Man I wish I had someone to work with. Grew up and no one in my family was into working on cars. Im in my 30s now and Im out there tinkering with just basic oil changes and cabin air filters and tubes up. But nothing of this magnitude. It came out great. Awesome job. ❤
Lonestar, i enjoyed watching this video i have a 01 lincoln town car i was up in the air about going back to what i used to do was lowride. Thank you for inspiring and helping me make up my mind. Big D .... UNDERWORLD cc
Unfortunately you do have to count the wire wheels in the budget but that's a pretty damn affordable build for a build that's also done correctly and overall just a beautiful beautiful car...... That's the best $700 paint job on the planet too lol..... Outstanding!!!
Clean car! Man I'm jealous. I jumped into a budget lowrider. I didn't do the right research. Ended up getting a 2003 town car. Got the whole thing cut got a 3 pump hoppos kit. went for reinforcement and was told I got the worst year lol. Im Still building it. I dont have the money for a frame swap so ill use what I have and I'll see how it goes.
i always use stock coils in the rear… in my 97 i had pre cut 2 tons up front and i cut a single stock front and used them in the rears with reverse deep cups… loved the ride, super smooth, i used to ride from abilene to dallas all the time, odessa, you name it, hell i rode to cali n back once, loved it…
Great idea for the hold down. Use what you have on hand and avoid a hour trip out. No 60's for sale at the Syracuse Nationals. Perfect on Friday and rain ALL dat Sat and Sunday. Looks very good on the Ground :-)
Thank you for documenting this! I was planning on doing a similar setup in my 2000 town car. It’s my daily driver/commuter (60+ miles round trip). How’s the ride on the freeway with the front one ton precuts and factory front cut springs (coil over setup) out back?? I might go OG with coil under out back to have another turn or two on the rear coils for a little more cushion.
Hey Omar, I don’t recommend the OG spring location on the back. They move a lot and the tend to fall out. Go with power balls and get some half ton coils smooth ride. If you can get accumulators that will help the ride smooth out. If your looking at sitting low get recessed cups too .
Coilovers are good and unless you're running a shock it will actually ride smoother with less bouncing with the cut coils from the front than the full stack.
El Camino is up in price because of the lowrider aspect of it and that was my back up when the Impala and Monte Carlo isn't in reasonable price for me. Any cars you know of that look like a Monte Carlo but cheaper?
Can I do a minor frame wrap around the front frame wheel well as well as the uc arms and lc arms as well as rear frame wheel wells and some on axle....will this budget way of frame wrapping help my car from binding ? Any relays bk would help. Thanks and great videos bro!
Budget build are always the best because you find out more of yourself as a builder. If I heard right $7800 on the build. That way cheaper Then what I have in my caddy and I don’t have hydros. Great video bro
@@lonestarlows I try to fit 5 lug baby moons on my 26 grand marquis but the stud post was to big to fit on wheel is there anything I can do to fit them
What Model Is The Lincoln? I'm Sorry I'm New To tha channel, and growing up , tha 63 Impala and Monte Carlo had always been my dream car, but looking up some hydraulic vids, came across this one, and this might js be another on of my dream cars !!❤
Question? Im looking to build one myself but i live in cali. How is the car on gas milage? How much does it take to fill up the tank and how long does it last?
Great job! I see you are in Texas. I have a ford ranger I would like to install hydraulics. Checking to see whats your location and possibly work on my truck with the install etc?
Love the video my man! Appreciate the time you took to give us the tutorial. Question. I just bought my 03 Lincoln town car Cartier. My passenger seat is broke and they said they don’t make the parts anymore. Any info on getting my hands on a new seat?
super clean… if you wanted trunk space, would it not have been better to utilize the sides for the batteries, even if you left the pumps where they were…??? would’ve gave you the whole center for ice chest, chairs m whatnot…
Everyone says you can use trans fluid for hydraulic pump I say that doesn't sound right. You're the first one I herd say trans fluid swells up the O-rings. Thanks for saying that. Like the paint job and suspension work you did on it. She's a keeper.
In this video we wrapped up the install on the lincoln. Discussion of parts used and costs to build the lincoln
Nice work brother! 😎
Thanks for watching 👀
Are you gonna sale the Lincoln?
No
How much for you to build me one I got the same car
Man I wish I had someone to work with. Grew up and no one in my family was into working on cars. Im in my 30s now and Im out there tinkering with just basic oil changes and cabin air filters and tubes up. But nothing of this magnitude. It came out great. Awesome job. ❤
Never too late to start...
It's about a $9,000 car that looks like a million bucks!!!!!! Tesla who?????? No thanks!!! Il take this build over that any day!!!!❤❤❤❤❤❤
😄
Lonestar, i enjoyed watching this video i have a 01 lincoln town car i was up in the air about going back to what i used to do was lowride. Thank you for inspiring and helping me make up my mind. Big D .... UNDERWORLD cc
😎😎😎
Super clean ass whip I flipping love the color choice great job one love
Thanks
Not gonna lie I thought the same thing, that color is really really nice!
Thanks. 😎
Unfortunately you do have to count the wire wheels in the budget but that's a pretty damn affordable build for a build that's also done correctly and overall just a beautiful beautiful car...... That's the best $700 paint job on the planet too lol..... Outstanding!!!
Thanks
Looks Amazing 👍 always appreciate the knowledge and tips
Thanks for watching
I had an 87 Lincoln towncar , dark blue with a light blue top, loved that car
😎
Nice, reminds me of mine. Almost very similar. I had golds on my mine matched the ghost patterns i put on it.
Clean car! Man I'm jealous. I jumped into a budget lowrider. I didn't do the right research. Ended up getting a 2003 town car. Got the whole thing cut got a 3 pump hoppos kit. went for reinforcement and was told I got the worst year lol. Im Still building it. I dont have the money for a frame swap so ill use what I have and I'll see how it goes.
Yeah 03+ has different frame
2003 was the best year for that body style because it was the last year of the Cartier
Super clean bro!! Looking good 👍🏼
i always use stock coils in the rear… in my 97 i had pre cut 2 tons up front and i cut a single stock front and used them in the rears with reverse deep cups… loved the ride, super smooth, i used to ride from abilene to dallas all the time, odessa, you name it, hell i rode to cali n back once, loved it…
I think I'd like 14s better than 13 on this car
@@lonestarlows if it’s a daily, probably…
@@RALPHD099 it's not so much a daily, but I live right off the highway so any time I drive it, its 65mph , there is no city cruising around here
Nice daily driver to cruise around in!! 🤘🏽
Great video! Quick question 🤔 how do you choose the right coils?
Nice ride and video bro thanks for sharing 💯🤙
What parts did you use to go with 13 I have an 2003 with 14 but like to go with 13
That’s a beautiful Daily driver lowrider. Love it
Love those Roadstars!! Classic💯👌🏽👌🏽
yessir.
Great idea for the hold down.
Use what you have on hand and avoid a hour trip out.
No 60's for sale at the Syracuse Nationals.
Perfect on Friday and rain ALL dat Sat and Sunday.
Looks very good on the Ground :-)
Thanks Ed.
Bad @$$ nice work can't wait to see another video
Soon
Bro! That’s a clean little street roller ✊🏼
thats incredible man...well done! i love it
Thank you
Hey man I'm picking up the exact same Lincoln on Saturday and where do I find chrome 100 spoke wire 13x7 wheels and hydraulics?
theres alot of vendors on IG, ebay as well if you dont have something local
How long do your batteries stay charged ? Or better yet how often do you need to charge before it gets weak
I charge every few months
Thank you for documenting this! I was planning on doing a similar setup in my 2000 town car. It’s my daily driver/commuter (60+ miles round trip). How’s the ride on the freeway with the front one ton precuts and factory front cut springs (coil over setup) out back??
I might go OG with coil under out back to have another turn or two on the rear coils for a little more cushion.
Rides good. I live way out from city limits everything is highway out here
Hey Omar,
I don’t recommend the OG spring location on the back. They move a lot and the tend to fall out. Go with power balls and get some half ton coils smooth ride. If you can get accumulators that will help the ride smooth out. If your looking at sitting low get recessed cups too .
@@josetrejo6256 thanks for the heads up!
Coilovers are good and unless you're running a shock it will actually ride smoother with less bouncing with the cut coils from the front than the full stack.
Why did you switch to the 13 did the fourteens stick out at all???
Reminds me of the first set up In reality checc but I ran 6 batts. Looks great brother keep killing it brother.. 👍🔥
Thanks. I've ran hardlines since 2002. This is my first setup with hoses since then. Kinda miss them lol
@@lonestarlows looks great even with out the hardline
Very nice . Great work .😊
Is the budget build tc for sale? Came out bad AF
@@JesseJames-y1t sold it about a month ago
How it going. So I have a question. I have a 1999 town car and thinking of putting 13. What do I need to meek them fit
spindle swap
What was the budget?
👍Even us humble ones need 2 keep the culture alive
Hella clean I have the same Lincoln year and color, kinda how I wanna do mine simple but clean… love the videos out here in AZ!!!!
Nice. I've always liked this factory pearl colors its just screams luxury
Nice. I've always liked this factory pearl colors its just screams luxury
Is there a video showing us what the nice-looking car does?
no...car kind of sits in the garage lol
just wanted to see it hop up and down@@lonestarlows
How high does it hop? Or is it more of a lay and play setup?
Nice work!
Thanks!
I had a question about the pvc around the cylinders. How did you do it? I got mine screeching pretty bad.
Just slice the pvc pipe down the middle and slip it over the cylinder
Hi what year did you get the spindles from ?
1990 I think...
El Camino is up in price because of the lowrider aspect of it and that was my back up when the Impala and Monte Carlo isn't in reasonable price for me. Any cars you know of that look like a Monte Carlo but cheaper?
Can I do a minor frame wrap around the front frame wheel well as well as the uc arms and lc arms as well as rear frame wheel wells and some on axle....will this budget way of frame wrapping help my car from binding ? Any relays bk would help. Thanks and great videos bro!
Yes that is usually called a partial
Ride came out beautiful bro!!!
Nice car real clean set 🔥🔥🔥🔥
😎😏
Can you use stock wheels on a lowrider?
I would love to have this car. My neighbor has the same one, same color, cartier edition "on juice" nice job.
Ive got an 05 navigator i want to put manual switches for the air ride- How do i do this?
Budget build are always the best because you find out more of yourself as a builder.
If I heard right $7800 on the build. That way cheaper Then what I have in my caddy and I don’t have hydros.
Great video bro
Yes. Without the wheels...
@@lonestarlows
I have two sets of those roadstars Ds hard to find complete sets
@@josetrejo6256 👀👀😎
great video.
Did u use spacers ?
no, spindle swap
@@lonestarlows I try to fit 5 lug baby moons on my 26 grand marquis but the stud post was to big to fit on wheel is there anything I can do to fit them
Lol "Color of House" taking budget low riding to a new low. Get it? I'ma quit while I'm ahead. Great job bro!
What Model Is The Lincoln? I'm Sorry I'm New To tha channel, and growing up , tha 63 Impala and Monte Carlo had always been my dream car, but looking up some hydraulic vids, came across this one, and this might js be another on of my dream cars !!❤
2000 town car.
Inspired now, bouta follow this step by step brah 💪🏾💯
😎😎
What year is it the town car
Could you link some of the stuff you bought?
Question? Im looking to build one myself but i live in cali. How is the car on gas milage? How much does it take to fill up the tank and how long does it last?
Too much for where you live probably
CLEAN SETUP
what size and brand are rims....nice that you have shop to work in big asset....SAAA-WHEAT
Hell yeah...great video👌👍
Great job! I see you are in Texas. I have a ford ranger I would like to install hydraulics. Checking to see whats your location and possibly work on my truck with the install etc?
Thanks but I dont really do outside work. You can try fineline street rides. On IG. He's in Houston area and a good friend of mine
Nice! Great Job!
Thanks
Awesome work
thanks
Do you keep front and rear sway bar when you instal hydros
Optional.
Did u do a spindel swap???
Yes
Love the video my man! Appreciate the time you took to give us the tutorial. Question. I just bought my 03 Lincoln town car Cartier. My passenger seat is broke and they said they don’t make the parts anymore. Any info on getting my hands on a new seat?
Junkyard has em in sure
Nice and clean .💯
How much for a set up
where did you get your hydrolics?
Scored the kit on ebay from a guy who changed his mind
What size cylinders you running in the back with the coil over ?
10
My Guy
You Slayed da paint
What sounds better, budget or low cost?I like low cost
Cut or lifted....
How far is the PVC pipe going down the cylander?
All the way
Hit bumper?
Yes
Oralé
NICE BRO 👍👌👊✌💯
Super clean towncar 🔥
Thanks
Where are you located in Texas. I need some assistance with my build. I’m in Austin
Rosharon tx
question LoneStar / 2004 lincoln town car how much u charge for the same setup. am out lakeland fl
That car has an entirely different frame. Most people do frame swaps. The front end needs major fab work to install hydraulics
@@lonestarlows OK thanks I'm just gonna go basic.
That thumbnail is how I want mine to look ❤
Like it!!! Is that a 2000?
2001 I think
Man that looks really nice for it being basic as you say. 👍✅
Thank you 😎
turned out sic!
I need some advice
Hoppos? Great choice
What year is it bro ?
2000
Dam bro 2400 for your hydros! This is why we need to learn to do this ourselves dope af!!
I xdont know what shops charge these days for a basic install??
@@lonestarlowswell to start they charge around 3k 4500 just to re inforce frame
@@sinslap_ yeah, need to diy
@@lonestarlows how do you re inforce a frame diy
Color of House 🤣 🤣 🤣 own that !!!
Damn it’s so beautiful! 🤩
Who ever the hater is that gave you the thumbs down.. stop hating get in the garage and try to do it yourself see what you can do homie. Shit annt ez
Looks 🍒
Add some leafing bro pretty cheap to do!
I've never done any leafing....but won't rule it out
What sz are the rims ? 12s ?
9s
super clean… if you wanted trunk space, would it not have been better to utilize the sides for the batteries, even if you left the pumps where they were…??? would’ve gave you the whole center for ice
chest, chairs m whatnot…
Yeah I want to redo the rack some day. Maybe this summer
it’s such a clean rack though, LOL…!!!
Good job 💪👍
Thanks
Rides just as good as she looks 💪
Super tech baby! Lol good shit...
Nice
Looks good
Color of house lol good one.
Yessir lol
👍💯
color of house made me laugh for a little
Lol
Everyone says you can use trans fluid for hydraulic pump I say that doesn't sound right. You're the first one I herd say trans fluid swells up the O-rings. Thanks for saying that. Like the paint job and suspension work you did on it. She's a keeper.
Thanks. Regular ol motor oil. The cheapest on the shelf
@@lonestarlows Love all the cars and works you have on this channel. I'm in, thanks for your response keep doing what you doing.
can you do my lincoln