Thank you brother , unfortunately had to trade it in for more stuff for the channel, it all comes out of my own pockets lol 😂 .. really appreciate your support!
Good stuff! New subscriber! I would like a PCC. I shot the Ruger PC Carbine 9mm, but even though I was accurate with it, it seemed to be a heavy weapon. I would like something less than that Ruger that was over 7 lbs.
@@joegilbert7661 I wanted to take the time to say thank you for stopping by! And welcome! And for subscribing and for leaving a comment truly appreciated your support! Means a lot to a small channel like mine ! With that said I agree with you I did try the Ruger Pc and I would agree it’s a little on the heavier side! Great firearm just a little on the heavy.. I’m going to have to rebuild one myself one day , I loved it but had to trade it in so I could get more content for the channel.. hope you have a great day Rod
Honestly haven’t had the chance to shoot one.. but if it’s anything like what I was able to get my hands on.. honestly with FM I loved it when I had it !
What brace is that? Sick build it looks amazing. How much did this setup cost you all together if you don’t mind me asking? I’m looking to buy a 9mm pistol and I think i’m going with this setup. Just trying to decide if it’s worth it to buy the stripped lower and build it or buy a complete lower
Hey there, that is an SB tactical.. HBPDW.. when it comes to the price it really just depends, I spending sometime hunting down sale prices for a while before this build was done took me a almost 2 years to build it.. Best places I found was OpticsPlanet and primary arms.. now for the SP tactical brace I ended up having to go to modern warriors layaway program accessories.. I ended up going with foxtrot Mike upper and lower.. FTM does state it does not like short stocks due to most short stock weight being off for proper blowback operation.. but the SP tactical is actually right on the money! When it comes to the trigger, PSA makes one bad mama jam trigger!! Hope that helps and I appreciate your feedback and support..
@@josue4784 and I would go with stripped lower one is cheaper, and two you can put whatever you want on it case in point in Magpul select switch 45 degree.. the PSA trigger .. and that should save you some money that way..
@@Chingus696 I can tell you I emailed PSA a while back and when they talk to me about it, they told me that it is for PCC specifically their PCC I took a chance because of the price it was like 80 bucks at the time and it worked outstanding…
@@IROD808 FM doesnt recommend AR15 drop in triggers on their lowers. They state that PCC specific triggers are recommended. So now I dont know what to do. I have the PSA 3.5 and its so crisp and clean on my AR15. But it worked on your AR9… do you have the model number or SKU of the PSA trigger? Just to make sure its the same one I got…
@ give me a second and I’ll look for it. It should be in my order history. For what it’s worth brother it worked without a problem. In fact I had tried another trigger that was causing a problem from rise and when I put in the PSA fixed it right up.. FM also stated that you need to use a full buffer tube, and typically when 9 mm you do, but honestly man I used the SB tactical brace system and with the modifications they did to their system to allow compatibility with the 9mm blowback system I had absolutely no issues..
I’ve been thinking of pulling the trigger on this brace I’ve found it on psa a few time for 299 with there lower as well. How are you liking the brace long term? Ps idk you did bodybuilding that’s always been a dream of mine last year I was the biggest I ever was weighing around 215 after training. I just felt like shit looked awesome but my body doesn’t like the weight. We just moved and I’m about to get back in for the winter bulk
@@Jus10worsT brother I love it ! Honestly I plan to get another one for another build when I can! Worth every penny!!! That’s awesome brother ! Yes sir did it from 16-31 .. and now just keep myself at 200-225 at 44 years old lol !! Love to workout 🏋️ I’ll be gaining weight off season I’m at 210 going to 225/230 …
@@IROD808 me too bro there’s just something about pumping iron that makes me at peace. But in order for me to get big I have to retain water 😉 and I’m not for the raise in blood pressure anymore. So when I get back to it I probably want go for such a drastic change from what I am now if I can put 10 pounds on before march I’ll be happy. Keep up the great work bro
@Jus10worsT you to my brother ! I’m like you man removes every ounce of stress that I have in the day! Makes a happy person lol !! It’s such a part of my life and my wife’s it would feel weird not working out lol honestly brother it does you know good to put all this size on and your heart is paying for it ! Like you said the goal is health not just look !
@@F.L.4. hey there thank you for leaving a comment, and stopping by my page. Yes, it’s 5 inches. I love the way it shot. I trading it in so I could get the Springfield Echelon for review that I’ve posted videos on as well.
@@TexasCorgiGun first let me say thank you for the support and for stopping by and viewing the review means a lot and thank you.. I had it for a short time due to having to sell it to get more firearms to review on my channel being a small channel had to do it ! I don’t have the big dollars as they would say lol … It’s actually one of my regret. I loved it. Never had an issue shot great! felt great!
@@TexasCorgiGun truly my pleasure, I love being able to help people. It means a lot to me Our community is important. I truly appreciate you and thank you for your support it means tons ! I hope to prove more to you guys ! Trying
@@DesertTactical yeah man I hated to but being a small channel it all comes out of the pockets sooo lol 😂 needed more content for the channel.,, do plan to build another one
@@jamesduncan4676 I loveeeeee Dead 💀 Air .. they make the Wolfman not cheap but badass!and I truly appreciate your support! Thank you for stopping by and also for subscribing
@@Beardedbiker6947 primary arms, the lower stripped , the upper came with a BCG and also charging handle, I replaced the charging handle with a radian charging handle.. upper came from opticsplant , Magpul hand stop, bravo company pistol grip, all came from optics..sb tactical HBPDW brace came from modern warrior they had a layaway program.. the safety switch came from AT3 Tactical Magpul ESK selector AR.. hope this helps
@ unfortunately I do not have another way at this moment.. but I can create the links here for you and you can copy and paste if they don’t allow to you directly to it … Lower www.primaryarms.com/fm-products-dedicated-9mm-ar-lower-stripped-billet Upper www.opticsplanet.com/fm-products-fm-9-ar-9mm-rear-charging-upper-receiver-5-inch-w-blast-diffuser.html?_iv_code=3JR-URC-FRC9R5D-FM9U-R55-B Radian Charging Handle www.opticsplanet.com/radian-weapons-raptor-lt-ambidextrous-charging-handle-for-ar15-m16.html?_iv_code=RDW-CGH-RLTCHFIF-R0148 Grip www.opticsplanet.com/bcm-gfgmod-3-blk-pistol-grip-mod-3.html?_iv_code=BCM-G6-EDCX-GFGMOD-3-BLK Magpul safety www.at3tactical.com/products/magpul-enhanced-selector-kit-ar15-ambi-safety Looks like the Sb Tactical brace isn’t available Trigger palmettostatearmory.com/psa-custom-ar-3-5-lbs-match-grade-drop-in-trigger-flat-116055.html Hope this helps brother
I first wanted too say thank you for your comment and your feedback. I appreciate it and understand where you are coming from a blowback system requires a heavier, buffer, and a longer tube to create proper blowback system operation, I opted for this pistol brace from SB tactical for two reasons one it it gives me the opportunity to store it in a backpack the way I would like to. Two everything I have read and seen it is compatible with AR 9 mm blowback systems. The buffer itself is 7.5 ounces typical buffer weight for 9 mm blowback systems 5.5 ounces, the rear of the buffer is not a standard rear. It’s a bigger size rear. Which should help with proper feeding and extracting of the rounds. It also has Tungsten weight inside of the actual buffer. But when it comes to reviewing items sometimes what you hope for you may not get or you may I won’t know until I take it to the range and know for sure, sometimes you have to roll the dice and see what you like or don’t like…. 👍🏼 thank you again and have a great day. Appreciate all the feedback.
@unreal5143 I used one for my 300 blackout I had and loved it , I think kynshot makes a great product! I have looked into the FM-9 and even thinking about the new PSA one for my next one..how do you like your FM-9? I appreciate your feedback! Hope you are having a great day !
I love mine I did need to adjust the ejector to get it to eject 100%. I had my local gunsmith drill and tap a brass deflector. I'm a lefty and I need it otherwise I'm taking powder to the face.
@unreal5143 that makes all the sense in the world 🌎! Looking forward to getting one in my hands.. 🙌 I really enjoy being to shoot 9mm on an AR platform!
Nice setup! Keep us updated when you get your optic, sling, and backup sights. 😎👍🏼🇺🇸
Thank you brother , unfortunately had to trade it in for more stuff for the channel, it all comes out of my own pockets lol 😂 .. really appreciate your support!
Good stuff! New subscriber! I would like a PCC. I shot the Ruger PC Carbine 9mm, but even though I was accurate with it, it seemed to be a heavy weapon. I would like something less than that Ruger that was over 7 lbs.
@@joegilbert7661 I wanted to take the time to say thank you for stopping by! And welcome! And for subscribing and for leaving a comment truly appreciated your support! Means a lot to a small channel like mine ! With that said I agree with you I did try the Ruger Pc and I would agree it’s a little on the heavier side! Great firearm just a little on the heavy.. I’m going to have to rebuild one myself one day , I loved it but had to trade it in so I could get more content for the channel.. hope you have a great day
Rod
what do you think about the other-Mike9-
FM PRODUCTS MIKE9 AMBI 7'' REAR CHARGE PISTOL
Honestly haven’t had the chance to shoot one.. but if it’s anything like what I was able to get my hands on.. honestly with FM I loved it when I had it !
What brace is that? Sick build it looks amazing. How much did this setup cost you all together if you don’t mind me asking? I’m looking to buy a 9mm pistol and I think i’m going with this setup. Just trying to decide if it’s worth it to buy the stripped lower and build it or buy a complete lower
Hey there, that is an SB tactical.. HBPDW.. when it comes to the price it really just depends, I spending sometime hunting down sale prices for a while before this build was done took me a almost 2 years to build it.. Best places I found was OpticsPlanet and primary arms.. now for the SP tactical brace I ended up having to go to modern warriors layaway program accessories.. I ended up going with foxtrot Mike upper and lower.. FTM does state it does not like short stocks due to most short stock weight being off for proper blowback operation.. but the SP tactical is actually right on the money! When it comes to the trigger, PSA makes one bad mama jam trigger!! Hope that helps and I appreciate your feedback and support..
@@josue4784 and I would go with stripped lower one is cheaper, and two you can put whatever you want on it case in point in Magpul select switch 45 degree.. the PSA trigger .. and that should save you some money that way..
Thanks for the info much appreciated. Yes primary arms is my number one website 🤙🏻
Anytime my pleasure ! If you need anything just let me know.. have a blessed night
@@IROD808 I appreciate it and likewise to you
Is that PSA trigger specifically for a PCC? FM says it needs to be…
@@Chingus696 I can tell you I emailed PSA a while back and when they talk to me about it, they told me that it is for PCC specifically their PCC I took a chance because of the price it was like 80 bucks at the time and it worked outstanding…
@@IROD808the PSA 3.5 Match trigger? I have it one an AR and its super nice. I was wondering the same, if it would work on a AR-9.
@@DesertTactical yes sir for what it’s worth before I sold it , it was amazing
@@IROD808 FM doesnt recommend AR15 drop in triggers on their lowers. They state that PCC specific triggers are recommended. So now I dont know what to do. I have the PSA 3.5 and its so crisp and clean on my AR15. But it worked on your AR9… do you have the model number or SKU of the PSA trigger? Just to make sure its the same one I got…
@ give me a second and I’ll look for it. It should be in my order history. For what it’s worth brother it worked without a problem. In fact I had tried another trigger that was causing a problem from rise and when I put in the PSA fixed it right up.. FM also stated that you need to use a full buffer tube, and typically when 9 mm you do, but honestly man I used the SB tactical brace system and with the modifications they did to their system to allow compatibility with the 9mm blowback system I had absolutely no issues..
I’ve been thinking of pulling the trigger on this brace I’ve found it on psa a few time for 299 with there lower as well. How are you liking the brace long term? Ps idk you did bodybuilding that’s always been a dream of mine last year I was the biggest I ever was weighing around 215 after training. I just felt like shit looked awesome but my body doesn’t like the weight. We just moved and I’m about to get back in for the winter bulk
@@Jus10worsT brother I love it ! Honestly I plan to get another one for another build when I can! Worth every penny!!! That’s awesome brother ! Yes sir did it from 16-31 .. and now just keep myself at 200-225 at 44 years old lol !! Love to workout 🏋️ I’ll be gaining weight off season I’m at 210 going to 225/230 …
@@IROD808 me too bro there’s just something about pumping iron that makes me at peace. But in order for me to get big I have to retain water 😉 and I’m not for the raise in blood pressure anymore. So when I get back to it I probably want go for such a drastic change from what I am now if I can put 10 pounds on before march I’ll be happy. Keep up the great work bro
@Jus10worsT you to my brother ! I’m like you man removes every ounce of stress that I have in the day! Makes a happy person lol !! It’s such a part of my life and my wife’s it would feel weird not working out lol honestly brother it does you know good to put all this size on and your heart is paying for it ! Like you said the goal is health not just look !
5 inch barrel?
@@F.L.4. hey there thank you for leaving a comment, and stopping by my page. Yes, it’s 5 inches. I love the way it shot. I trading it in so I could get the Springfield Echelon for review that I’ve posted videos on as well.
Hello, any issues since you had it ? Thanks for the video.
@@TexasCorgiGun first let me say thank you for the support and for stopping by and viewing the review means a lot and thank you..
I had it for a short time due to having to sell it to get more firearms to review on my channel being a small channel had to do it ! I don’t have the big dollars as they would say lol … It’s actually one of my regret. I loved it. Never had an issue shot great! felt great!
@IROD808 Thank you so much for the insight, I really appreciated that, following.
@@TexasCorgiGun truly my pleasure, I love being able to help people. It means a lot to me Our community is important. I truly appreciate you and thank you for your support it means tons ! I hope to prove more to you guys ! Trying
@@IROD808oooh you sold it!!! :(
@@DesertTactical yeah man I hated to but being a small channel it all comes out of the pockets sooo lol 😂 needed more content for the channel.,, do plan to build another one
Looking for a suppressor for my ar9
Any help is welcome.
@@jamesduncan4676 I loveeeeee Dead 💀 Air .. they make the Wolfman not cheap but badass!and I truly appreciate your support! Thank you for stopping by and also for subscribing
Nice build, what is the total cost?
@@Zombie34343 depending on sales between 800 to 950 . Thank you brother for the support..
@@IROD808 yeah, love the content, keep it up!
@Zombie34343 thank for the support truly mean a lot and I appreciate you ! I’m trying hard to get more for you all ! 2A Community!!!
Do you have a parts list
I’ll create one for you give me a couple days and I’ll get it together for you
@@Beardedbiker6947 primary arms, the lower stripped , the upper came with a BCG and also charging handle, I replaced the charging handle with a radian charging handle.. upper came from opticsplant , Magpul hand stop, bravo company pistol grip, all came from optics..sb tactical HBPDW brace came from modern warrior they had a layaway program.. the safety switch came from AT3 Tactical Magpul ESK selector AR.. hope this helps
Anyway you could reach out to me another way so you could send me links
@ unfortunately I do not have another way at this moment.. but I can create the links here for you and you can copy and paste if they don’t allow to you directly to it …
Lower
www.primaryarms.com/fm-products-dedicated-9mm-ar-lower-stripped-billet
Upper
www.opticsplanet.com/fm-products-fm-9-ar-9mm-rear-charging-upper-receiver-5-inch-w-blast-diffuser.html?_iv_code=3JR-URC-FRC9R5D-FM9U-R55-B
Radian Charging Handle
www.opticsplanet.com/radian-weapons-raptor-lt-ambidextrous-charging-handle-for-ar15-m16.html?_iv_code=RDW-CGH-RLTCHFIF-R0148
Grip
www.opticsplanet.com/bcm-gfgmod-3-blk-pistol-grip-mod-3.html?_iv_code=BCM-G6-EDCX-GFGMOD-3-BLK
Magpul safety
www.at3tactical.com/products/magpul-enhanced-selector-kit-ar15-ambi-safety
Looks like the Sb Tactical brace isn’t available
Trigger
palmettostatearmory.com/psa-custom-ar-3-5-lbs-match-grade-drop-in-trigger-flat-116055.html
Hope this helps brother
@@IROD808 what about what I would need for tbd hand stop
Shorty buffer tube on a 9mm is stupid. You need a standard length buffer tube on a blowback gun.
I first wanted too say thank you for your comment and your feedback. I appreciate it and understand where you are coming from a blowback system requires a heavier, buffer, and a longer tube to create proper blowback system operation, I opted for this pistol brace from SB tactical for two reasons one it it gives me the opportunity to store it in a backpack the way I would like to. Two everything I have read and seen it is compatible with AR 9 mm blowback systems. The buffer itself is 7.5 ounces typical buffer weight for 9 mm blowback systems 5.5 ounces, the rear of the buffer is not a standard rear. It’s a bigger size rear. Which should help with proper feeding and extracting of the rounds. It also has Tungsten weight inside of the actual buffer. But when it comes to reviewing items sometimes what you hope for you may not get or you may I won’t know until I take it to the range and know for sure, sometimes you have to roll the dice and see what you like or don’t like…. 👍🏼 thank you again and have a great day. Appreciate all the feedback.
@@IROD808 i just put the kynshot buffer with a carbine flat spring and one kynshot buffer weight in my FM-9. Cut the recoil impulse in half.
@unreal5143 I used one for my 300 blackout I had and loved it , I think kynshot makes a great product! I have looked into the FM-9 and even thinking about the new PSA one for my next one..how do you like your FM-9? I appreciate your feedback! Hope you are having a great day !
I love mine I did need to adjust the ejector to get it to eject 100%. I had my local gunsmith drill and tap a brass deflector. I'm a lefty and I need it otherwise I'm taking powder to the face.
@unreal5143 that makes all the sense in the world 🌎! Looking forward to getting one in my hands.. 🙌 I really enjoy being to shoot 9mm on an AR platform!