Thanks Brother... I'm using this to document Recovery of Missing Persons in the vehicles underwater. We have solved 5 Cold Cases this year. The export to Pro Res 442 tip is a big help, I always shoot in darkness and low visibility, the compression was pixelating my exports. Much appreciated. 🙏
finally a video with a tiny bit of out of water footage while using the case, thank you for reviewing that part. i think it will still be worth it to get the invisible dive kit for my trip away.
Great info. Question for you. When recording in dive case mode is there an indicator that tells you it’s really in dive case mode? I can’t tell. The screen looks the same as it does when in regular mode. I just want to be sure I am in fact still on dive case mode when underwater. Thanks
Thanks for this review! I will refer back to it when I do my first underwater shoot with this cam next month. Interested to see how it works without a red filter ect.
Thanks for the video, it helps me a lot how to use my use underwater case. I used already and my videos were blurred. I do the setting you recommended. Thanks again 😊
my record button does not work when i put the camera in diving mode. when i press the button, it just takes me to the custom selection screen.. any idea why its not work properly?
Thanks for the review. Do you know of any carrying cases with pre-molded holes that hold the invisible case? The invisible case is thicker than the Gen 1 case and I cannot find any carrying cases that can handle it.
Hello Werner, thank you for all your great tips. I will use them when I go on a snorkeling vacation. Can you tell me if the x3 fits in the new invisible diving case along with the self-adhesive lens protector? It doesn't fit in the old diving case...
Hi - I'm not sure if it still fits with the lens guards - but you shouldn't use them in the dive case - this could have a negative effect on the image quality.
@@MountMediaChannel ok thanks for your opinion. I'm a motocycle rider and like to protect the real lenses... I can not afford some new protect lenses everytime I switch from dive case to not... looking for a solution of Insta...
hello, nice video! Little question, can you make still pictures with a delay of 3 sec or more to be able to move the stick away, I saw on the Video that you can change from video to still but not with a delay?
On insta360's site, there's a chat button on the lower right. They said the reg selfie stick is waterproof. I would imagine you'll want to rinse it with clean water after every use
Great video about underwater filming… took note that you said you should have the case perpendicular to the sun. However noticed at ~12:25 it was not??? Is this possibly because it appeared that you’re diving deeper and at that point refraction is less?
Hi! I have used X3 for video at 30 mt underwater but when I have used the torch to have more light, the image become completly red! How can I solve this problem? Thank you!
I've watched nearly every video I can find to solve my issue. I've updated the PC studio, the app and camera. Yet, for some reason both of my cameras will not operate in the new dive case. It's still working like it would in the old case where you still use the front buttons to start and stop recording. I've never gotten the option to switch to the new case. Been at this for 4 hrs now with no luck. I've got no idea what to try. Any ideas?
I was wondering why my stitching is funny, didn't know that you need a diving case for it! but that damn case is expensive as shit! so I stayed using the action cam instead.
A question: If I may have you compared the results of the old case with the new one, I found yesterday that I video quality was poor compared to the old x3 case. Mostly, the sharpness of the image?
@MountMediaChannel no for obvious reasons. I hope to go in a deep pool with the x3 with both cases. I will swap the cases and repeate I will change the case software setting. Obviously, the version of the firmware will be different
I tried today with the new underwater case… very disappointing. Blurry as hell. Colors are mehhh. My old DJI Osmo is doing 10x better… I will try to switch the sharpness to high and not low as you have recommended…
Thanks Brother... I'm using this to document Recovery of Missing Persons in the vehicles underwater. We have solved 5 Cold Cases this year. The export to Pro Res 442 tip is a big help, I always shoot in darkness and low visibility, the compression was pixelating my exports.
Much appreciated. 🙏
finally a video with a tiny bit of out of water footage while using the case, thank you for reviewing that part. i think it will still be worth it to get the invisible dive kit for my trip away.
Strong video! Clear structure, great tips, and super calm speaking! Love it, helped me a lot!
Great info. Question for you. When recording in dive case mode is there an indicator that tells you it’s really in dive case mode? I can’t tell. The screen looks the same as it does when in regular mode. I just want to be sure I am in fact still on dive case mode when underwater. Thanks
You can check it via the buttons - they get new functions in Dive Case Mode
Should we not use HDR mode for video in this dive case?
It's my favorite camera for underwater!
The link to the lanyard attachment is not on the description. Is it no longer available?
Hello Sir . How to Set up Start/stop recording with quick button.?
Love the idea of trying out the full 360 underwater. Thanks for the great review, it's on my shopping list 😊👍
Thanks for this review! I will refer back to it when I do my first underwater shoot with this cam next month. Interested to see how it works without a red filter ect.
Is the camera, dive case and and selfie stick neutral underwater?
when you dive with the selfie stick does it get damaged by salt water or rusty ?
In the long run yes - you should always clean it with fresh water
THANK YOU planing on using in Barbados. i had the old dive case and plan on gettting the new one. This video is helping me prepare
Hi MountMedia , whats the regular settings underwater less light due to the wall
good job thanks for your video on the dive case x3 do you have on for the x4 with dive case?
No - probably coming this summer
와 완벽한 영상이다. 인스타 360 X3를 구매 하기전 반드시 봐야 할 영상입니다.
Thanks for the video, it helps me a lot how to use my use underwater case. I used already and my videos were blurred. I do the setting you recommended. Thanks again 😊
my record button does not work when i put the camera in diving mode. when i press the button, it just takes me to the custom selection screen.. any idea why its not work properly?
I believe the software/firmware has not been updated on the camera?
How do you breath underwater not blowing bubbles staying under so long?
Do you know if the aliexpress generic one is the same of the oficial dive case that costs 2x more?
No, didn't try it out
Good advice on the last point. Thank you!
I know it's made for underwater, how is the scratch resistant? Wondering if I should buy one, cut the housing in half and use it as lens protector.
very helpful thx :D
Hi great video! Can you use HDR mode in dive case?
Great reviews, very strong spot for x3 and you deserve more subscriber.
Thanks heaps for such a great review. Truly appreciated! 😊🙌
can this invisible case be used in an X2 as well?
No, it's just for the X3
does invi stick dive case on x3 works on x2 also?
Not sure, but I think it doesn't
Thanks for the review. Do you know of any carrying cases with pre-molded holes that hold the invisible case? The invisible case is thicker than the Gen 1 case and I cannot find any carrying cases that can handle it.
Hi - no, not sure if there is such a case
do you think it is good for use it for diving? i always dive in 5-7m underwater
Thanks for the comprehensive video! So useful!
Hello Werner, thank you for all your great tips. I will use them when I go on a snorkeling vacation. Can you tell me if the x3 fits in the new invisible diving case along with the self-adhesive lens protector? It doesn't fit in the old diving case...
Hi - I'm not sure if it still fits with the lens guards - but you shouldn't use them in the dive case - this could have a negative effect on the image quality.
@@MountMediaChannel ok thanks for your opinion. I'm a motocycle rider and like to protect the real lenses... I can not afford some new protect lenses everytime I switch from dive case to not... looking for a solution of Insta...
Do you think there will be underwater filters in the future?
Thank you ❤
😮 That’s awesome!
hello, nice video! Little question, can you make still pictures with a delay of 3 sec or more to be able to move the stick away, I saw on the Video that you can change from video to still but not with a delay?
Yes, that is possible - you just have to set it before you activate dive case mode
toooooop bro thank youuu❤❤❤❤❤❤❤
Very nice indeed! But insta360 does not offer a waterproof selfie stick....or did they change this?
On insta360's site, there's a chat button on the lower right. They said the reg selfie stick is waterproof. I would imagine you'll want to rinse it with clean water after every use
Great video about underwater filming… took note that you said you should have the case perpendicular to the sun. However noticed at ~12:25 it was not??? Is this possibly because it appeared that you’re diving deeper and at that point refraction is less?
😀 No - to be honest, I just don't always manage everything perfectly either
@@MountMediaChannel thanks, I’ll test it out 🤙🏽
Can it stitch normally on the ground
Can i use sticky lens guard inside the invisible dive case?nor do i need to remove it
I think you should remove it
Hi! I have used X3 for video at 30 mt underwater but when I have used the torch to have more light, the image become completly red! How can I solve this problem? Thank you!
Same problem. The deep blue sea turns into red..😢😢
Is there for one x2?
Great
I've watched nearly every video I can find to solve my issue. I've updated the PC studio, the app and camera. Yet, for some reason both of my cameras will not operate in the new dive case. It's still working like it would in the old case where you still use the front buttons to start and stop recording. I've never gotten the option to switch to the new case. Been at this for 4 hrs now with no luck. I've got no idea what to try. Any ideas?
I have same Problem. Did you found a solution?
@@MsSmilegirl98 I did. And I made a video how to do it. It's on my channel amberdogproductions on TH-cam
@@MsSmilegirl98 th-cam.com/video/IuQDq070X60/w-d-xo.htmlsi=hLhmGC6nmIh0ykBA
Is it worth it? I want buy it for my channel
Difficult to answer - underwater shots with invisible selfie stick effect are cool - but the housing is also relatively expensive.
I was wondering why my stitching is funny, didn't know that you need a diving case for it! but that damn case is expensive as shit! so I stayed using the action cam instead.
Yes, true - it is expensive
A question: If I may have you compared the results of the old case with the new one, I found yesterday that I video quality was poor compared to the old x3 case. Mostly, the sharpness of the image?
have you made a direct comparison in an identical situation?
@MountMediaChannel no for obvious reasons. I hope to go in a deep pool with the x3 with both cases. I will swap the cases and repeate I will change the case software setting. Obviously, the version of the firmware will be different
Kind of sad that without dive case it is blurry as he said in 360 mode I wish I knew
👍👍👍
I tried today with the new underwater case… very disappointing. Blurry as hell. Colors are mehhh. My old DJI Osmo is doing 10x better… I will try to switch the sharpness to high and not low as you have recommended…
You loose some color but the uses out way traditional cameras. The 360 aspect was awesome with my group to catch everything.