Hello from the United States my Friend. I like your idea of placing floor padding to make your job more comfortable and easier. I now do the exact same thing when i work on my vehicles. 👍
I like the way you put two lots of stands under the car you can never be to careful to many just put a jack under and then the dreadful thing happens and those rubbers on the drop links need replacing thanks for the video another job well done
Another Job well done…….Just curious…After you finished the clutch replacement…will you advise customers of any other potential problems you might have spotted when working on the car….With this car in question, noticed the cracked cv boot and split far side suspension arm ball joint gaitor….the ball joint looked shot…
I can just imagine what it would be like should Clutchman here decide to train a team of guys to work in his company. They'd probably all have to master Bruce Lee's Jeet Kune Do, before they'll be allowed anywhere near a clutch. It'll be discipline first.👌
While I understand the element of surprise in martial arts, I'd still prefer wielding one of your well-targeted hammer blows to a tough opponent...I mean to a car's tough components. Can't get the two mixed up, right? LOL! 😂
I'm making light of a really tough job on this particular make and model. I'm again taking a leaf from your book of determination to get the job done. 👉 Great.
What an excellent video and work ethic much respect! Quick question is the exedy hck2053 215mm kit used in this video the same on both the 8th and 9th gen honda 1.8 manual petrols would you know?
@@WMCS Thank you so much for the reply, guess I will find out once the old one is out 😅 I've ordered the Honda Urea Grease to go along with it but was wondering if red rubber grease would be as good for the job. Keep it up though man your videos are a joy to watch!
Hi Kevin, I'm from Portugal and I really enjoy watching your videos, because I learn some things that help me in my work. Can you tell me if on a Peugeot 407sw 1.6hdi I need to lower the chassis to change the flywheel, clutch and fork? Thank you so much for everything.👍
Love your videos Kevin, just doing this job on your own always amazes me, well done mate. May I ask you please, why you use the red rubber grease on bolts? And finally, when inserting the gearbox back into the motor, would trying to force the input shaft into the pilot bearing damage the bearing? Cheers
I know this sounds mean, but the bad weather, rain then ice and snow is just around the corner, i prefer watching you work in those conditions just simply because i wouldnt do it for twice what you charge.
Hello kev,top notch work as allways,, May i ask a question please kev if i may, I really like the knee pads you were,the fact that they bend,and have 2 straps,,please may i ask ,where did you buy them from,and what make are they..thanking you very much indeed stephen.
www.williamsmobileclutch.co.uk 🇬🇧
Submit enquiry for price and availability.
Thanks for watching.
Kind regards.
K-A. Williams.
What a mechanic 🙌I’d Never do that job tbf to complex and never road side. Big pops to you fella . !!!!!
God bless William. He bust his ass in any weather. To get the job done right...
Always excited when you share honda jobs
You’re a Honda fan I take it.
Hello from the United States my Friend. I like your idea of placing floor padding to make your job more comfortable and easier. I now do the exact same thing when i work on my vehicles. 👍
well done kev another good job under your belt mate keep up the good work well done
I like the way you put two lots of stands under the car you can never be to careful to many just put a jack under and then the dreadful thing happens and those rubbers on the drop links need replacing
thanks for the video another job well done
Honda and their damn sensors 🙄. Great work by the way, I’m also a mobile mechanic I sure do enjoy watching your videos
Ciao kelvin ti seguo sempre, non vedo l'ora che fai un video su fiat bravo, complimenti, ancora buona giornata da l'italia, ✌️👍👋
Have a 98 honda prelude ,will be doing clutch soon.221,000 miles on it . Exedy clutch kit
Toujours professionnels 👍👍
Buen trabajo, otro cliente contento.! 👍👍👍
and its a thumbs up from me Kevin👍
Профессионал :)
Another Job well done…….Just curious…After you finished the clutch replacement…will you advise customers of any other potential problems you might have spotted when working on the car….With this car in question, noticed the cracked cv boot and split far side suspension arm ball joint gaitor….the ball joint looked shot…
That’s correct. Then they can follow it up with their local garage.
Awesome video as always
Hey kev 🙂 have a good weekend to attack a new week in joy and good mood 😅🏅
That’s it mate .. hustle harder than a dealer 😁🍻
c est bien de voir une fait en detail nickel on tout cas ta pas besoin de faire de la musculation en fait tout les jours !!
Keep it up homie 👏🏻👏🏻
Love your videos, I wish you are in Australia and do clutch replacement for my civic
william home clutch service that big william
I can just imagine what it would be like should Clutchman here decide to train a team of guys to work in his company. They'd probably all have to master Bruce Lee's Jeet Kune Do, before they'll be allowed anywhere near a clutch. It'll be discipline first.👌
While I understand the element of surprise in martial arts, I'd still prefer wielding one of your well-targeted hammer blows to a tough opponent...I mean to a car's tough components. Can't get the two mixed up, right? LOL! 😂
I'm making light of a really tough job on this particular make and model. I'm again taking a leaf from your book of determination to get the job done. 👉 Great.
Best Video😊
Hi kevin on a new clutch set like this the springs on the disc should be tight or turn freely by hand? Keep up the good work!!!
It should be free. It will lock in place when it’s spinning
Nice work
Gezuz, I think HONDA wins the "lets see how much shit we can bolt onto the gearbox" contest....
Which portable car lift are you using and why not by all cars? Thanks
do both driver side and passenger side CV joints have to come out on the 1.4 litre fk1 version?
What an excellent video and work ethic much respect! Quick question is the exedy hck2053 215mm kit used in this video the same on both the 8th and 9th gen honda 1.8 manual petrols would you know?
It should be the same as they share the same flywheel. But sometimes there’s slight discrepancies in the number of teeth on the spline ..
@@WMCS Thank you so much for the reply, guess I will find out once the old one is out 😅 I've ordered the Honda Urea Grease to go along with it but was wondering if red rubber grease would be as good for the job. Keep it up though man your videos are a joy to watch!
No Clutch Replacement Vito/Viano/Sprinter?.
Hi, u never use for SAC clutch recommended special tool?
Hi Kevin, I'm from Portugal and I really enjoy watching your videos, because I learn some things that help me in my work. Can you tell me if on a Peugeot 407sw 1.6hdi I need to lower the chassis to change the flywheel, clutch and fork? Thank you so much for everything.👍
It’s quite straight forward but yea you have to lower the subframe a bit.
Have a look thought the channel for a 1.6hdi engine full repair
Hi is it Part number hck 2053 exedy?
Love your videos Kevin, just doing this job on your own always amazes me, well done mate. May I ask you please, why you use the red rubber grease on bolts?
And finally, when inserting the gearbox back into the motor, would trying to force the input shaft into the pilot bearing damage the bearing?
Cheers
No wonder this is a dying art,lots of work
Sometimes I cringe at some of these genuine comments ..
I know this sounds mean, but the bad weather, rain then ice and snow is just around the corner, i prefer watching you work in those conditions just simply because i wouldnt do it for twice what you charge.
That’s a genuine feedback. Watch this week’s video for some heavy rain and wind 🌬
Just out of curiosity, how many hours does it take you to do this on one of these Civics?
About 3.5hrs from landing to taking off
🔝😉💪🏻
Man I have 402000km on my original clutch in my 09 civic I hope I never have to replace it lol
That has got to be a 2k job
Honda 👍👍
What is your opinion about Aisin clutch? Thx!
One of the best in the business. Far superior than European brands.
@@WMCS Thx. I have to choose between aisin and exedy
👏👏
👌👌👌
Do you cover liverpool NW?
Not that far
👌🤝
Hello kev,top notch work as allways,,
May i ask a question please kev if i may,
I really like the knee pads you were,the fact that they bend,and have 2 straps,,please may i ask ,where did you buy them from,and what make are they..thanking you very much indeed stephen.
363801385888 item number off eBay
Thankyou loads kev
👍👍👍👍👍💪💪💪💪💪👌👌👌
YOU DO IT WITH EASE.
Good work
👍👍👍👍👌👌👌👏👏👋