Same goes for Canada but we can’t even buy ammo here without gun license. If i made these I’d still need to find the ammo/illegally and usually if u can find somebody selling ammo also has the gun too so...
For people complaining about children watching... Any child who can machine this alone is probably more qualified to have them than a whole bunch of adults. Chill out. Whenever competent machinists go crazy, you get much worse results than a one-shot shooting
What kind of parent let's their kid play with power tools in the garage unsupervised for hours on end? Why wouldn't you be out there with your kid, helping them and teaching them? Building their abilities and knowledge.
Unfortunately I live in the UK and if I tried to make anything that even resembles a firearm I would be facing quite a lengthy prison sentence ( yes I know the UK is a piss ball nanny state ) so that's why I enjoy sitting on the couch watching you making them instead 😊. Well done they look great 👍
@kelvinsparks4651 thank you sir. These are terrible really. But they are typically everyone's first build. We should move on to better projects quickly. Professor Parabellum offers a few examples th-cam.com/users/shortstfABwm7EyIo?feature=share
I’d like to switch the pull back, spring and lever/knob from underneath and on right, used with index. Instead just reverse it, so the pull back, spring and lever/knob to at the top so when holding you could just use your thumb. When holding normally just put thumb down keeps more accurate than trying to switch down with index.
Being a primate, we enjoy the use of opposable thumbs. They enable us to hold objects much better than other mammals. Thst said, they're out numbered. Keep your thumb wrapped around for control. Use your trigger finger to set it off. But that's the fun of it. They're cheap and easy. Make one of each then decide !
@@jimafcarbon4433 just think about it truly picture it. When holding either funGunZzz you dont hold them like a normal gun with fist firmly closed. You must hold them like hitching a ride, thumb pointing up with 4fingers firmly gripped. When using index you compromise grip/aim/control but instead, while holding it like hitching a ride or thumb up, just click with thumb when lowering thumb back down to a make a normal grip. Just simple click while going from thumbs up/hitching a ride to normal gun grip/closed fist. Simply twist it 180 degrees from bottom/right index to top/left thumb...
@ClintonT.Biddle I've made a couple in a few configurations. There's a million ways to improve them. In the end, these are terrible, really. But they are also everyone's first build. We should move on to better projects quickly. Professor Parabellum's PSMSA is a good start. th-cam.com/users/shortstfABwm7EyIo?feature=share
@@alfonsedente9679The comment section was deigned for people/viewers to comment about the video. Its not to comment about comments. TH-cam was also invented to watch/discuss videos so What are you doing reading the comments ? Wasn’t youtube invented to watch videos and discuss? You however seem to read the comments and then comment ? If U got a problem with my comments then why is it okay for your comment ? You’re not even watching the video or commenting about it so Why don’t you take your own advice ?!? At least I’m sharing an actual thought/idea but you only have SHUT UP to offer. Wow what a uniquely creative and incredibly shocking insight you have. You should really try taking your own advice, you hypocrite IdiotStick. Or Try contributing in a constructive or positive way or try taking your own advice, if thats even possible ? Most people who make comments like you haven’t done shit but seem to know all the facts. Did the creator happen to reply or thumbs up your/this comment to me ? He did with mine and we shared some kind words also unlike yourself.
@TITTY556 Thabk you. I buy Redman rifled liners from brownells. They make great barrels for all DIY stuff, even 3d printed designs. Chaszel makes good liners too.
Hi thanks for these, great vids ,why is the firing pin of set and not central did you say you just filed it or used a 4 jaw on your lathe ? and where do you get the 22 liner from ? thanks
22 is rimfire so the firing pin is off set. For something quick and simple, it's easier tho throw a shim in the lathe than it is to swap the chucks. I but the Redman liners from brownells. They're great for all sorts of projects including 3dp builds.
@@nilbog6942 I think they're intrigued by the simplicity of these and intimidated by the thought of ruining somebody's $30k MG. Granted, most are kids.
@@jimafcarbon4433 hear me out. An all polymer version of this, complete with polymer projectiles. Market them to prisoners overseas. Or other areas that have similar circumstances. Completely undetectable once hidden up your ass. Sounds ludicrous I know, but this is at least a quarter million dollar idea.
I see how the spring would stay put in the brass 90, but if the 90 has a curve on the inside like the SS one, what keeps the back of the spring from getting pushed through the 90 and down the handle?
Interesting, and yeah, I can run the tools! What threading are you using for barrel to breach, & head spacing piece, to breach??,,, Thanks!,,Love,,,DUBS,,,,
I used the 1/8nip tap to thread the main body. Then just ran the breech plug in until it bottomed out. The barrel threads all the way to it so finger tight is headspaced.
@@jimafcarbon4433 OK, Understood. I'm thinking a piece of one-eighth p-plug, would be good to build the piece itself?,,, Thanks for your engineering study work!,,,,Love,,,,DUBS,,,,,
There's a million ways to improve these, but in the end, it's better to just move on to a better design. These are terrible really. But they are typically everyone's first build. We should move on to better projects quickly. Professor Parabellum offers a few examples th-cam.com/users/shortstfABwm7EyIo?feature=share
@@jimafcarbon4433 you said it, Thats all it really is bro I just wanted to do atleast one of these kinds of designs before moving onto the professors stuff, I know its a bit more complex.
@jimafcarbon4433 thanks for answering. I couldn't find the name you use here and was gonna ask the same. Badass bro, already followed you on Rumble. Stay safe.🙏🇺🇲🙏🇺🇲
Exactly. I read these negative comments & think, "people cant be this dumb, can they?" Of course this isn't going to be used for self defense! So many stupid comments. Anyways, it makes me think back when I converted a blank shooter into a fully functional .380 with only a drill, dremel, hammer, file & vise. Oh and of course a 2nd hand Bryco 2 3/4" .380 barrel & some JB Weld. Unfortunately I live in NY so i midas well live in Great Britain. Of course I really didn't do any of this. Im just joking.
@@jimafcarbon4433 it's really so fun to do... and when you complete it & it actually works!! The best feeling!! Unfortunately I got into trouble when I was younger (25 years ago) & my rights were taken, plus I live in sovereign new york. I can guarantee Hunter will still have guns after being convicted and that was yesterday, not 25 years ago. Philip Luty said it best.. I forgot what he said, but he said it best! Lol
@@graffics7665 I love those improvised weapons. Simple yet effective. The concept paved the path for the FGC-9. All proving the WWII Liberator a practical tool.
@graffics7665 very few people should lose their rights indefinitely. If they're that dangerous, they shouldn't be on the streets. If they are free to be driving a car in public, a firearm is not more dangerous.
@Letsgetdriftyproductions I cheat. I do it in a lathe, not power tapping, just to keep it straight. Another pice of pipe over the one you are tapping could help
In the US, we just buy them. Outside of the US, most use air rifle barrels or DIY barrels from hydraulic pipe. The rifling can be done with a button (Ukraine and China produce most of them) or 3d print a mandrel to ECM the rifling and chamber. It's amazing what can be done with a battery charger and electrolytes like sodium chloride
Yes. 20 yards at 20 yards. In reality, it's a Redman liner, even 3/4" of rifling should get it to 12" at 20yd. I should rig up a red dot mount for it just to see.
I used a manual mill for this one, but a drill press or drememl tool could certainly get the job done. TH-cam doesn't allow how-to videos for anything firearms related. But there just might be a complete build on Rumble (jfgmfg) of this one in stainless: th-cam.com/users/shortswOQOx2p0zpw?feature=share
@@HAHA_Lace_ a longer 3/8 bolt, with the threads and head cut off of it. TH-cam doesn't allow how-to videos for anything firearms related. Rumble and Odysee respect the 1st and 2nd amendments. There is a complete build video on Rumble (jfgmfg) of this one in stainless th-cam.com/users/shortswOQOx2p0zpw?si=YRdVsKGKnNx0C7HJ
I used long 3/8" bolts. I cut off the head and the part that was threaded. TH-cam doesn't allow how-to videos for anything firearms related. But there just might be a complete build on Rumble (jfgmfg) of this one
@fredvela6994 that's awesome ! Happy to help. TH-cam doesn't allow how-to videos for anything firearms related. But there just might be a complete build on Rumble of this one in stainless: th-cam.com/users/shortswOQOx2p0zpw?feature=share
Same. I had to drill it out for the liner. But without the liner, you'd need a really long piece of pipe to be legal. Excerpt from The ATF says that in order for a pistol to be legal and unregulated(meaning that it won't need to be registered & taxed as an 'any other weapon under the NFA rules), the pistol must have these 3 characteristics: 1. A grip extending at a downward angle from the bore. 2. The barrel must be rifled 'sufficiently to impart a spin on the projectile. 3. The weapon must be designed, built and intended to be fired with one hand.
@@jimafcarbon4433 yeah thats why the barrel is thick i found a pipe that fits i just didnt know the size bc it was laying around but there was no room for a bolt or to load a round maybe just taper it then find a thick pipe to it or something
I'm amazed at the attention these get. These are terrible really. But they are alos everyone's first build. We should move on to better projects quickly. th-cam.com/users/shortstfABwm7EyIo?feature=share
@jimcarbon4433 I feel like you just gave me a new dirtbike. Pure Joy!! Thank you Mr. Carbon. I needed a hobby and this is freshness to life. Are you married? 😘
@odium3510 valid point, but whenever I travel with these, there's 15+ other firearms and silencers in the car. The have all the probable cause they want to make up already.
I buy Redman linersnfrom Brownells. They're excellent quality and pretty affordable. They are commonly used for correcting rusted out bores on 125 year old guns. But they're the go to for 3dp builds too
@@jimafcarbon4433 i appreciate you. Thanks for the motivation! I assemble 80% ar's, but am looking for more of a challange. I have a horrible, unsafe ak 22lr conversion kit that i want to harvest the 22lr chamber/ barrel for a home brew, but want to start off with something like in your vid! Thanks
@stefanmolnapor910 These are terrible really. But they are everyone's first build. We should move on to better projects quickly. Professor Parabellum's Practical Scrap Metal Small Arms series is a GREAT start. One of my personal favorites full DIY builds: th-cam.com/users/shortstfABwm7EyIo?feature=share
Sorry, youtube doesn't allow selling anything like that here nor linking to sites that do. But these are all standard off the shelf plumbing parts in the US. I'm sure there are equivalents available in most countries.
Gordon, rimfire bullets do not have the primer charge in the center like regular bullet have. The primer is what sets off the rest of the gunpowder. They have their primer charge placed inside the cartridge rear flange (the bulgy part at the back of the bullet). For a rimfire bullet to fire, you need to compress that flange part, which squeezes the primer charge, and then that ignites the rest of the gunpowder.
no pinned link to Rumble ? Awesome that you are able to do this on YT in the middle of 2024 with ALL their new rules . but hey , it does have less than a 30rd mag , so they can't strike you on that . Also gives meaning to "1 in the pipe" . Edit : I FOUND IT !!! All things home something smithing . in case YT doesn't like that type of info .
They don't like the links. We'll, they don't like any of it, but they don't allow the links. In some ways, it's amazing we can do this, and in another way, it's amazing people still don't know just how anti-1a and 2a TH-cam is. The illusion of freedom plagued with self-censorship
@@fishdude67 TH-cam doesn't allow how-to videos for anything firearms related. Rumble and Odysee respect the 1st and 2nd amendments. There is a complete build video on my Rumble (jfgmfg) of this one in stainless th-cam.com/users/shortswOQOx2p0zpw?si=YRdVsKGKnNx0C7HJ
@@jimafcarbon4433 and this might be a dumb question but can you tell me what a barrel liner is? does it go inside another barrel? can it act as its own barrel?
@xe042 I buy Redman rifled liners from brownells. They make great barrels for all DIY stuff, even 3d printed designs. Chaszel makes good liners too. And yes, the liner alone can be the barrel.
@@jimafcarbon4433 thank you for the quick response! another thing i forgot to ask (which is also probably another dumb question but i dont know a lot about guns) was would the base of a 22 round fit on top of the liner? basically what im asking is would the whole 22 round just fall through a .22 liner if you put it in? again sorry for the dumb question. im not a gun expert 😂
Stop underestimating what you’re doing. It’s excruciatingly annoying that you’re not supporting yourself when we’re seeing the videos you’ve made. make them because of the people who like them and make it for them because it brings you financial joy. not the egotistical arrogance that you’re fearing., own it. because we appreciate the information
I'd like to think I'm more of a realist than a pessimist. Nothing I've done here or any of the other projects I show are my own designs. Just my take on existing designs. I like to put at least enough effort into them that they aren't embarrassing. But if they were perfect they might seem out of reach to many. I know my videos aren't the best production quality, but that makes them more realistic. I'm not here to convince others I'm better than them. I only hope to inspire others to take on a build of their own. Show them what can be made. Something achievable. Even with simple tools and limited skills. Sure, the finishing touches take a little extra, but patience anyone can make these. Learning the tools and acquiring better tools only speeds up the process. These are the simplest of all DIY designs. A good place to start. The Practical Scrap Metal Small Arms series is a great next step. I hope the videos of my projects convince them to give it a shot !
@@jimafcarbon4433 ….. oh no, somebody killed Kenny again!! Trust me bro, most of the people in the UK would prefer to be shot rather than stabbed and soaked in acid! Anyone in the UK, who thinks that guns are stupid……. is the definition of their argument! most people in the UK have been wishing for firearms since Tony Blair!!! Mass murderer! Who was not only totally delusional. He was also convinced that everybody had weapons of mass destruction……….. It is, alleged by one of his old PAs that he used to dance around the Prime Minister‘s office at number 10 Downing Street singing…. “I-ee -a! I-ee-a! I’m the best king I am, I’m the best king! ,O E,IO……. 0 E,IO……. Satan is my daddy yes he is Satan is my daddy yes I’m a silly little girl!!!” (Toney Blare) (no honestly, I didn’t just make that up!) Yes, quite literally I believe the main reason they aren’t allowing us to have any weapons is because if we had everybody would’ve shot everyone else and Britain would look like …………. A ghost town from The made up old West.!!! Only with real blood!!!🩸
@@jimafcarbon4433knife crime is bad in the UK with the youth n there gangs . We have guns in the UK not easy to get . But if we had American laws there would be a lot of silly kids shooting each other it would be hell
@@jimafcarbon4433 I agree, 100 percent. I thought that was a funny line is all. Some people most likely would get hurt. I have the tools and what I believe to be most of the materials at my job. There's just some of the finer details I need(rifling for instance). I have plenty of firearms experience and would just like to say I built one of my own. As far as I've seen you have a very interesting channel and I enjoy the content. Stay safe.🙏🇺🇸🙏🇺🇸
who you are really teaching this to is kids cause there are no age restrictions on this here. think about it. adults will buy weapons and kids can't buy em yet and there's a reason for that. for every adult here to learn this ten kids are gonna learn it too and likely more than some get hurt or hurt someone else when it goes wrong cause they are kids. I don't agree with showing stuff like this the people capable of doing it safely don't need the instruction the ones that do won't do it correctly anyway cause they don't have professional eyes for it like you do Jim. It may work then need attention later and how are they gonna know? it's not what they do for a living they won't see it
I dont think your channel is for me. Too much gun building and cool fun stuff. I can't stand it. Im gonna report you to the socialists running youtube! But on a serious note, I can't express how much I love and appreciate you encouraging people to get out and build literally ANYTHING. I would very much love to see more handmade products in the world. Ive been contemplating for years now about trying to slightly redesign commercial products to make them easier for most people to make themselves. Either that or rebuild stuff to make it repairable instead of trashable and buy-another-one-able
I like tools almost as much as I like guns. Having the tools and ability to fix and make stuff is becoming a thing of the past. Let's bring it back. Teach people how to use their hands and tools. We get more enjoyment out of using something we made than something we bought.
![[Part 1] รักมาไม่ทันตั้งตัว❤ หนุ่มสาวโสดถูกจับมาแต่งงานกันกะทันหัน แถมเธอยังเป็นหัวหน้าของเขา?!](http://i.ytimg.com/vi/y2pOOMkuFI0/mqdefault.jpg)
Can’t stress how important these videos are, especially for us in Australia 🇦🇺
Half the comments are:
OMG, what if a kid sees this video then makes one!?
The other half are:
We made a bunch of these as kids !
@@jimafcarbon4433..can u make some for bigger calibers ?
Same goes for Canada but we can’t even buy ammo here without gun license. If i made these I’d still need to find the ammo/illegally and usually if u can find somebody selling ammo also has the gun too so...
@@jimafcarbon4433 HAHAHAHAHAHA! My question would be: "SO WHAT if a kid sees it?"
kids have EDC items too.
to your point, never leave home without it or whats in your wallet?@@scapegoat1313
i built a zip22 a couple yrs ago and really wish i had your videos to help me through it it wld have helped a lot yet still works very well
It's always good to have some references when building something. Good or bad.
For people complaining about children watching... Any child who can machine this alone is probably more qualified to have them than a whole bunch of adults. Chill out. Whenever competent machinists go crazy, you get much worse results than a one-shot shooting
What kind of parent let's their kid play with power tools in the garage unsupervised for hours on end? Why wouldn't you be out there with your kid, helping them and teaching them? Building their abilities and knowledge.
Half the comments are:
OMG, what if a kid sees this video then makes one!?
The other half are:
We made a bunch of these as kids !
@@bschneidez 💯
@@jimafcarbon4433I am 15 years old...and I gathering items to make a gun😅😅😅
@@jimafcarbon4433my father lets
Me. I could easily machine this on my lathe
Like Yoda said dude; "A National Treasure, You Are" JCarbon👑🤝
I'm just a guy sharing some projects in hopes of inspiring others.
Great stuff as always my friend
Thank you. These are almost shameful really. But I understand the draw of simplicity.
Thank you for the info. It makes me sad that some people ruin it for the rest of us.
@freddiespencer927 that's why we can't have nice things.
Unfortunately I live in the UK and if I tried to make anything that even resembles a firearm I would be facing quite a lengthy prison sentence ( yes I know the UK is a piss ball nanny state ) so that's why I enjoy sitting on the couch watching you making them instead 😊. Well done they look great 👍
@kelvinsparks4651 thank you sir. These are terrible really. But they are typically everyone's first build. We should move on to better projects quickly. Professor Parabellum offers a few examples
th-cam.com/users/shortstfABwm7EyIo?feature=share
Watching will soon be illegal too 😅
I’d like to switch the pull back, spring and lever/knob from underneath and on right, used with index. Instead just reverse it, so the pull back, spring and lever/knob to at the top so when holding you could just use your thumb. When holding normally just put thumb down keeps more accurate than trying to switch down with index.
Being a primate, we enjoy the use of opposable thumbs. They enable us to hold objects much better than other mammals. Thst said, they're out numbered. Keep your thumb wrapped around for control. Use your trigger finger to set it off. But that's the fun of it. They're cheap and easy. Make one of each then decide !
@@jimafcarbon4433 just think about it truly picture it. When holding either funGunZzz you dont hold them like a normal gun with fist firmly closed.
You must hold them like hitching a ride, thumb pointing up with 4fingers firmly gripped. When using index you compromise grip/aim/control but instead, while holding it like hitching a ride or thumb up, just click with thumb when lowering thumb back down to a make a normal grip.
Just simple click while going from thumbs up/hitching a ride to normal gun grip/closed fist.
Simply twist it 180 degrees from bottom/right index to top/left thumb...
@ClintonT.Biddle I've made a couple in a few configurations. There's a million ways to improve them. In the end, these are terrible, really. But they are also everyone's first build. We should move on to better projects quickly. Professor Parabellum's PSMSA is a good start.
th-cam.com/users/shortstfABwm7EyIo?feature=share
Bru! Dont talk about it, we dont care.
GO DO IT YOURSELF
@@alfonsedente9679The comment section was deigned for people/viewers to comment about the video. Its not to comment about comments. TH-cam was also invented to watch/discuss videos so What are you doing reading the comments ? Wasn’t youtube invented to watch videos and discuss? You however seem to read the comments and then comment ? If U got a problem with my comments then why is it okay for your comment ? You’re not even watching the video or commenting about it so Why don’t you take your own advice ?!? At least I’m sharing an actual thought/idea but you only have SHUT UP to offer. Wow what a uniquely creative and incredibly shocking insight you have. You should really try taking your own advice, you hypocrite IdiotStick. Or Try contributing in a constructive or positive way or try taking your own advice, if thats even possible ? Most people who make comments like you haven’t done shit but seem to know all the facts.
Did the creator happen to reply or thumbs up your/this comment to me ? He did with mine and we shared some kind words also unlike yourself.
That's great! Where or how do you get the rifled inserts?
@TITTY556 Thabk you. I buy Redman rifled liners from brownells. They make great barrels for all DIY stuff, even 3d printed designs. Chaszel makes good liners too.
Hi thanks for these, great vids ,why is the firing pin of set and not central did you say you just filed it or used a 4 jaw on your lathe ? and where do you get the 22 liner from ? thanks
22 is rimfire so the firing pin is off set. For something quick and simple, it's easier tho throw a shim in the lathe than it is to swap the chucks.
I but the Redman liners from brownells. They're great for all sorts of projects including 3dp builds.
"People love shooting them." Truth! They will choose them over machine guns for some weird reason.
I know you're right, I just don't understand it !
Lack of balls presumably
@@nilbog6942 I think they're intrigued by the simplicity of these and intimidated by the thought of ruining somebody's $30k MG. Granted, most are kids.
@@jimafcarbon4433 hear me out. An all polymer version of this, complete with polymer projectiles. Market them to prisoners overseas. Or other areas that have similar circumstances. Completely undetectable once hidden up your ass. Sounds ludicrous I know, but this is at least a quarter million dollar idea.
@@nilbog6942what I see doesn't intimate or the person holding it.
what I can't see interest me more
I see how the spring would stay put in the brass 90, but if the 90 has a curve on the inside like the SS one, what keeps the back of the spring from getting pushed through the 90 and down the handle?
This 90 isn't curved. But the spring is also larger diameter and wouldn't make the turn as easily.
Interesting, and yeah, I can run the tools! What threading are you using for barrel to breach, & head spacing piece, to breach??,,, Thanks!,,Love,,,DUBS,,,,
I used the 1/8nip tap to thread the main body. Then just ran the breech plug in until it bottomed out. The barrel threads all the way to it so finger tight is headspaced.
@@jimafcarbon4433 OK, Understood. I'm thinking a piece of one-eighth p-plug, would be good to build the piece itself?,,, Thanks for your engineering study work!,,,,Love,,,,DUBS,,,,,
The Professor 🤓 at it again 🆒 👍
Always up to something ! Hope you enjoy!
Where can I watch the build, Rumble? Can someone explain, definitely want to see it. Thanks.
Go to Rumble and search for jfgmfg
Did you use a straight pipe thread tap or a taper pipe thread tap?
The taper tap. I prefer the standard straight threads, though. It's more work, but better results.
Nice video bro I keep changing my design but I like how you break it down better
There's a million ways to improve these, but in the end, it's better to just move on to a better design. These are terrible really. But they are typically everyone's first build. We should move on to better projects quickly. Professor Parabellum offers a few examples
th-cam.com/users/shortstfABwm7EyIo?feature=share
@@jimafcarbon4433 you said it, Thats all it really is bro I just wanted to do atleast one of these kinds of designs before moving onto the professors stuff, I know its a bit more complex.
We have to start somewhere. This isn't a bad place to start
Where are you getting the scrap barrel insert? Old 22s?
I buy them new. Redman liners from Brownells. But i do often chop up old barrels or use cut-offs from shortened barrels too
@@jimafcarbon4433 awesome thank you, I'll check em out
u deseverd more than a sub, tysm
@steve2k_fn435 thank you ! 🤓
Where do you get the liner? Only stuff I can find is pretty expensive for what it is.
I buy Redman liners from Brownells. They are great quality and affordable too. The work very well in 3dp builds as well! Chaszel makes good liners too
What size of bit did you use to bore out the 1/8” piece for the .22 liner install?
I use redman liners. 5/16 or 8mm work for them. They should be soldered or epoxy glued in. I'm lazy and press them some times.
What is your rumble ?
JFGMFG aka All Things Home Gunsmithing
@jimafcarbon4433 thanks for answering. I couldn't find the name you use here and was gonna ask the same. Badass bro, already followed you on Rumble. Stay safe.🙏🇺🇲🙏🇺🇲
What is the name for the rumble account? I looked for the same name as here, but couldn't find anything.
It's jfgmfg also in my channel info here.
@@jimafcarbon4433 Haha of course I see it now. I even went and looked at your community section to see if it was there 😂
@DeezyP all good. Happy to help. I need to create a video outro with my other socials
I’m the one thousandth like for the vid I swear on everything that’s cool. Also I like this video for entertainment purposes
@@VanOVon thanks, these are terrible, yet still somehow cool 😎
Exactly. I read these negative comments & think, "people cant be this dumb, can they?" Of course this isn't going to be used for self defense! So many stupid comments. Anyways, it makes me think back when I converted a blank shooter into a fully functional .380 with only a drill, dremel, hammer, file & vise. Oh and of course a 2nd hand Bryco 2 3/4" .380 barrel & some JB Weld. Unfortunately I live in NY so i midas well live in Great Britain. Of course I really didn't do any of this. Im just joking.
The answer is yes, they can be this dumb.
I love all the stories of others DIY improvised weapons.
@@jimafcarbon4433 it's really so fun to do... and when you complete it & it actually works!! The best feeling!! Unfortunately I got into trouble when I was younger (25 years ago) & my rights were taken, plus I live in sovereign new york. I can guarantee Hunter will still have guns after being convicted and that was yesterday, not 25 years ago. Philip Luty said it best.. I forgot what he said, but he said it best! Lol
@@graffics7665 I love those improvised weapons. Simple yet effective. The concept paved the path for the FGC-9. All proving the WWII Liberator a practical tool.
@graffics7665 very few people should lose their rights indefinitely. If they're that dangerous, they shouldn't be on the streets. If they are free to be driving a car in public, a firearm is not more dangerous.
Did you hand tap the 1/8 npt inside the 1/4 pipe? I cant tap far enough
Yes. The bottom of the breech, the part closest to the bolt is smooth. Basically ran out of threads.
@@jimafcarbon4433 gotcha. Thank you! I gotta figure out how to tap far enough and straight enough lol. Keep up the good work!
@Letsgetdriftyproductions I cheat. I do it in a lathe, not power tapping, just to keep it straight. Another pice of pipe over the one you are tapping could help
@@jimafcarbon4433thats what i was thinking. I only have my hands 😅 ill try the other pipe over it and see how it goes
Do I have another site where you can show your the build in more detail
My Rumble is JFGMFG I do have more "how-to" build content there.
Yes yes and yes. How much for one
@@Wild5ive Just go to your local gun, I mean hardware store.
th-cam.com/users/shorts30pkHmGq0bQ?feature=share
How do you make the liner
In the US, we just buy them. Outside of the US, most use air rifle barrels or DIY barrels from hydraulic pipe. The rifling can be done with a button (Ukraine and China produce most of them) or 3d print a mandrel to ECM the rifling and chamber. It's amazing what can be done with a battery charger and electrolytes like sodium chloride
@7:48 A lot of guys spend hours polishing their guns. 💪
I get a laugh out of it when people make some comment about my dirty hands. They don't understand desire, work, motivation and reward
I like it 😂
@@ronaldhall2489 👻🔫
OK thank you
I only post some of my projects here in hopes of inspiring others to take on a build of their own !
Take my money 😂I want one of these
Just go to your local gun, I mean hardware store.
th-cam.com/users/shorts30pkHmGq0bQ?feature=share
What is the moa at twenty yards 😊
Yes. 20 yards at 20 yards. In reality, it's a Redman liner, even 3/4" of rifling should get it to 12" at 20yd. I should rig up a red dot mount for it just to see.
Hello sir,
I would like to know how you made the cut on pipe? I mean the “ejection port”.
Does it require a CNC machine?
I used a manual mill for this one, but a drill press or drememl tool could certainly get the job done.
TH-cam doesn't allow how-to videos for anything firearms related.
But there just might be a complete build on Rumble (jfgmfg) of this one in stainless: th-cam.com/users/shortswOQOx2p0zpw?feature=share
@@jimafcarbon4433 your advice helped me to find the related video, thanks a million sir.
@@pedramshiva awesome! Happy building.
TH-cam, don’t take down my account. Thank you.
Welcome to the 3 letter agency watchlist.
An interesting idea would evolution of that Zip into open bolt semi-auto ( for legal reasons) 😅😅😅
@@hhkk6155 brrrrrr!
Hey what is that peice with the firing pin on it made from?
@@HAHA_Lace_ a longer 3/8 bolt, with the threads and head cut off of it. TH-cam doesn't allow how-to videos for anything firearms related. Rumble and Odysee respect the 1st and 2nd amendments.
There is a complete build video on Rumble (jfgmfg) of this one
in stainless
th-cam.com/users/shortswOQOx2p0zpw?si=YRdVsKGKnNx0C7HJ
@@jimafcarbon4433ok that helps alot thanks!
Happy to help
What size of piping did you use ? 3/8 ??
@renegadeclown8748 the body is 1/4npt and the barrel is 1/8npt
@@jimafcarbon4433 Very cool thank you for responding. And Thank You for sharing your project with us 😎👍👍
@@renegadeclown8748 happy to help. My goal would be to get everyone to take on a build of their own!
Wheir can I get the liner from
I buy Redman liners from Brownells. They are great quality and affordable too. The work very well in 3dp builds as well! Chaszel makes good liners too
Where can I get the liners at@@jimafcarbon4433
Aonde arruma essas peças assim com rosca aonde conpra
I used long 3/8" bolts. I cut off the head and the part that was threaded. TH-cam doesn't allow how-to videos for anything firearms related.
But there just might be a complete build on Rumble (jfgmfg) of this one
My hardware store doesn't have any of those parts. Let me know if you have them all so I can finish building my project!
Just go to your local gun, I mean hardware store.
th-cam.com/users/shorts30pkHmGq0bQ?feature=share
@jimafcarbon4433 Thank you my man!! I appreciate the shopping list! Can't wait to finish my plumbing job.
@fredvela6994 that's awesome ! Happy to help. TH-cam doesn't allow how-to videos for anything firearms related.
But there just might be a complete build on Rumble of this one in stainless: th-cam.com/users/shortswOQOx2p0zpw?feature=share
@jimafcarbon4433 Sweet! I'll go look for it and thanks again!
If used with out the liner what size pipe for the barrel?
Same. I had to drill it out for the liner. But without the liner, you'd need a really long piece of pipe to be legal. Excerpt from
The ATF says that in order for a pistol to be legal
and unregulated(meaning that it won't need to
be registered & taxed as an 'any other weapon
under the NFA rules), the pistol must have these
3 characteristics:
1. A grip extending at a downward angle from
the bore.
2. The barrel must be rifled 'sufficiently to impart
a spin on the projectile.
3. The weapon must be designed, built and
intended to be fired with one hand.
Yes I understand all the rules. I was just asking a hypothetical question. What size pipe would work for a 22 without the liner- like 1/8 of an inch?
@Mjlessleathal 1/8npt is as close AR you're going to get. Black iron, galvanized, brass and stainless are all slightly different.
Yeah I think it's like 5.7 mm
Anyhow, get out there and build something! Lol 😎
👌🤟👍👊
🇺🇲👁🇺🇲❤️🇺🇲👻🇺🇲🔫🇺🇲
Hey brotha how can I find your vids on rumble ???
All Things Home Gunsmithing
I cant even find anything to fit mine gotta find the right pipes my barrel might just be too thick plus its not 22 its bit bigger
Most 1/8"npt pipe will fit a 25acp. Just saying.
@@jimafcarbon4433 what about for 9mm tho i know there pretty similar just different sizes
@@dabgang4200 9mm is a LOT more pressure.
@@jimafcarbon4433 yeah thats why the barrel is thick i found a pipe that fits i just didnt know the size bc it was laying around but there was no room for a bolt or to load a round maybe just taper it then find a thick pipe to it or something
Make a carbon fiber version.
That would make a nice pack rifle.
When ya get it done, we'd love to see the vid
💪🏽🛠️👑
I'm amazed at the attention these get. These are terrible really. But they are alos everyone's first build. We should move on to better projects quickly.
th-cam.com/users/shortstfABwm7EyIo?feature=share
@jimcarbon4433 I feel like you just gave me a new dirtbike. Pure Joy!! Thank you Mr. Carbon. I needed a hobby and this is freshness to life. Are you married? 😘
Check out my Rumble. A little more there. TH-cam is not 2a friendly. And yes. All of us cool guys are taken ! 😎
Where Can I get one.
Just go to your local gun, I mean hardware store.
th-cam.com/users/shorts30pkHmGq0bQ?feature=share
Definitely dont keep these in a gun case in America. It’s considered a single use container and no warrant is needed to open them
@odium3510 valid point, but whenever I travel with these, there's 15+ other firearms and silencers in the car. The have all the probable cause they want to make up already.
It's like a mail in goon that can't be spotted 😅😅😅
@@hhkk6155 🤔
i want to see one you hold like a pen or dagger and can hit release with thumb.
That's the way most are made. But unfortunately, without the 90° "grip" it would be an AOW.
Where do the barrel liners come from?
I buy Redman linersnfrom Brownells. They're excellent quality and pretty affordable. They are commonly used for correcting rusted out bores on 125 year old guns. But they're the go to for 3dp builds too
@@jimafcarbon4433 i appreciate you. Thanks for the motivation! I assemble 80% ar's, but am looking for more of a challange. I have a horrible, unsafe ak 22lr conversion kit that i want to harvest the 22lr chamber/ barrel for a home brew, but want to start off with something like in your vid! Thanks
@stefanmolnapor910 These are terrible really. But they are everyone's first build. We should move on to better projects quickly. Professor Parabellum's Practical Scrap Metal Small Arms series is a GREAT start. One of my personal favorites full DIY builds:
th-cam.com/users/shortstfABwm7EyIo?feature=share
@stefanmolnapor910 my goal here is to get others taking on builds of their own.
@@jimafcarbon4433 I respect, and Thank you for what you do👍
do you sell the ingredients? online shop if there is one. so I can practice studying it. greetings from Indonesia
Sorry, youtube doesn't allow selling anything like that here nor linking to sites that do. But these are all standard off the shelf plumbing parts in the US. I'm sure there are equivalents available in most countries.
why is the firing pin off set?
Rimfire 22lr, not a centerfire cartridge
Gordon, rimfire bullets do not have the primer charge in the center like regular bullet have. The primer is what sets off the rest of the gunpowder. They have their primer charge placed inside the cartridge rear flange (the bulgy part at the back of the bullet). For a rimfire bullet to fire, you need to compress that flange part, which squeezes the primer charge, and then that ignites the rest of the gunpowder.
@@mikewelch3903 thank you !
what are all the peices called?
@@Lai_n Just go to your local gun, I mean hardware store.
th-cam.com/users/shorts30pkHmGq0bQ?feature=share
@@jimafcarbon4433 thankyouuuuu im in australia you dunno how big of a help this is
no pinned link to Rumble ? Awesome that you are able to do this on YT in the middle of 2024 with ALL their new rules . but hey , it does have less than a 30rd mag , so they can't strike you on that . Also gives meaning to "1 in the pipe" . Edit : I FOUND IT !!! All things home something smithing . in case YT doesn't like that type of info .
They don't like the links. We'll, they don't like any of it, but they don't allow the links.
In some ways, it's amazing we can do this, and in another way, it's amazing people still don't know just how anti-1a and 2a TH-cam is. The illusion of freedom plagued with self-censorship
Can I have a list of the parts?
@@fishdude67 Just go to your local gun, I mean hardware store.
th-cam.com/users/shorts30pkHmGq0bQ?feature=share
@@jimafcarbon4433 thank you man i am trying to replicate it for target fun
@@fishdude67 TH-cam doesn't allow how-to videos for anything firearms related. Rumble and Odysee respect the 1st and 2nd amendments.
There is a complete build video on my Rumble (jfgmfg) of this one
in stainless
th-cam.com/users/shortswOQOx2p0zpw?si=YRdVsKGKnNx0C7HJ
@@jimafcarbon4433 thank you I will check it out
Happy building !
I would buy this sooo fast
$15 at your local plumbing supplier and a couple of hours in the garage you can have one too
@@jimafcarbon4433 can you tell me what the names are of all those parts?
@@jimafcarbon4433 and this might be a dumb question but can you tell me what a barrel liner is? does it go inside another barrel? can it act as its own barrel?
@xe042 I buy Redman rifled liners from brownells. They make great barrels for all DIY stuff, even 3d printed designs. Chaszel makes good liners too.
And yes, the liner alone can be the barrel.
@@jimafcarbon4433 thank you for the quick response! another thing i forgot to ask (which is also probably another dumb question but i dont know a lot about guns) was would the base of a 22 round fit on top of the liner? basically what im asking is would the whole 22 round just fall through a .22 liner if you put it in? again sorry for the dumb question. im not a gun expert 😂
How to to build the bullet plz
There are several others who have videos on improvised ammunition. Most are blanks with air rifle pellets or something similar.
@@jimafcarbon4433 tanx
Sorry, that's not one I get into. But youtube doesn't allow how-to videos for anything firearms related
You deffo a plumber bro 😂
Budget pipehitter 🤓
@@jimafcarbon4433 👌
Im trying
TH-cam doesn't allow how-to to videos for anything firearms build related. Sites like Rumble don't prioritize censorship and aren't anti-2a.
ZIP GUNS ARE ILLEGAL IN CALIFORNIA
California is known to the state of California to cause cancer.
Reason 999,999,002 why I don't live in a liberal ish hole.
Everything is illegal in Commiefornia
So phook comifornia 😂
@@hhkk6155 and then some
I will buy it
$15 at your local plumbing supplier and a couple of hours in the garage you can have one too
Have a hardcore femanazi talk on these vids and TH-cam will let it go through on all the vids
@@theartofmgtow4204 use the rules to break the rules !
Can buy it for 300
$15 at your local hardware store, a few hours in the garage and you could have one too!
th-cam.com/users/shorts30pkHmGq0bQ?feature=share
@@jimafcarbon4433 Tanx you just made mah day😘…..Still wanna know how to make the rounds though 😂 (bullets)
@DorisValzquez most people use air rifle pellets and nail gun blanks. Here in the US, we're spoiled. 22 ammo is cheap and readily available
Stop underestimating what you’re doing. It’s excruciatingly annoying that you’re not supporting yourself when we’re seeing the videos you’ve made. make them because of the people who like them and make it for them because it brings you financial joy. not the egotistical arrogance that you’re fearing., own it. because we appreciate the information
I'd like to think I'm more of a realist than a pessimist. Nothing I've done here or any of the other projects I show are my own designs. Just my take on existing designs. I like to put at least enough effort into them that they aren't embarrassing. But if they were perfect they might seem out of reach to many. I know my videos aren't the best production quality, but that makes them more realistic. I'm not here to convince others I'm better than them. I only hope to inspire others to take on a build of their own. Show them what can be made. Something achievable. Even with simple tools and limited skills. Sure, the finishing touches take a little extra, but patience anyone can make these. Learning the tools and acquiring better tools only speeds up the process. These are the simplest of all DIY designs. A good place to start. The Practical Scrap Metal Small Arms series is a great next step. I hope the videos of my projects convince them to give it a shot !
Guns are ……cooooool!
Oh noooooo! Somebody killed Kenny! Again!
Cartman !
@@magnetmountain33 he had it coming
But he’s Canadian😂
Oh no, he isn’t Izzy, because if he was his head would fly off😂
Oh bro…….. and it should be guns are bad!! 😂 but only really satirically😂
Sell me one to send overseas
$15 at your local plumbing supplier and a couple of hours in the garage you can have one too
What’s your rumble?
On Rumble, jfgmfg
@@jimafcarbon4433 thank you sir
U.S. has this ability because of the Second Amendment.
There's no other country that comes close to the armorment or the access to guns like America.
More.guns than people. But not twice as many, yet.
@jimafcarbon4433 oh, I know.
I'm one person with more than 1 myself. Lol
@@2dogsmowing 🇺🇲👁❤️👻🔫🇺🇲
The uk 😂 and I have already been told I can’t commit any more free speech crimes or thought crimes today 😢
Half the UK thinks "Stupid Americans and their guns" is an insult, the other half says it out of envy.
@@jimafcarbon4433 ….. oh no, somebody killed Kenny again!! Trust me bro, most of the people in the UK would prefer to be shot rather than stabbed and soaked in acid! Anyone in the UK, who thinks that guns are stupid……. is the definition of their argument! most people in the UK have been wishing for firearms since Tony Blair!!! Mass murderer! Who was not only totally delusional. He was also convinced that everybody had weapons of mass destruction……….. It is, alleged by one of his old PAs that he used to dance around the Prime Minister‘s office at number 10 Downing Street singing….
“I-ee -a! I-ee-a! I’m the best king I am, I’m the best king! ,O E,IO……. 0 E,IO……. Satan is my daddy yes he is Satan is my daddy yes I’m a silly little girl!!!” (Toney Blare) (no honestly, I didn’t just make that up!)
Yes, quite literally I believe the main reason they aren’t allowing us to have any weapons is because if we had everybody would’ve shot everyone else and Britain would look like …………. A ghost town from The made up old West.!!! Only with real blood!!!🩸
@@jimafcarbon4433knife crime is bad in the UK with the youth n there gangs . We have guns in the UK not easy to get . But if we had American laws there would be a lot of silly kids shooting each other it would be hell
@Pgtips1o1 let em. Self-solving problem. Attitudes are a little different when everyone is armed.
Well if I want to build something and then I get caught with it then that's why I'm a dumb ass I guess.
Look I'm capable of going what ever I fucken want. And AND if you don't like it then tough shit.
And people do. I'm only "suggesting" that if you're going to make one, to do it legally
If you can't make it, you probably can't use it😂🙏🇺🇲🙏🇺🇲
If this would be a struggle for you to build, you'll probably hurt yourself trying.
@@jimafcarbon4433 I agree, 100 percent. I thought that was a funny line is all. Some people most likely would get hurt. I have the tools and what I believe to be most of the materials at my job. There's just some of the finer details I need(rifling for instance). I have plenty of firearms experience and would just like to say I built one of my own. As far as I've seen you have a very interesting channel and I enjoy the content. Stay safe.🙏🇺🇸🙏🇺🇸
who you are really teaching this to is kids cause there are no age restrictions on this here. think about it. adults will buy weapons and kids can't buy em yet and there's a reason for that. for every adult here to learn this ten kids are gonna learn it too and likely more than some get hurt or hurt someone else when it goes wrong cause they are kids. I don't agree with showing stuff like this the people capable of doing it safely don't need the instruction the ones that do won't do it correctly anyway cause they don't have professional eyes for it like you do Jim. It may work then need attention later and how are they gonna know? it's not what they do for a living they won't see it
Half the comments are:
OMG, what if a kid sees this video then makes one!?
The other half are:
We made a bunch of these as kids !
I dont think your channel is for me. Too much gun building and cool fun stuff. I can't stand it. Im gonna report you to the socialists running youtube!
But on a serious note, I can't express how much I love and appreciate you encouraging people to get out and build literally ANYTHING. I would very much love to see more handmade products in the world. Ive been contemplating for years now about trying to slightly redesign commercial products to make them easier for most people to make themselves. Either that or rebuild stuff to make it repairable instead of trashable and buy-another-one-able
I like tools almost as much as I like guns. Having the tools and ability to fix and make stuff is becoming a thing of the past. Let's bring it back. Teach people how to use their hands and tools. We get more enjoyment out of using something we made than something we bought.