not clearly telling it. Can u please tell.
Arduino is easy among all other microcontroller boards to get start learning microcontroller programming. I hope you may find useful. Thanks
Fauk shet ran enge dlet ylwal byea asbialhu mslhe fauk
Sir mere arduino bord me programing nhi ho rhi hai
Hi Akash, check if arduino drivers are installed properly. Let me know if your COM port is detecting or not in device manager. Good luck!
I is moms computer os!
Sound is low
Sorry for inconvenience caused. I'll try to fix it in new video
Sound kahan h
My port was not showing
Hi Sudipta, you can connect with other USB Port of your of Laptop. If in case you're using older OS like Win7 or Win8 then probably you need to reinstall Arduino IDE to make sure Arduino USB drivers are installed properly. Also do check in your device manager if COM Port shows up with name Arduino. I hope this might help . Good Luck!
How to make Arduino hamun following robot code upload like kar do
Hi krishna, to make human following robot you should learn programming Arduino. its will involve lot of programming and sensor connections. Only code may not help you. Good luck and best wishes!
video starts at 1:59 no need to thank me
Cant hear.
Hello sir , Your voice is not audible
Please speak loudly bro
Cannot hear your voice
Please follow this
I'll fix it from future video lessons. Thanks for your input
Best Wishes
Arey Bhai aavaz to AA hi nhi ri h
i does not understand
ة
Vioce is not clear brooo
I want to free arduino
There are plenty of Giveaway's online you can participate on platforms like Mouser, Digikey and various community groups. You can try to get Arduino Uno. Good luck and best wishes!
buy a better microphone dude
Ur voice not audible,we are not satisfied
the people will revolt due to the slight inconvenience of having to lean over to turn up their speakers
Sir i want to contact you
Hi Saad, please use comment section for Arduino related questions to ask.
I'll be happy to help you here
Best wishes