Thank you! I have a singer Futura II and this helped a lot. I had to manually guide the thread into the bobbin slot because it was struggling to catch. Then it worked great 👍
Sir, I have been messing with my Singer Touch-Tronic 2000 for two hours. I finally looked at this video and I got it threaded in less then ten minutes. Thank you for the clear to understand and short video.
The first machine you showed is the Athena 2000 first one sold in 1975 the first electronic machine made I purchased it for my mother the first week on sale in Chicago. She sewed on it every day until she passed away in 2005 this machine was never in the shop for any repair in in 30 years. I had it serviced after it sat closed up for 17 years. What a machine. I think anyone would agree My mom was a retired seamstress so she kept it up herself. I now have it and hope I can keep it as well as mom did. Singer did us proud w❤it’s this one
I've been using one of these machines occasionally for years. Although I figured out part of this process on my own, I would never have guessed the other steps you've shown here. Thank you for sharing this short and very informative video.
thank you so much Paul! After you explained the mechanism beneath the bobbin and the cross on the bobbin itself, I checked mine and the bobbin cross was worn so it wasn't catching on the 'blade' that pops up when in 'wind' position! I never would've expected it to be the bobbin....kept thinking it was the machine! Thanks again!
Thank you for this video! I had forgotten how to wind the bobbin on my singer future ii 920... I’ve been playing around with it for days and couldn’t remember! Thank you!!!!
Thank you, thank you, thank you. Have an ancient Futura 925 that has this type of bobbin threading mechanism and couldn't quite figure it out! Now it's easy!
Thanks a bunch! I figured it (halfway) out, I didn't realize it kept winding after the thread broke, and I knew that couldnt be right cause it would only be 1/4 of the way full! It was purely operator error lol I Finally have a full bobbin!! Thanks again!!
Your video is very helpful. I just got an Athena 2000 at a yard sale and can't wind the bobbin. After watching your video, I'm newly encouraged to try again. Other than sitting here, manually winding a bobbin, is there any other way to wind the bobbin if the mechanism is broken? Thanks so much for your time in helping us.
I was having a lot of trouble until I tried a different bobbin. It would get started and then hang up. The bobbin would stop turning. I wouldn’t have realized I should try that if you hadn’t explained the little piece that pops up from underneath the bobbin when the latch is in the winding position. I think my plastic bobbin is old and maybe stripped. So thanks for the detailed explanation of how it works!
Hi thank you so much for this video..you are a life saver and you d be a hero if you show us how to thread the machine because i have some trouble with the vertical loop can t pass it through..i have a futura 1100. Thank you so much!!
I am having trouble finding a video on how to thread the machine. Do you have a video for that? It said I could find it at 1.37 of this video. But it's not here.
Jazzyj43 I found Sewing parts online.com for the 181551 bobbins. I just order 3 packs of 10 for 6.74. Phone # is 888-824-1192. Amanda, the sales rep told me they are out and it will be 4 to 6 weeks to get and then send to me. Good luck.
Hi Paul, This is the same set up as my Singer Futura 900! It is a great machine if I haven't messed it up, which I just did. It was working great before I went to wind the bobbin and forgot to set it back to straight stitch from zigzag. Now the wheel is jammed and only moves backward. I'm I right that this is a bobbin case issue? I've got my service manual! Thanks so much for showing this machine. There aren't many of these slant needle throats around!
It's hard to say why the thread is breaking. Always use good quality thread like Gütermann or Mettler polyester. Old thread can be rotten and break easily.
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
Hi, I have problem with the bobbin latch that the tension is not there any more, so it would not hold the bobbin in the position. Is this because the latch is broken? not sure...
I have Singer Touch-Tronic 2010 when I want to fill a bobbon their are 2 different stitiches I press on that panel as it turns to fill the bobbin the thread breaks off the needle stops going uo & down till its totally filled, is that on just the model I have ? thought this series all worked the same.
Thank you for this video! I was calling my Singer Sister my Psycho Sister, nothing in the manual I have for my Futura II model 920, says anything about the thread slot. My problem is now that little blade is not rising up in the bobbin case. I don't know if I need a new bobbin case. Does anyone have any ideas on this? Thanks again, GREAT Video!
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
Bonjour, j'ai une machine à coudre futura 2006, le rembobinage de la canette ne fonctionne plus. Le bras sur la gauche avec petite flèche rouge, est ''mou'' plus de clic pour maintenir la canette. Que faire! Merci pour un conseil
Hello Paul.... I have a question. My machine does not rise the the part that is supposed to click in the cross of the bobbing from the bottom part. Does this have a easy fix? Thank you for your time.
@@caitlinhurley3186 hi… it is because the bottom of the part he mentions is broken. Easy fix but in Canada is expensive and impossible to get. I end up buying it and it was never ship. It is the bobbin winder cam singer #381504. Good luck to you. $19.99 plus shipping from the USA. Like I said I paid for it and never got it.
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
Best, clearest, no-nonsense video out there. Thanks to this video I have prepared an unfamiliar machine and am up and sewing!! With no frustrations.
Thank you!!! I just inherited this machine from my recently passed grandmother and the manual’s instructions were as clear as mud 😂
That was extremely well-made and informative. Thank you
Thank you! I have a singer Futura II and this helped a lot. I had to manually guide the thread into the bobbin slot because it was struggling to catch. Then it worked great 👍
Sir, I have been messing with my Singer Touch-Tronic 2000 for two hours. I finally looked at this video and I got it threaded in less then ten minutes.
Thank you for the clear to understand and short video.
The first machine you showed is the Athena 2000 first one sold in 1975 the first electronic machine made I purchased it for my mother the first week on sale in Chicago. She sewed on it every day until she passed away in 2005 this machine was never in the shop for any repair in in 30 years. I had it serviced after it sat closed up for 17 years. What a machine. I think anyone would agree My mom was a retired seamstress so she kept it up herself. I now have it and hope I can keep it as well as mom did. Singer did us proud w❤it’s this one
I've been using one of these machines occasionally for years. Although I figured out part of this process on my own, I would never have guessed the other steps you've shown here. Thank you for sharing this short and very informative video.
thank you so much Paul! After you explained the mechanism beneath the bobbin and the cross on the bobbin itself, I checked mine and the bobbin cross was worn so it wasn't catching on the 'blade' that pops up when in 'wind' position! I never would've expected it to be the bobbin....kept thinking it was the machine! Thanks again!
Thank you for posting this video. Any chance that you might make a video on how to thread this machine?
Please do it!
I love you, you just saved me hours and hours!
I bought a used singer 2010 and this helped me troubleshoot the bobbin problems. thanks for the wonderful explanation of how the parts work!
Thank you for this video! I had forgotten how to wind the bobbin on my singer future ii 920... I’ve been playing around with it for days and couldn’t remember! Thank you!!!!
Thank you, thank you, thank you. Have an ancient Futura 925 that has this type of bobbin threading mechanism and couldn't quite figure it out! Now it's easy!
Can you please make more videos on how to use this machine. I can’t get my selector knob to go to different patterns of stitches. Thank you
♥️
Thanks a bunch! I figured it (halfway) out, I didn't realize it kept winding after the thread broke, and I knew that couldnt be right cause it would only be 1/4 of the way full! It was purely operator error lol I Finally have a full bobbin!! Thanks again!!
Thank you so much third time was the charm. Your instructions were clear and patient. Well done.
I have Athena 2000. My bobbin does not wind. TY
Thank you I had forgotten. The touch and sew was a wonder for me.
Thanks so much for the help! I couldn’t figure it out... and I have a bunch of masks to sew for the hospital staff. :)
Your video is very helpful. I just got an Athena 2000 at a yard sale and can't wind the bobbin. After watching your video, I'm newly encouraged to try again. Other than sitting here, manually winding a bobbin, is there any other way to wind the bobbin if the mechanism is broken? Thanks so much for your time in helping us.
I was having a lot of trouble until I tried a different bobbin. It would get started and then hang up. The bobbin would stop turning. I wouldn’t have realized I should try that if you hadn’t explained the little piece that pops up from underneath the bobbin when the latch is in the winding position. I think my plastic bobbin is old and maybe stripped. So thanks for the detailed explanation of how it works!
Thank you, I have a Singer Futura II I inherited from my mother and the manual is not very clear on how to do this. Thank you very much.
Thank you so much, very well done video and explained.
Thank you so much! This just saved me
Thanks for this video, was excellent explication
Merci pour votre video👍👍
Merci beaucoup
Thank you!!!🙏😇
Do you have any idea where I can get a bobbin for this machine? I have looked everywhere and been unsuccessful.
You can order from Walmart.com
THANK YOU!!!
Hi thank you so much for this video..you are a life saver and you d be a hero if you show us how to thread the machine because i have some trouble with the vertical loop can t pass it through..i have a futura 1100. Thank you so much!!
I am having trouble finding a video on how to thread the machine. Do you have a video for that? It said I could find it at 1.37 of this video. But it's not here.
My machine is not winding on the bobbin but underneath it?
Thank you that was really helpful
Do you know where I can find a bobbin for my 1036
I need a few myself.
Jazzyj43 I found Sewing parts online.com for the 181551 bobbins. I just order 3 packs of 10 for 6.74. Phone # is 888-824-1192. Amanda, the sales rep told me they are out and it will be 4 to 6 weeks to get and then send to me. Good luck.
How do I thred the singer model900
Hi Paul, This is the same set up as my Singer Futura 900! It is a great machine
if I haven't messed it up, which I just did. It was working great before I went to
wind the bobbin and forgot to set it back to straight stitch from zigzag.
Now the wheel is jammed and only moves backward.
I'm I right that this is a bobbin case issue? I've got my service manual!
Thanks so much for showing this machine. There aren't many of these slant needle
throats around!
TY for the video. My thread keeps breaking after the bobbin is about 1/4 full maybe. Any troubleshooting comments would be welcome
It's hard to say why the thread is breaking. Always use good quality thread like Gütermann or Mettler polyester. Old thread can be rotten and break easily.
What if the bobbing blade won’t go up? Which is causing the bobbing to not turn.
I'm having the same problem
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
Hi, I have problem with the bobbin latch that the tension is not there any more, so it would not hold the bobbin in the position. Is this because the latch is broken? not sure...
What happens if f the lever isn’t lifting up to catch the thread?
I have Singer Touch-Tronic 2010 when I want to fill a bobbon their are 2 different stitiches I press on that panel as it turns to fill the bobbin the thread breaks off the needle stops going uo & down till its totally filled, is that on just the model I have ? thought this series all worked the same.
You the man
Thank you for this video! I was calling my Singer Sister my Psycho Sister, nothing in the manual I have for my Futura II model 920, says anything about the thread slot. My problem is now that little blade is not rising up in the bobbin case. I don't know if I need a new bobbin case. Does anyone have any ideas on this? Thanks again, GREAT Video!
me podria apoyar yo tengo igual un 920 pero no encuentro el carrete me podria ayudar de como conseguirlo
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
Meguta ver los videos en español
Cómo enebrar la máquina x favor traducción en español
Bonjour, j'ai une machine à coudre futura 2006, le rembobinage de la canette ne fonctionne plus. Le bras sur la gauche avec petite flèche rouge, est ''mou'' plus de clic pour maintenir la canette. Que faire!
Merci pour un conseil
Im just trying to find how to thread the bobbin not wind it... Someone help me...
So so late to the party. What do I do if my center spike doesn't rise and turn the bobbin?!
Hello Paul.... I have a question. My machine does not rise the the part that is supposed to click in the cross of the bobbing from the bottom part. Does this have a easy fix? Thank you for your time.
Hi I am having the same issue did you ever figure it out?
@@caitlinhurley3186 hi… it is because the bottom of the part he mentions is broken. Easy fix but in Canada is expensive and impossible to get. I end up buying it and it was never ship. It is the bobbin winder cam singer #381504. Good luck to you. $19.99 plus shipping from the USA. Like I said I paid for it and never got it.
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
Must little blade is not coming to to turn the bobbin, on Athena 2000
Corazón donde puedo conseguir la bocina o Carrete..soy de colombia
Hola necesito ayuda con mi maquina nadie sabe usarla de donde soy
What if my center doesn’t pop up?
If the blade doesn't rise, it most likely means that the bobbinwinder cam is broken. It's located underneath and is tricky to change out. It's spring loaded and has to be adjusted perfectly in order to work. It has to lift to the correct height and the three positions have to be aligned exactly right to allow the thread to slip into position for the bobbin to catch.
Awesome. Thanks! I read the darn manual and it was not as helpful
I did that and my needle broke
Singer silai machine foot power 1030
Help I have a singer futura 2001 and it's not sewing and the bobbing isn't turning
You may have a broken gear.
Mine doesn't work
Mine doesn’t turn
Favor Legendar em Português Brazil
Hi