3자용 아크릴상면여과기 만들기 Acryl Overhead Sump Filter

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 85

  • @skgksl3
    @skgksl3 3 ปีที่แล้ว +1

    선따봉 후시청 하겠습니다

    • @buflko
      @buflko  3 ปีที่แล้ว

      감사합니다.

  • @과천꽃농부
    @과천꽃농부 3 ปีที่แล้ว +1

    잘만드셨네요
    여상보면 쉬울것같지만 막상만들려면
    만만치않은 작업일듯 싶습니다
    언제나 멋진 자작물생활용품
    응원합니다

    • @buflko
      @buflko  3 ปีที่แล้ว

      좋은말씀 감사합니다.

  • @아방트
    @아방트 3 ปีที่แล้ว +2

    ㄷㄷ.. 쭉보다가 어느순간 24분을 다 봤네요.ㄷㄷ
    상면이랑 비슷한 시스템으로 상면식 섬프를 만들까하여 구상중에 또 참고하러 버블코님 유튜브에 왔는데 이번에도 잘보고 갑니다. 치료때문에 입원하셨던걸로 기억나는데 잘되신 것 같아 다행입니다.

  • @benjaminruth2595
    @benjaminruth2595 3 ปีที่แล้ว +2

    Very Nice.It s Fantastic.Great Work.👌👌👌😍

  • @앙코르수족관
    @앙코르수족관 2 ปีที่แล้ว

    내공 짱 입니다~~~~

  • @jooh090909
    @jooh090909 3 ปีที่แล้ว +1

    금손 이십니다~^^

    • @buflko
      @buflko  3 ปีที่แล้ว

      감사합니다

  • @들국화-x4x
    @들국화-x4x 2 ปีที่แล้ว

    만들고싶지만
    그림의 떡~
    영상으로나마
    대리만족하고있습니다~^^

  • @vorda400
    @vorda400 2 ปีที่แล้ว +1

    Very well done
    I like this sump filter that is above the aquarium because I am terribly afraid to drill holes in the glass to have a sump filter under the aquarium

  • @MH-fe1ep
    @MH-fe1ep 3 ปีที่แล้ว

    금손입니다~잘보고갑니다

    • @buflko
      @buflko  3 ปีที่แล้ว

      감사합니다

  • @theluskbarata7533
    @theluskbarata7533 3 ปีที่แล้ว +1

    It's very impressive. Great craftmanship. 👍

  • @seung_tae-k5q
    @seung_tae-k5q 3 ปีที่แล้ว

    역시 금손 입니다~!

    • @buflko
      @buflko  3 ปีที่แล้ว

      감사합니다.

  • @lucapolverino6271
    @lucapolverino6271 3 ปีที่แล้ว +3

    Excelente trabajo, felicitaciones!

  • @어쌔신-x9b
    @어쌔신-x9b 3 ปีที่แล้ว

    역시 멋지십니다.

    • @buflko
      @buflko  3 ปีที่แล้ว

      감사합니다.

  • @yancypbgv
    @yancypbgv 3 ปีที่แล้ว +1

    역시 매니저님 최고!!
    제주일개미도 보고 갑니다!!

    • @buflko
      @buflko  3 ปีที่แล้ว

      ^^ 감사합니다. 남은 주말 잘 보내시길 바랍니다.

  • @user-mw2vf4ce4s
    @user-mw2vf4ce4s 11 หลายเดือนก่อน

    90년대초부터 상면여과기 만들어 사용했음 그냥 소음, 청소 관리 편한 외부여과기가 최곱니다
    자작 외부 여과기도 상면만큼 저렴합니다

  • @4tn_911
    @4tn_911 3 ปีที่แล้ว

    Great... 👍👍👍
    If in Indonesia this is called the FILTER TALANG.. the result is that the water becomes clear and clear like crystal..😍😍

  • @ivancho5854
    @ivancho5854 2 ปีที่แล้ว

    Brilliant! Very well done.

  • @_BBO
    @_BBO 2 ปีที่แล้ว

    너무잘만드셨어요!!!!!

  • @이쁜미니곰
    @이쁜미니곰 6 หลายเดือนก่อน

    금손이라 좋겠수 !!!!!! 나이가 많아 도전도 몬하겠네 수

  • @triplersanjay2413
    @triplersanjay2413 3 ปีที่แล้ว

    Great & dedicated work....

  • @markusbagaskoro5503
    @markusbagaskoro5503 3 ปีที่แล้ว

    22:16 where goes the black sponge?

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      It's in the water.
      It's just that the backscreen is black so it's invisible

    • @markusbagaskoro5503
      @markusbagaskoro5503 3 ปีที่แล้ว

      @@buflko nice work btw 👍👍👍

  • @dineshnagarajan4346
    @dineshnagarajan4346 3 ปีที่แล้ว

    What happens on power cut?? Doesn't need to prime again??

  • @luuvuthien9517
    @luuvuthien9517 3 หลายเดือนก่อน

    어떤 플라스틱 소재를 사용하시나요?

  • @BanhTrang-SuBeo
    @BanhTrang-SuBeo 3 ปีที่แล้ว

    Very good... thank my dear❤️❤️❤️

  • @lisandrolunabonnet7852
    @lisandrolunabonnet7852 3 ปีที่แล้ว

    Excelente trabajo!!! Se puede hacer con láminas de 2 milímetros de grosor?

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      It is recommended to make it at least 5mm thick.

  • @어렵다어려워-l3m
    @어렵다어려워-l3m 3 ปีที่แล้ว +1

    제수조가 무보강 4자수조인데,, 상면여과기사용가능할까요?ㅜ안된다는글도본거같아서 불안해서ㅜㅜ답변부탁드릴게요ㅜㅜ

    • @buflko
      @buflko  3 ปีที่แล้ว

      무보강에 상면올리시는분들 많이 계십니다.

  • @HHH-bw5rk
    @HHH-bw5rk 3 ปีที่แล้ว +2

    솜씨가 좋으시고 공구가 있으시니 참 부럽습니다.. 하나 궁금한 것이 수중 모터가 상면 안에 있으면 만약 수조의 물이 없을 경우 어떻게 되나요? 혹시 화재의 우려는 없는지요?

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      19:05초 보시면 체크볼밸브가 있습니다.
      이 밸브는 수류방향으로 물이 이동시 밸브가 열려있고 말씀하신대로
      정전시 모터가 작동하지 않을경우 아래로 물이 내려오는데
      역류하는 물이 내려가지 않도록 밸브가 잠기는 그런 제품입니다.
      그래서 정전시 상면안에 있는 물이 아래로 내려가지 않습니다.

  • @minky_zip20
    @minky_zip20 3 ปีที่แล้ว +1

    상면 만들기는 엄청 어렵네요!! 이런걸 척척만드시다니!! 대단하세요^^ (까마중)

    • @buflko
      @buflko  3 ปีที่แล้ว

      ^^감사합니다. 처음 작업은 언제나 고생스럽습니다.

  • @duypham2903
    @duypham2903 3 ปีที่แล้ว

    What happen when the light out? Pump will stop working.

    • @buflko
      @buflko  3 ปีที่แล้ว

      19:05 A PVC union check ball valve can be used to prevent water draining in the event of a power failure.

  • @joshuaferguson5756
    @joshuaferguson5756 ปีที่แล้ว

    This is 5t acylic? Why all the supports?

  • @jonbennett4159
    @jonbennett4159 3 ปีที่แล้ว

    Enjoy watching yr uploads.thank you. 🐡👍🇬🇧

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      Thank you!~

  • @ydwon0131
    @ydwon0131 2 ปีที่แล้ว

    아크릴 판 저정도 재단하려고 하면 얼마나 드나요?? 재료값 + 재단값 해서요 !

  • @김양서-t8x
    @김양서-t8x 3 ปีที่แล้ว +1

    시간 가는줄 모르고 집중해서 봤네요 ^^ 재미난 영상 갑사합니다
    보면서 궁금한점 있었는데 바닥에 3줄짜리 아크릴로 된 선(?)은 무슨 역할을 하는 걸까요?

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      원래는 말씀하신 3줄짜리 아크릴 쫄대 위에 치어 루바망을 올려놓고 여과재를 올려야 물의 흐름을 방해하지 않습니다.물의 흐름을 용이하게하기 위해 제작된겁니다.

  • @yogigala674
    @yogigala674 3 ปีที่แล้ว +1

    Top filter

  • @quantumsneak1773
    @quantumsneak1773 3 ปีที่แล้ว

    Very nice :)

    • @buflko
      @buflko  3 ปีที่แล้ว

      Thank you!

  • @Gaon_n
    @Gaon_n 3 ปีที่แล้ว +1

    깔끔하니 이쁩니다. 격벽식이 좀 더 물흐름에 이점이 있지않을까요?

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      감사합니다. 이중격벽을 말씀하시는것 같은데 효율면에서 이중격벽이 더 좋긴합니다. 대신 단일격벽보다는 여과재량은 좀 덜들어가겠죠?

  • @jonggueshin5542
    @jonggueshin5542 3 ปีที่แล้ว

    모서리마다 쫄대를 붙여주신건 보강대를 만들어 주신건가요???

    • @buflko
      @buflko  3 ปีที่แล้ว

      네...아크릴이 5t다 보니 좀 쌔게 보강했습니다.

    • @jonggueshin5542
      @jonggueshin5542 3 ปีที่แล้ว

      @@buflko 아넵 한번 만들어보고싶네요 ㅎㅎㅎ포맥스는 때가 타서

  • @신선명-r8f
    @신선명-r8f 3 ปีที่แล้ว

    주문 가능한지 궁금합니다. 지금껏 본 상면중 가장 좋고 깔끔하네요 이왕 주문 가능하다면 붉은색 아크릴로요

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      감사합니다. 주문은 받지 않습니다. 취미로 유튜브 하면서 만드는거라 시간도 없고 제품 퀄리티도 기성품보다 한참 못합니다. 아크릴상면여과기는 플라테크에서 나온 네모상면여과기가 기능도 좋구 마감도 좋습니다.

  • @yolhu9052
    @yolhu9052 3 ปีที่แล้ว

    집 근처에 아크릴가게가 있는지 알아보고 싶어지는 영상 ㅋㅋㅋㅋㅋ 꼼꼼한 상면여과기네요. 테스트용인가요?

    • @buflko
      @buflko  3 ปีที่แล้ว

      ^^ 유튜브 콘텐츠용및 나중에 사용할 겁니다. 집에 수조가 900x600x600 10T 여서 (보강유리없이)
      배부름이 약간 있어서 불안불안하거든요. 그리고 이미 외부여과기로 세팅해놔서 사용할 일이 아직은 없습니다. 감사합니다.

  • @summer516
    @summer516 2 ปีที่แล้ว

    23:18 두번째 칸막이가 첫번째보다 높은데 어디로 물이 흘러가는건가요?? 밑에 구멍이 있나요?

  • @Chikiwikie
    @Chikiwikie 3 ปีที่แล้ว

    여과재로 영상을 만들어주세요.

  • @guppiesstories5942
    @guppiesstories5942 3 ปีที่แล้ว

    Oh wow. Great overhead sump. Maybe use some BCBs [biocenosis clarification baskets] as your filter. Works by anoxic filteration. Works by converting amonia to nitrite to nitrates and finally to nitrogen gas. The BCBs uses ionic, diffusion and convection to pull in the amonia.

  • @민물고기물생활
    @민물고기물생활 3 ปีที่แล้ว

    와 만들고 싶지만 전 머리가 안되서 이런건 못만드네요ㅋㅋ

    • @buflko
      @buflko  3 ปีที่แล้ว

      재단만 잘 해오면 붙이는건 어렵지 않습니다. 나중에 도전해보세요

  • @34Gw
    @34Gw 3 ปีที่แล้ว +1

    아크릴 레이저 재단기 몇억씩 한다고 들었는데.. 사실인가요?

    • @buflko
      @buflko  3 ปีที่แล้ว +1

      글쎄요. 가격은 안물어 봐서 얼만지는 모릅니다.

  • @김부장-z9x
    @김부장-z9x 3 ปีที่แล้ว +1

    플라스틱 플라스틱 플라스틱 없이 살기 힘드네요^^

    • @buflko
      @buflko  3 ปีที่แล้ว

      플라스틱없이 힘들죠. 재활용을 더 열심히 하는수밖에 없습니다.

    • @naturalhouse8232
      @naturalhouse8232 3 ปีที่แล้ว

      @@buflko 그러게요.

  • @뚱이-l3m
    @뚱이-l3m 8 หลายเดือนก่อน

    상면은 여과효율이좋지만 불편함도 많다 특히 유막은 진심잡기힘들다

  • @betta2432
    @betta2432 ปีที่แล้ว +1

    보기엔 좋아보이는데 물샐 위험이 아주 아주 커보인다는...

    • @buflko
      @buflko  ปีที่แล้ว

      현재까지 사용중인데 물샘없이 잘 작동하고 있습니다. 시중에서 판매하고 있는 아크릴상면여과기 보다 훨씬더 튼튼하게 만들었다고 자부합니다. ^^

    • @betta2432
      @betta2432 ปีที่แล้ว +1

      @@buflko 아 죄송합니다 잘안해본사람이 따라한다면 이라는 말을 빼먹었네요. 혼자 멍때리다가 제가 따라해본다 상상하면서 댓글달아서 죄송합니다

    • @buflko
      @buflko  ปีที่แล้ว

      @@betta2432 ㅎㅎ 아닙니다. 괜찮습니다. ^^

  • @jacob0340
    @jacob0340 หลายเดือนก่อน

    비용이 많이들었을것같아요

  • @이천-b2g
    @이천-b2g 3 ปีที่แล้ว

    난 이미 만들었는데 ㅋ 4자

  • @앙코르수족관
    @앙코르수족관 2 ปีที่แล้ว

    유리 작업보다 손이 더 많이 가는거같아요 ㅠ

  • @pksss5
    @pksss5 3 ปีที่แล้ว +1

    여과기 종류별로 다써봤는데.. 상면만큼 좋은 게 없네요 ㅎ

    • @buflko
      @buflko  3 ปีที่แล้ว

      윗공간의 애매한 포지션때문에 조명달기가 좀 그래도 참 좋은 여과기입니다. 감사합니다.

  • @어머니안계시더냐
    @어머니안계시더냐 3 ปีที่แล้ว +1

    상면 여과기가 비싼 이유.

  • @지호아빠-p3f
    @지호아빠-p3f 2 ปีที่แล้ว

    싸이즈 공개 안됩니까

    • @buflko
      @buflko  2 ปีที่แล้ว

      동영상 설명란 참조하세요.