I have to hand it to you mate, I never did anything like pipe welding when I was younger apprentice Fitter & Turner, but every bit of pipe work I do now in my own shop, is attributted to learning from you and your channel.
An idea for your nitrogen bottles, could you get an alarm of sorts you can mount on it, that buzzez when it's empty/near empty so you become aware that you've run out?
Interesting video, good welds, but are you qualified in positional welding/site welding where you cannot easily turn the pipe to an easy position to weld it up?
Best way it's good welding course for 6G FM5/FM6 stainless steel and make welding Certificate. Then you have more chance for good job. But it's better have to FM3 cert for carbon. And Training stick welding
When you are the welder/fitter you do what you must do. There Is no wrong or right way. you work in a fabrication shop, not a specialty shop. The color doesn't matter, as long as you have 100% penetration with your beads tied in on each side. Man fk what others have to say, if they can't give you advice when you ask then they don't need to speak.
The G5-01 Speedglas is quite heavy, that’s my biggest complaint about it, along with the weird perspective of the pool you get from looking through all the layers of lenses at some angles. Oh and the cost of consumables and spare parts is extortionate. Good helmet though.
Nice To See An Other Vid From You Chap... No Need For Apologies ... Yourself CEE Australia ... Clickspring and Snowball Engineering .... Well Worth Waiting For Bs Free Ego Free Music Free Quality Content.... Thank You Kindly .. peace
Hey if it comes out alright who cares how hot you're running I'm an American price welder I get it the faster you get it off your table or your stands the quicker you get paid I absolutely understand but normally I'm running around 75 80 amps on stainless 95 amps that's cooking
O yes good job. I wish have that one.
Chill no rush no stress 👍👍
I have to hand it to you mate, I never did anything like pipe welding when I was younger apprentice Fitter & Turner, but every bit of pipe work I do now in my own shop, is attributted to learning from you and your channel.
Thankyou mate I appreciate it
This kinda welding is so dope man looks so clean
Making £4k a week and still getting lectures from people in the comments lol
So...Less than 2k after taxes
Excellent video as always and fantastic work. Always enjoy watching you putting it all together and how you explain it 👍👍
Thats a pain in the rear end having to change all them bottles out throughout your day! Thanks for sharing the roll out turned out great.
It was a pleasure to watch❤
Makes sense. One person, more pesos the world is full of bad businessmen!. Nice work brother.
Good job mate! Instead of the Starret holesaws you could try Phantom cobalt holesaws, they are 8% cobalt and are awesome for stainless
Your videos are top draw, great insight👍
Happy days mate, great work, thanks for sharing, subbed
banging video again.
Good job mate
An idea for your nitrogen bottles, could you get an alarm of sorts you can mount on it, that buzzez when it's empty/near empty so you become aware that you've run out?
Dafür gibt es Armaturen die den Füllstand anzeigen
Interesting video, good welds, but are you qualified in positional welding/site welding where you cannot easily turn the pipe to an easy position to weld it up?
Why doesn't the bottom open up when not welded around in one go, and only the top side at a time?
I see you got a EMPIRE EM71.8 leveler,I have that leveler too.That is a beautiful leveler .
I bought the backpack harness for the adflo after seeing you use it and i love it. Did you stop using it?
What qualifications do you need to weld ss pipe work
Best way it's good welding course for 6G FM5/FM6 stainless steel and make welding Certificate. Then you have more chance for good job.
But it's better have to FM3 cert for carbon. And Training stick welding
were you using a shielding gas for the plasma or just compressed air?
I didn't use the Plasma for anything on this job I only drill holes but the plasma cutter has a built-in air compressor
Did you try carbide tipped hole saws ?
I have I find them a little bit too thick
@@ARCONEWELDING Thick as in the teeth are too wide to cut stainless ?
Where can i find this orange clamp @2:53 ?
carver clamps
Any NDT done on these welds?
10% of the job will get die pen. I'm not sure if this pipe got tested
I do this metric pipework for a living there is no ndt bombing on these pipes.
I’m a journeyman welder/fitter from the US, moving to UK in 2025. Any tips on finding good paying welding jobs in the UK ?
Move around London, the pay is there best there, around £400 per day
Is this money to be made every week at this sort of work and what is the best way to get into this line of work.
It's not every week but it can be achieved majority of the time as long as there is work
4 hours that pretty fast
Bon Boulo 😆😆👍👍
When you are the welder/fitter you do what you must do. There Is no wrong or right way. you work in a fabrication shop, not a specialty shop. The color doesn't matter, as long as you have 100% penetration with your beads tied in on each side. Man fk what others have to say, if they can't give you advice when you ask then they don't need to speak.
why run nitrogen ?
Way cheaper than argon and because it's not food grade nitrogen can be used
Get an Optrel Crystal 2.0 with the swiss air mask, saves your neck
The G5-01 Speedglas is quite heavy, that’s my biggest complaint about it, along with the weird perspective of the pool you get from looking through all the layers of lenses at some angles. Oh and the cost of consumables and spare parts is extortionate. Good helmet though.
It’s interesting to hear how BOC kinda sucks in the UK, as it also does here in NZ. We moved to Air Liquide, much better.
👍👍👍👍
Nice To See An Other Vid From You Chap... No Need For Apologies ... Yourself CEE Australia ... Clickspring and Snowball Engineering .... Well Worth Waiting For Bs Free Ego Free Music Free Quality Content.... Thank You Kindly ..
peace
Have you tried pulse, makes youre welding way faster and making you more money
It's just a single pass. I'd fit it all up and flip flop it too.
👏🏼👏🏼👏🏼
Hey if it comes out alright who cares how hot you're running I'm an American price welder I get it the faster you get it off your table or your stands the quicker you get paid I absolutely understand but normally I'm running around 75 80 amps on stainless 95 amps that's cooking
Don't you cover your arms from radiation?
When I'm welding I do