How to use a BreadBoard - Electronics Basics 10

An insight into how breadboards work. Build with me! As I build a simple led circuit. Subscribe for more!
Twitter: / simp_electronic
Facebook: / simplyelectronicsyoutube
If you would like to support me to keep Simply Electronics going, you can become a Patron at / simplyelectronics

[@phantormia6182]

I have a science final tomorrow and I need to make a circuit using a breadboard, so this was a huge help. Thank you for making this. You made it so much easier to understand.

[@valuedhumanoid6574]

This is a very good way of doing experiments. I am a guitarist and I am constantly tone chasing. I will take a breadboard like this (only 4x bigger) and play around with pedals to see what does what. Just going from a .049 mF Orangedrop capacitor to a .030 mF value will change the tone significantly. I will modify pedals, potentiometers and circuits to see what does what. A great tool.

[@chrisgallagher85]

OMG!!! Thank you for this. I'm an artist, and a visual learner. Your visuals have allowed my brain to fully understand a breadboard for the first time. You have a gift for teaching good sir.

[@henriquefernandesbreves6003]

Thank you, sir. I have learned more in these 7 minutes than in 3 hours worth of Robotics classes. I wish you a very good day.

[@im_Spade_]

I wish I had seen this channel when I was going through college. XD Just going over this playlist (Simply Electronics Basics) as a refresher. You rock.

[@arunanishantha7679]

nice

[@arunanishantha7679]

Thanks

[@bobbyleggins3900]

ikr

[@aftershock2222]

Thank you, I needed a refresher course on how to use my bread board.

[@majicMix911]

This was amazing. I now have a super basic understanding of the skematics I have been looking at. They make sense.

[@kevinlester]

watching this a few times helping me get through my basic Electronics course when I know nothing about it. Thank you

[@scottraines7419]

I sure want to thank you for taking the time to make this video about breadboard basics. I too have always had a slight interest in electronics, and especially LED basics. I have acquired a breadboard, a power supply, various colored what I would call RAW LED's, some pre-wired LED's and for the immediate time being, a 9V battery and a few 9V battery connector leads. Your video has helped in getting me started in the very basics. I just need to learn how to use the power supply. Thanks very much.
Scott

[@suefreer2600]

thank you for a simple newbie project in clear language, with clear, easy to follow visuals!

[@leogolive]

Makes all the sense in the world. Great explanation of how this works!👍🏾

[@murkypuddle33]

Thank you so much for actually explaining how it works, rather than just showing us basic circuits! This stuff is so interesting! I can't wait to try this!

[@NFOsec]

I have to say, I've always had a fascination with electronics at a level in which I wanted to build things... your videos have inspired me to continue this trek and I've learned quite a bit along the way. Thanks!

[@faucher8]

Hey man! Just saw your video 7 years later and I just wanted to say thank you. The tutorial is amazing 👌

[@nitendocube9835]

Thanks for teaching the basics.

[@jeffreyv4199]

Thanks for explaining it so easy and detailed!

[@cri8tor]

Great video.
Thank you for taking the time to record and post it.
Cheers m8

[@xmanchar]

Thanks for pointing out the orientation of the LED that was very helpful for my troubleshooting a problem.

[@africanwriterstv4088]

This is excellent tutorial. I give it 5 stars. Very helpful. Kudos.

[@messi._]

thx that was really helpful and straight to the point

[@Birol731]

Thank you very much for your informative explanations.

[@charviscreativechannel3320]

Thanks for teaching this one . I was not known to how to use bread board once again thank you

[@sunwaytrading6004]

this is great! It's helped me a lot when i was doing electronics

[@AnkoWillie]

First video to watch on using a bread board. Last video i need to learn to use a bread board :-D. Very clear and concise.

[@junemishima]

There are many contents but It was the most usefull I think. Great explanation and demonstration

[@khalida6327]

Best explanation ever. Thanks!

[@mohom._]

THIS VIDEOS ARE VERY HELPFUL

[@777passion]

Video helped me understand. Thank you very much!

[@perceptivecrow4408]

Exceptional video. Very informative and quite helpful. Just subscribed. Thank you.

[@noulaz3523]

You deserved a subscribe! I didn't know a lot of things about breadboards, but I learned many things now thanks to you 👍🏼

[@neverendingmusix6256]

Amazing video I am going to use ur teaching for my comp exhibition thank u

[@alimihakeem841]

Thanks for the explanation. A great one

[@turuus5215]

thank you, things made so easy.

[@arinzengonadi3471]

Thank you so much for this video, it really helped me a lot.

[@minjusgf]

this was so helpful THANK U SO MUCH!!

[@avibingplaylist6381]

This is the first video I've found thats been useful

[@robhamilton5057]

liked and subscribed. literally just starting out in this, I've got an Arduino and a beginners kit...looking forward to more of your videos. Thank you

[@umavathir4597]

first i don't know the principle of the bread board.but after watching this video i got an clear idea of the breadboard.

[@user-hl6fu7ku5p]

good video, I learned a lot 😁. My future kids will love this video 👍

[@Bayonettamachinekill]

Incredible explanation

[@notevenea8277]

Awesum video for some1 like me just starting out. Thanks

[@strafniki1080]

Good explanation sir thank you!

[@lakshyajoshi9686]

Thanks, explained better than my electronics teacher.

[@ExploringDarknessGhostM6edia]

BECAUSE He Likes Music !..The Video Was Very Informative And It Helped People Like Me , This Guy Took The Time To Make A Video And We Get To Watch It For ( FREE ) AND You Gride About A Little Music...Thank You For Taking The Time To To Make This Video..GregM from EXPLORING DARKNESS .

[@usamaaslam8295]

That's really amazing my all queries are now cleared thanks alot

[@alanpayne1442]

Great video course for beginners to electronics hobbies

[@fiazswl]

thanks man you saved my life!

[@pritipatel3453]

Great video. Very informative and one of the best video for the beginners to understand electronic circuit.

[@akuakali610]

it gave i an insight, thank you so much

[@thatbee4923]

perfect!
this wa exactly what i needn

[@AlhamRana]

Liked and subscribed

[@mahirgulbarga247]

Nice explanation And understood all thank u sooo much ❤️😇😇

[@yeonieee1]

This is so helpfulll. Thank you for this. That's why I wonder when I put the LED onto the end of the breadboard and put the power supply on the opposite end it didn't lit up. I really thought that my breadboard was broken.

[@richardyates5321]

Really helpful

[@RobMacKendrick]

Thanks for the straightforward and very understandable video!

[@jainishchauhan1333]

great explanation

[@jaegercrown964]

Dude thanks a lot for this explanation

[@novayt56]

Sir, Thank you so much. This helped me so much I know I can make so many more arduino projects. :)

[@kemaketseforkssebitiela3089]

Perfect i love it

[@arturotorres6437]

I'm doing a basic electrical theory course online and the labs are challenging because it is self-thought and I'm watching all these youtube videos to get an idea. Miss the days when an instructor was there to guide you and give you instant feedback, but I guess this is the new normal...

[@jasonolafami4528]

this is so true. especially in my math class where my math teacher justs puts the answers on the board without going step by step to how he got there. Then he asks us to do the next question without guidance from the prior example😭😭

[@maggiereeve118]

Omg thank you so Much LOL you have Save a 8th Grader With a Project about the Solderless breadboard and Explained it a lot Better then my Teacher XD

[@wickmilla]

Thank you it helped so much

[@seerat8561]

awesome video. Thanks

[@Geaxuce]

Is there any rhyme or reason as to why you plug the wires where you do? For example, the 2 connections of the jumper cable? Or could the positive end of the jumper wire be placed anywhere on that positive side?

[@mylifepart2]

Thank you I learned something here...

[@sanjitbhadury1751]

Amazing Bro.

[@rdxsathvik3986]

Good job 👏 bruh iam so proved to being an electronics student 😊

[@revocatuspaul42]

Thank you sr I have tried it and found out that it works

[@Haffmatthew]

Great video: thanks!

[@thihakyawhtin3264]

I love forever your hobby♡

[@guze_wolf9973]

Thank you so much!

[@user-fg9ji9dv8v]

Wow it's actually so easy and always i got confused with that 😂 thank you bro

[@chethank2426]

can we connect leds in series?

[@charlie1872]

Really enjoyed this. I would like to add a flickering welders light to my model railway. Can I modify this circuit to add a flickering light? Thanks very much

[@shermanchensteam.hyperpoly60]

Very good! Very concise to follow

[@mommheenonghi8063]

you did great!

[@speedskis777]

Hey did you need to download a driver for your Sunfounder Uno? I'm having unknown device issues on my windows 8.1 :(

[@TelldyPius]

The video was good I love it

[@fizyaonline]

Excellent

[@DiegoGomez-pk5tg]

This shit helped so much. Thank you!

[@run1492]

Ohmygod! it's full of stars ! 😍 My first real circuit, thank you, really.

[@castletransport]

can you rely on EveryCircuit to design a working safe circuit or is it worth having it checked before making a circuit and have it blow up on you?

[@peterloader974]

Very nice.

[@dougscott2408]

This was great - electron flow went through the resistors first before returning... consistent with the battery video you episode 3... still waiting for the explanation to the last two videos - electron flow went opposite to what you said - again why... I only ask because this messed me up for years - I know you have a great explanation - I just need to hear it :-)

[@nickpierpoint4116]

I now understand these, I didn't at all during college, my tutor was crap

[@abriwin]

Thanks, maybe I'm jumping the gun but it would be nice to see the video include the resulting circuit.

[@user-nz7ir8bx7h]

Thank you thank you❤

[@Tnapvrvideo]

What resistor wattage (1/4, 1/2, 1, or 2) is probably best for 15V applications using a breadboard for HO Scale LED lighting projects? Is it safer to go higher on the watts even though 1/4 watt seems to be the most prominent size sold in large packages. Thanks!

[@dibyojyotibhattacherjee4279]

work out the physics, I guess, it'll help you out...

[@NethmalJayaniduThabla]

well done

[@nainascreativity612]

Electronic's is the best 👍👍 in our clubs we have stem sub in which we studied about bread board which was very interesting

[@AviaGaming123]

Thank you 😊

[@Ahmad_khadiri]

Hey i have 1 question Are the blinking led was the resistor and other and make it on -50HZ?

[@jumbo999614]

I have many jumper wires that suddenly became broken. I tested them with multimeter using contiuity mode and didn't hear any beeping.
How long can this thing last?

[@tomchamberlain8072]

thank you!

[@akanshchoudhary527]

THANKS A LOT !!!!!!

[@zohaibjahangeer2414]

Thanks man. i am subscribe your channel too

[@entercoolment]

on the arduino do i connect the negative terminal to the ground and the positive any pin number on the arduino?

[@eddiegomez4134]

Thanks!

[@williamkakooza4603]

Thanks bro

[@arrowdriver007]

Bought a BB about 20 years ago and never knew how to use it until now.