The front sight is in a track. Just loosen screw that’s is exposed when you flip front sight up. Then push it left or right. When your good, snug the screw.
Aftermarket iron sights would also work. I would definitely try the solution offered by several gentlemen herein: loosen the sight set screw and adjust right or left. Repeat for the remaining sights if necessary.
Almost bit on one but couldnt get past the short barrel...ended up with a NOTOS .It is nice to have a fellow North Dakotan doing videos ,I am from the Fargo area.
To be fair its a PCP pistol that can be converted to a microcarbine. I recommend Monstrum Tactical prism scopes I put the 1.5X models on my .177 and .22 Jet 2's.
@@northdakotaplinking9794 I put a Monstrum P330 X3 on my AEA SF standard .30 and i think I like it, other than the left is actually right on the windage! but other than that it seems like the real deal Holyfield!
Good video man, I appreciate it. I'm pretty sure you don't want all three sights up. Everything I've seen indicates that you use the rear sight of whichever mode you're in (carbine vs. pistol). Appreciated the deeper look at the. Firearm, will like.
@BadAphorism thanks. This has already been brought up a few times, but I was never using all 3 sights at once... just comparing them on camera. Was a quick review on a friend's gun that I didn't expect to get this many views. As it turns out, there is an adjustment for the front sight.
@Michael Brown Thanks. I have the manual, but it says nothing about front sight adjustment. Only rear elevation. Do you have this gun? If so, what kind of adjustment is it? I no longer have the gun, but still have the manual.
Il me semble que tu as une visée pour l'utilisation en mode pistolet et une visée pour l'utilisation en mode carabine courte à l'épaule, tu ne dois pas utiliser les deux en même temps. Ton générique de début, excellent !
Thanks. So there is an actual adjustment on the front site or you had to rig it? I no longer have the gun but don't recall there being an adjustment in the front sight and know for sure manual said only back sights adjusted for elevation .
uh....22wmr (22 mag) is a rimfire cartridge. these are air guns here bud. and .25 pellet can be had very cheap and is not niche at all. Maybe you are thinking of .25 automatic colt pistol.
Interesting ... hmmm I guess I didn't notice that with my setup. The groups I got were actually pretty descent. Most almost touching each other and a couple through the same hole. What pellets are you using? Maybe need to find the ones that gun likes perhaps.
@@pointnozzleaway you'd think caliber shouldn't matter, was just confirming. I've never heard that before with the mags distorting the pellets. Maybe if someone else has had the same issue they can chime in...
This is a friend's gun that I no longer have, but yeah, that's something I'd probably do if I had that problem. However... we found out after the fact that front sight actually is adjustable. ha
Yes you can, you can use either, but the front sight is what was off. To update, the front sight can actually be adjusted. This was s friend's gun I was reviewing and didn't have a lot of time. The manual said nothing about a front sight adjustment. But I found out later there is one hiding lol.
You don't use all three open sites on a gun at the same time . . On Saturday gun right beside the sights it tells you the two that are for the carbine and the two that are for pistol . . . Nobody in their right mind uses all three sites at the same time . . I think it's more the person than it is the gun missing the target . . . I don't know where you learned to shoot a gun at . . . Is Scott Lil Wayne groovement by the sites that let you know one is for the pistol and one is for the carbine . . . But know where does it say use all three open sights at the same time . . Like I said I don't know where you went and learn how to shoot a gun but you didn't learn very well .
😆 🤣 😂 😆 I just read that entire comment in the voice of sling blade. First off, I wasn't using 3 sights at once. Watch the video! I'm either using the carbine set or the pistol. The angles where you see all three I am comparing them.... not actually trying to shoot with them.
![[TH] 2024 PMSL SEA W2D2 | Fall | เครื่องร้อน พร้อมลุย](http://i.ytimg.com/vi/JO2_bLow_1Y/mqdefault.jpg)
You can adjust the windage. When you unscrew the screw that fixes it you can move it left or right. It’s not a perfect solution but it’s work 😊
The front sight is in a track. Just loosen screw that’s is exposed when you flip front sight up. Then push it left or right. When your good, snug the screw.
Aftermarket iron sights would also work. I would definitely try the solution offered by several gentlemen herein: loosen the sight set screw and adjust right or left. Repeat for the remaining sights if necessary.
Almost bit on one but couldnt get past the short barrel...ended up with a NOTOS .It is nice to have a fellow North Dakotan doing videos ,I am from the Fargo area.
Awesome... thanks for watching! I'll have to check out the NOTOS.
I bought some cheap 33 gr slugs for ground squirrels. Love it in the jet 1.
Sweet... We'll maybe have to give it a try on the next jet 1 we come across.
To be fair its a PCP pistol that can be converted to a microcarbine. I recommend Monstrum Tactical prism scopes I put the 1.5X models on my .177 and .22 Jet 2's.
Thanks I'll have to check those out !
@@northdakotaplinking9794 I put a Monstrum P330 X3 on my AEA SF standard .30 and i think I like it, other than the left is actually right on the windage! but other than that it seems like the real deal Holyfield!
@@jeffcarpetguy9778 Very cool. That AEA is a great gun. Someone should do a review on it. Ha
Pretty accurate up close!
Usually it's the very rare sight that has windage on it and sometimes it's elusive it might be a simple little Allen screw
Good video man, I appreciate it. I'm pretty sure you don't want all three sights up. Everything I've seen indicates that you use the rear sight of whichever mode you're in (carbine vs. pistol). Appreciated the deeper look at the. Firearm, will like.
@BadAphorism thanks. This has already been brought up a few times, but I was never using all 3 sights at once... just comparing them on camera. Was a quick review on a friend's gun that I didn't expect to get this many views. As it turns out, there is an adjustment for the front sight.
You can really see how the middle or "Carbine" sight is off to the left when you line them up like that.
Hi the windage adjustment is on the front sight hope that helps you.
@Michael Brown Thanks. I have the manual, but it says nothing about front sight adjustment. Only rear elevation. Do you have this gun? If so, what kind of adjustment is it? I no longer have the gun, but still have the manual.
The front one can move from left to right
Il me semble que tu as une visée pour l'utilisation en mode pistolet et une visée pour l'utilisation en mode carabine courte à l'épaule, tu ne dois pas utiliser les deux en même temps. Ton générique de début, excellent !
awesome.God bless.
Thanks and same to you!
I'll buy it when I get the cash!
It's louder than my Marauder.
Nice gun,but No Thanks,
My "PCP" is 80 lb pistol crossbow,with proper tip you can get wild pig,turkey or deer.Super simple weapon and very effective..
Nice, hope that works out for you.
You can bump those sites over with a screwdriver or small hammer
It was too easy,,,,lol, got it figured out now.
subbed after the intro
A good sized Spread too!
The front sight left-to-right
@Marshall Keves do you have this gun?
@@northdakotaplinking9794 yes I do have that gun I had to move my sight
Thanks. So there is an actual adjustment on the front site or you had to rig it? I no longer have the gun but don't recall there being an adjustment in the front sight and know for sure manual said only back sights adjusted for elevation .
Nice 👍😉
And did you get a new one?
@@Relaxbadkneeadventuressorry just seeing this. No, this was friend's gun that he returned shortly after the review.
@@northdakotaplinking9794 okay thanks have a great weekend
My jet 1 has the same problem with the middle sight
Can I make my jet 2 have one slightly larger tank?
👍🏻🎯✌🏻
Which laser is that? Do you have any info on it please?
It's a Gmconn laser that I got on Amazon, I want to say $19.99
what about the side mounted laser? what brand and where did you buy it? cost?
It's a Gmconn laser that I got on Amazon, I want to say $19.99
If it was in .22 mag, I’d get one. That caliber is too niche to even bother with.
No .25 caliber pellets are readily available.
uh....22wmr (22 mag) is a rimfire cartridge. these are air guns here bud. and .25 pellet can be had very cheap and is not niche at all. Maybe you are thinking of .25 automatic colt pistol.
I think the mags distort my pellet skits. I have no consistent accuracy
Interesting ... hmmm I guess I didn't notice that with my setup. The groups I got were actually pretty descent. Most almost touching each other and a couple through the same hole. What pellets are you using? Maybe need to find the ones that gun likes perhaps.
@@northdakotaplinking9794 I am actually using the Crosman Premier Domed 14.3
@@pointnozzleaway Ok so you have the .22 caliber ?
@@northdakotaplinking9794 yep. I know you have the .25. just curious
@@pointnozzleaway you'd think caliber shouldn't matter, was just confirming. I've never heard that before with the mags distorting the pellets. Maybe if someone else has had the same issue they can chime in...
Just get a basic low zoom scope
This is a friend's gun that I no longer have, but yeah, that's something I'd probably do if I had that problem. However... we found out after the fact that front sight actually is adjustable. ha
Can you just put the middle site down?
Yes you can, you can use either, but the front sight is what was off. To update, the front sight can actually be adjusted. This was s friend's gun I was reviewing and didn't have a lot of time. The manual said nothing about a front sight adjustment. But I found out later there is one hiding lol.
What was the distance to target?
I didn't measure it off, but I'm guessing 30 ft?
Ok thanks.
@@northdakotaplinking9794
You don't use all three open sites on a gun at the same time . . On Saturday gun right beside the sights it tells you the two that are for the carbine and the two that are for pistol . . . Nobody in their right mind uses all three sites at the same time . . I think it's more the person than it is the gun missing the target . . . I don't know where you learned to shoot a gun at . . . Is Scott Lil Wayne groovement by the sites that let you know one is for the pistol and one is for the carbine . . . But know where does it say use all three open sights at the same time . . Like I said I don't know where you went and learn how to shoot a gun but you didn't learn very well .
😆 🤣 😂 😆 I just read that entire comment in the voice of sling blade. First off, I wasn't using 3 sights at once. Watch the video! I'm either using the carbine set or the pistol. The angles where you see all three I am comparing them.... not actually trying to shoot with them.
I see you zeroed the laser but not the sights, but I don't blame cause the laser sights are perfect for home defense.
More of a red dot guy myself, but I can see why people like them.