Thank you very much for saying that. We just do us and everything falls into place. I appreciate you watching and the kind words and taking the time to leave a comment.
If anyone wants these the Mac truck should play this video. It cleared up a lot of stuff for me. I want theses even more now. Wish I had a Mac dealer in my area. I like to hold them before I buy them. What a great line of tools.
Got the hexl set...and swapped out all my standard torx for RBRT. Amazing the bolts that these things get out. Every box needs them. The bite is unreal. Iv never stripped a torx or allen since
Great video mr. Clay. You are the best tool reviewer on you tube, honest and truthful much better than the bear. J. Young is the oker and wild bill is the highest approver. If wild bill says thumbs up there is no higher recommendation. You do not and never will let salesman sway you. Keep up the good work and more videos.
How did you like that when I said let’s use these brand new triple squares I have ! Haha those RBRT bits are hands down bad to the bone ! They work. I seen it. I felt them. They work !
@@KoonTrucking that what put you on top. Keeping a salesman honest. The only one to come close to that was snap on tool review with the new flank drive plus wrenches. You proved the point flawless. I donot care what anyone else says mac has a good product.
Ive had a set of the hex for while, have not used them much. I was told by my mac dealer they were for rounded out hex bolts. learned what they really are. thanks
Yeah there’s been some misconceptions about these tools and I’m very thankful that Dan came to do the demo and educate us all on how to properly use them and why. I am a firm believer after seeing the demo first hand that if you use these first (and it can come out) then it will come out without any issues. The fit ent is amazing and you can feel the tool actually bite into the fastener and that is what it’s all about ! Getting that bite!
Great video Clay. I work on fitness equipment for a living, and I deal with the cheap Chinese bolts everyday. These will be added to my tool assortment very soon. I also am one of those guys that has a hard time getting to a tool truck because I am on the road everyday and do not work on things at my shop. Thank you for asking about internet sales as this will help many like me who don't have a truck coming to them. You put out a ton of great videos, I am grateful for all that you do for all of us.
Thank you very much and I can feel your pain with those Chinese nuts and fasteners ! Bless you my friend!! These would defiantly make your life easier (and a battery ratchet of course). Thanks for watching and showing some love to the channel. It’s much appreciated !
I have the torx set. They are awesome. I have been waiting for my MAC guy to start coming back. He hasn’t come in since the Covid ordeal hit. I want the allen set next.
Another problem is some don't clean the dirt and crud out with a pick or small screwdriver first and finally blowing it out with compressed air.I agree on not seating it in all the way too stripping them out.Some even don't break them loose by hand first hitting them with an impact wrench rounding them out
Excellent demonstration of those bits and their usage. If I did much work I would definitely get a couple of those sets. Perfect video. Thanks for sharing.
Thanks Clay and Mac Tools for your time and video. It's interesting to see the technology that all the tool manufacturers introduce and the differences between them. I will be looking for these here in the U. K. Keep on wrenching 👍🛠️🔩🔧
hi guys!! thanks for the awesome video!! im totally sold on these tools and will be ordering the mac rbrts!!! the snappy allen sockets will come home!! cheers guys!
Can atest to these. Own torx and Allen's. Use the Allen's often. Can think of two vehicles in our fleet that I've removed the expansion valve several times and reinstalled the partially rounded bolts. Size being 5. Only issues I've had are the metals seem soft as I've twisted the 5 twice, but they work amazingly typically.
Wiha screwdrivers are the best I have found. Made in Germany. Use a bit of lapping paste for tough ones. If it is Japanese, you may be stripping them because they aren't Philips, they are JIS. Look the same but they aren't. Get some Vessel screwdrivers. They are JIS. The Vessel Impacta will take out tough Philips and JIS. Craftsman did a badge engineered Impacta. Go watch a video. You will get it.
Just bought the triple squares as here in the uk they are very common, haven’t got to use them yet with current the situation however super excited and I’ve bought a set of hex from my dealer just now.
I am usually not a fan of tool truck brands. However, sometimes there are items like this that are great. I have some Snap-On retention style spark plug sockets, a design I cannot find elsewhere. This is another great example of one of those tools. I really appreciate the time to demo the products and explain how they work. The problem though ... people who work on their own cars will usually not be able to afford tools like this, or only be able to afford a small amount of them. For me, I have 2 sizes of the Snap-On retention spark plug sockets, the most common sizes I encounter. The rest, I simply cannot justify the cost no matter how good they are.
And I bought a set of allen/hex key thinking they were a Torx bit set and then realized they weren't and was disappointed then saw this video and now know and they are fantastic great bid explaining there intended purpose!! Great video!!!
Got the mid length SAE chrome hex set and the stubby Torx set. They really are great. Definitely a leap forward. I work on Harleys a fair amount so lots of Torx and Allen head bolts and screws. The Torx on the derby cover in particular are notorious for stripping, usually because somebody tried removing them with a T25 instead of the T27. I agree Clay, these RBRT bits should be in every "starter set" of tools.
I really wish I hadn’t just bought the Matco ones. Don’t get me wrong they are great but seeing this...hard not to want it. Also smart move using your own bit, removed any doubt I had. Very well informed and I look forward to getting some RBRT bits.
Yeah I wanted to prove that this wasn’t some smoke and mirrors because someone would have commented that he manipulated the tools to slip on purpose and as we all seen that wasn’t the case
Mac Tools should pay me a commision. I bought my set of RBRT sockets about a year ago. (keep in mind that I'm an Electrician not an auto mechanic), two of my electrician coworkers seen (and used) my set and then they also went out and bought RBRT sets. Another friend of mine who builds decks uses hex head bolts, I showed him my RBRT set, he flipped for them and he ordered him a set from Mac's website . . . . .then our shop foreman noticed some of us carrying those red Mac Tools blow mold cases in some of the work vans and asked "What are you guys all buying from Mac Tools?", so we showed him, and I be danged if he didn't immediately go online and order him a set too.
@@KoonTrucking just got them in right now. Took em out to the garage and one Pull that fastener was out. Amazing job. Absolutely impressed thanks for the advice 👍🏻
These would have come handy when I was taking the drive shaft out of my car. It has a aftermarket one piece shaft that's loaded with hex head bolts. Two different sizes for the front and rear that needed a X long ball hex. I know that I'll be liking them enough to buy some.
Mac often sources their tools from other people. In fact, Mac is owned by stanley black and decker, who owns craftsman, so id expect these to appear under the craftsman name soon.
@@andybub45 Stanley owns almost every other tool company, besides Snap-On and Matco. But MAC is a separate entity. Nothing from MAC will be given to craftsman.
Watched this video during my lunch break at work, bought the torx set the same day, coincidentally the Mac guy showed up the same day.
“Reach for em the first time every time”
Man that sales pitch is drilled deep into this mans core.
That guy invented rbrt
I’m addicted to buying tools
Yeah me too
me tool!!!
I second that
We all are...
Yeah
One thing I've known for decades is man does not live by one brand of tool thanks for talking about the options available Clay.
One of the best tool review videos I’ve seen in years.
Thank you
Wow. Mac is coming strong this year. 💪
There are many Tool Truck Videos, but, yawls are the best, and most fun to watch! thank you.
Thank you very much for saying that. We just do us and everything falls into place. I appreciate you watching and the kind words and taking the time to leave a comment.
Thanks clay and Jay after watching this I ordered the 14 piece hex set
Well gosh dang, looks like something I never thought was going to happen is going to happen, MAC will be making an appearance in my box.
Haha this is my first Mac experience too, honestly I have been impressed !
Mac tools would have to make an appearance at the shop first!
One heck of a salesman right there..!
One of the best tools I've ever purchased, hand's down!!!!
If anyone wants these the Mac truck should play this video. It cleared up a lot of stuff for me. I want theses even more now. Wish I had a Mac dealer in my area. I like to hold them before I buy them. What a great line of tools.
hats off to mac tools
Got the hexl set...and swapped out all my standard torx for RBRT. Amazing the bolts that these things get out. Every box needs them. The bite is unreal. Iv never stripped a torx or allen since
Thank you for sharing the new rbrt technology!
Awesome video Clay, I really Appreciate the Demo of the RBRT's!
Nice..!!! Thanks for the demo
Excellent demo/presentation guys! Thank you!
Thanks Clay. Great video. Gonna get some of them ordered next week from my Mac guy out here in So Cal.
Great video mr. Clay. You are the best tool reviewer on you tube, honest and truthful much better than the bear. J. Young is the oker and wild bill is the highest approver. If wild bill says thumbs up there is no higher recommendation. You do not and never will let salesman sway you. Keep up the good work and more videos.
How did you like that when I said let’s use these brand new triple squares I have ! Haha those RBRT bits are hands down bad to the bone ! They work. I seen it. I felt them. They work !
@@KoonTrucking that what put you on top. Keeping a salesman honest. The only one to come close to that was snap on tool review with the new flank drive plus wrenches. You proved the point flawless. I donot care what anyone else says mac has a good product.
Cant wait for part two. Keep the Mac videos coming!
Great video and great demonstration, Clay!!!!
Damn that’s freakin cool. These are definitely going to be finding space in my top drawer
Great video! Love that you guys have mac tools now, I'm a fan!
Ive had a set of the hex for while, have not used them much. I was told by my mac dealer they were for rounded out hex bolts. learned what they really are. thanks
Yeah there’s been some misconceptions about these tools and I’m very thankful that Dan came to do the demo and educate us all on how to properly use them and why. I am a firm believer after seeing the demo first hand that if you use these first (and it can come out) then it will come out without any issues. The fit ent is amazing and you can feel the tool actually bite into the fastener and that is what it’s all about ! Getting that bite!
I just got mine today, first purchase from a tool truck to be honest and so far im loving the job!
Great video Clay. I work on fitness equipment for a living, and I deal with the cheap Chinese bolts everyday. These will be added to my tool assortment very soon. I also am one of those guys that has a hard time getting to a tool truck because I am on the road everyday and do not work on things at my shop. Thank you for asking about internet sales as this will help many like me who don't have a truck coming to them.
You put out a ton of great videos, I am grateful for all that you do for all of us.
Thank you very much and I can feel your pain with those Chinese nuts and fasteners ! Bless you my friend!! These would defiantly make your life easier (and a battery ratchet of course). Thanks for watching and showing some love to the channel. It’s much appreciated !
I have the 17pc 1/4 set he mentioned i love it great quality they have pulled out loctite hex head screws at 5/32 size
I can’t wait to pick up some of these extractors 😉
Great video! Dan knows his stuff .I burn up hex bits all the time. Once again you have cost me money. Keep up the great work !
Very cool little set.
I have the torx set. They are awesome. I have been waiting for my MAC guy to start coming back. He hasn’t come in since the Covid ordeal hit. I want the allen set next.
Great vid Clay! Keep the Mac vids coming.
Great video and information thanks for sharing
This is the best tool video I've seen in a long time very interesting
Another problem is some don't clean the dirt and crud out with a pick or small screwdriver first and finally blowing it out with compressed air.I agree on not seating it in all the way too stripping them out.Some even don't break them loose by hand first hitting them with an impact wrench rounding them out
Hi Mr. Clay,
Great video can't wait til the next one comes out.
Awesome tools! Can't wait to see more from Mac.
Excellent demonstration of those bits and their usage. If I did much work I would definitely get a couple of those sets. Perfect video. Thanks for sharing.
A heck of a video. Very informative!
Now that’s cool I have to have them I use hex and torq every day and I hate when they strip wow that is going in my box ASAP
👊👍i need such tools,how can I get mine
I absolutely love my rbrt bits
I am in the Construction field i use all of these so i will be ordering all of the sets.
2009cnice damn, your company got a fat tool allowance xD
Definatly going to purchase a set.They are going to be a real time saver.Great video once again klay keep up the great work.
Dude did a good job selling the RBRT. Just the right amount of I’m selling you but not really.
They really work well I've been using them for around a year
Awesome video Clay!! Looks like that’ll be on my next order from MAC. I have that mini ratchet he was using, worth the investment.
Thanks Clay and Mac Tools for your time and video. It's interesting to see the technology that all the tool manufacturers introduce and the differences between them. I will be looking for these here in the U. K.
Keep on wrenching 👍🛠️🔩🔧
Great video!!! Guess I will be paying some new sockets.
I’ve got the mid length hex and long torx sets. Worth every penny.
Thanks for the review. Ordered the 40 piece hex and 26 piece torx from the truck today!
hi guys!! thanks for the awesome video!! im totally sold on these tools and will be ordering the mac rbrts!!! the snappy allen sockets will come home!! cheers guys!
Can atest to these. Own torx and Allen's. Use the Allen's often. Can think of two vehicles in our fleet that I've removed the expansion valve several times and reinstalled the partially rounded bolts. Size being 5. Only issues I've had are the metals seem soft as I've twisted the 5 twice, but they work amazingly typically.
Worth every penny ! i bought the hex, torx, sockets, stud removers. Yet to break one or ruin the tool, I use them 50 times per day.
Next, develop the Philips head RBRT.
Heck yeah !!
Best luck ive had for Philips is the wera laser tips but they wear out fast
Wiha screwdrivers are the best I have found. Made in Germany. Use a bit of lapping paste for tough ones.
If it is Japanese, you may be stripping them because they aren't Philips, they are JIS.
Look the same but they aren't. Get some Vessel screwdrivers. They are JIS.
The Vessel Impacta will take out tough Philips and JIS. Craftsman did a badge engineered Impacta. Go watch a video. You will get it.
Shhhhhhhh.... You never know whats next for the MAC Exclusive R.B.R.T.
Grab some Vessel JIS impact bits, you won't be disappointed.
Just bought the triple squares as here in the uk they are very common, haven’t got to use them yet with current the situation however super excited and I’ve bought a set of hex from my dealer just now.
Hey, when I hit the like button, it flipped from 999 to 1K!! That's a first for me.
Great video y'all have a great week and stay safe 👍
I am usually not a fan of tool truck brands. However, sometimes there are items like this that are great. I have some Snap-On retention style spark plug sockets, a design I cannot find elsewhere. This is another great example of one of those tools. I really appreciate the time to demo the products and explain how they work. The problem though ... people who work on their own cars will usually not be able to afford tools like this, or only be able to afford a small amount of them. For me, I have 2 sizes of the Snap-On retention spark plug sockets, the most common sizes I encounter. The rest, I simply cannot justify the cost no matter how good they are.
And I bought a set of allen/hex key thinking they were a Torx bit set and then realized they weren't and was disappointed then saw this video and now know and they are fantastic great bid explaining there intended purpose!! Great video!!!
Cool technology. Really a game changer as it stands.
Got the mid length SAE chrome hex set and the stubby Torx set. They really are great. Definitely a leap forward. I work on Harleys a fair amount so lots of Torx and Allen head bolts and screws. The Torx on the derby cover in particular are notorious for stripping, usually because somebody tried removing them with a T25 instead of the T27. I agree Clay, these RBRT bits should be in every "starter set" of tools.
Saw these on my Mac truck a few months ago. Definitely cool.
Great technology
Have the 1/4 set as well as the extractor set. Won’t start a job without them!
Man I’m buying a set this week for sure.
Good demo! I added them to my wish list.
Those are really cool. Got to get those.
Koon & Young; Doing the right thing, setting the record straight, doing it just for you ! Sounds like an ad for a lawyer's office. Great vid!
Haha
Getting on Mac website now. Thanks for the info
Hmm very good video I've heard about them definitely gonna get on a Mac truck and check them out
Just ordered the 20-PC. Metric Master R.B.R.T. Hex Driver Set.
Cannot wait for it to get here.
I really wish I hadn’t just bought the Matco ones. Don’t get me wrong they are great but seeing this...hard not to want it.
Also smart move using your own bit, removed any doubt I had. Very well informed and I look forward to getting some RBRT bits.
Yeah I wanted to prove that this wasn’t some smoke and mirrors because someone would have commented that he manipulated the tools to slip on purpose and as we all seen that wasn’t the case
This guys an amazing salesman.
I saw these a while back.
I think it’s time I upgrade my hex bits. I didn’t know it had that pullout foam tray. That’s pretty sweet.
Great video and demonstration. Gonna order me some
Get me one of those! They should make an Allen key version of this
Hello! L-key part# S.A.E. :SHKL13RBRT Metric: SHKML9RBRT will be available online and on trucks in a couple of weeks, thanks!
Amazing technology
That's awesome...game changer 🤔👍
They changed the game for everyone to follow now
👍 nice technology
I've always used a torx bit on rounded Alan's for years. This is just a technology breakthrough
Great stuff, thanks for the video!
Woah Clay shaved for the day with Dan!
Mac Tools should pay me a commision. I bought my set of RBRT sockets about a year ago. (keep in mind that I'm an Electrician not an auto mechanic), two of my electrician coworkers seen (and used) my set and then they also went out and bought RBRT sets. Another friend of mine who builds decks uses hex head bolts, I showed him my RBRT set, he flipped for them and he ordered him a set from Mac's website . . . . .then our shop foreman noticed some of us carrying those red Mac Tools blow mold cases in some of the work vans and asked "What are you guys all buying from Mac Tools?", so we showed him, and I be danged if he didn't immediately go online and order him a set too.
That’s awesome. They are pretty impressive
Have used these on hexes that are almost complete rounded out. Gets them off everytime! I highly suggest you guys try them.
There great really get some rounded Allen bolts out love them 👍 coulnt recommend them enough, they really do work
I needed these today. Gonna pick some up ASAP.
They work
@@KoonTrucking just got them in right now. Took em out to the garage and one Pull that fastener was out. Amazing job. Absolutely impressed thanks for the advice 👍🏻
These would have come handy when I was taking the drive shaft out of my car. It has a aftermarket one piece shaft that's loaded with hex head bolts. Two different sizes for the front and rear that needed a X long ball hex. I know that I'll be liking them enough to buy some.
Haha sounds like you got some buying to do now
I use them a lot, they are not extractors, but they do work. If my snap on starts to weeble wobble, I grab these. First thing I bought from Mac.
Man good video Mr Koon!
Shoot why didn't they have these back in the day. Great looking and concept on these torques sockets
Haha no kidding !
Life savers I have them love it Mac Tools
I have the Allen head type for a year now and let me tell u I approve this message
mac needs a master set like blue point has the 83 piece bit set.
Dan the man, becoming a TH-cam star. RBRT is the real deal
they do look nice wonder if they make a 14mm 1/2 jcb drain plugs always round out
T Yorkshire Man Hello! We do make them in 1/2 drive 11mm - 19mm and 1/2 - 3/4 Thank You!
Who else is betting some Chinese manufacturer is taking a lot of notes when looking at those 3D printed models?
Haha no doubt. Someone will try to copy these for sure !
@Jon Doe Looks like that will change hopefully after wrecking the economy
Mac often sources their tools from other people. In fact, Mac is owned by stanley black and decker, who owns craftsman, so id expect these to appear under the craftsman name soon.
@@andybub45 Stanley owns almost every other tool company, besides Snap-On and Matco. But MAC is a separate entity. Nothing from MAC will be given to craftsman.
Stanley owns all. Only company that shares mac hand tools designs is proto. Which is USA made and very high quality
Traded in my snap on torx sockets for a set of rbrt torx. Absolutely love them! No going back for me 👍
Rbrt need in my life!
Well shoot now i gotta ask my Mac dealer for a set! The long hex ones I needed yesterday
Wow, what a great salesman...I almost thought Mac might be good...lol...but really I'm gunna buy these.... nothing else from Mac.
These are nice i was super impressed with them