Very very beautiful if you could make sump filtration like this with explanation would be the greatest video for fish keepers in you tube Your previous video for sump filter doesn't have subtitles to could not understand 😢😢
1. No bracing - It's too dangerous. All of the weight are disbursed on the vertical sump's glass pieces. It'd be taking a toll on the silicone trying to hold it all together. 2. Water Level Too High - Any minor choke on the first sump chamber (usually sponge / wool easy to choke) will send the sump over flooding. And in this way the sump is actually sitting on the tank, the water will overflow out of the tank and dry out your tank - fish will die. - Consider building a sides and middle bracing on your fish tank. - Make the sump slight smaller so it sits on your side and middle bracing. This way any flood will send the water back into the tank - won't kill your fish if you're not at home.
I hope you read it! I have a request and a challenge for you. Can you make a 2 level filter like the one you are making now? And it must be placed under the table and there must also be variations to make it look luxurious!!
@@buflko I will have 600/200/200 mm. What size of glass do I need? And why did you use such thick glass?I really liked your product, I will try to do this. I've watched some of your videos. I really liked them.
Hi there I have questions about intake side of sump: 1. What is the round looking pvc piece that you assembled which connects to the pump? 2. The U shape that you made for water to enter sump, does the connector piece in the middle reduce the size/flow of the pipe? Thanks, excellent overhead sump build.
버플코TV 1. At timestamp 10:10, the piece you are holding in your hand. 2. So the 90 degree elbows are 1” pvc and the connector piece is 1/2”? So should return hole/pipe also be 1/2”? Thanks.
@@demonslayer8085 1) 1/2" Union Check Ball Valve (Prevents backflow of water.) www.commercial-industrial-supply.com/1-2-pvc-true-union-ball-check-valve-npt.html 2) 1/2" 90 degree elbow(2ea) and 1/2" pvc pipe water in pipe size = all 1/2" water out pipe size = all 1" sorry. I do not speak English well.
You need to force the water to overflow from the top and out to the bottom so that the sediment is on the bottom and the clean water passes through the filter layer to the top so that the sediment does not be on top.
I would love to build a filter like that for my six footer...just an idea when cutting holes in glass. Use plastasine to make a well, it holds the liquid (cutting fluid) better
Es muy interesante tu trabajo pero, sería más genial si colocarás unas mallas para que sirvan de filtro y así el agua se mantendría mucho más limpia para los peces.
Hey man, I have a 4×2×2 tank. I want to make a sump just like that, what should be the dimensions for the sump which would be appropriate for my tanks. Also, the glass mm to be used and pump flow rate
Dimensions of the sump, number of baffles, size of the drills for water input and output, glass mm and pump flow rate appropriate for my 4'×2'×2' tank. Please reply, I really loved your work.
I WANT TO INSTALL THIS FILTER SYSTEM. WHAT ARE THE HEIGHT AND WIDTH DIMENSIONS BROTHER. AQUARIUM 150.60.60 I FEED OSCAR FISH THERE ARE 7 PIECES OF 30 CM SIZE.. HOW MANY COMPARTMENTS SHOULD THE FILTER SYSTEM HAVE.. IT IS NOT USED IN TURKEY, I WANT TO USE THIS SYSTEM. IS THIS SYSTEM SUFFICIENT FOR CLEANING THE AQUARIUM? AS A FILTER SYSTEM, I THINK IT WILL BE 150X25X25 CM LENGTH, IT WILL HAVE 7 SECTIONS.
황금 손 이시네요 그냥 저대로 파셔도 잘팔릴거같아요
유리상면 물때 낀게 너무잘보여 장점이자 단점이더군요, 잘만드시네요
^^ 섬프조와 비슷하다고 보면 되겠네요. 감사합니다.
Wow 👌I seen another video of yours and wondered how you did this. And this was the next video. Amazing Job !
Beautiful design. Great waterflow.
Thank you
I love your video but how i wish it can be in english so as more people can benefit from it!
실리콘 면을 정리하실 때 손가락 말고 헤라를 이용해 보세요 그럼 더 깔끔할거예요~!!
I have to say Great video of your Incredible skills @ building this Sump filter .☯️
유리로 만드니 이쁘네요.
감사합니다.
언제봐도 대단하십니다
감사합니다. ^^
와 유리 상면여과기 갖구싶다ㅋ 대단하세요
me encanta tu trabajo, muy bueno, bien explicado y eso que no hablo, ni leo tu idioma
저 무게를 어항이 버틸까??? 하고
계속 보게됐어요.
거기다가 오픈 누드 어항이시네요?
ㄷㄷㄷ
장기간으로 봤을때 위에
따로 튼튼한 선반을 두고 거기다가
저 상면 여과기를 설치하면
더 좋을것도 같아요.
호기심에 유리로 만들어봤습니다. 무겁습니다. 투명한 상면을 원하시면 아크릴로 만드시는게 더 좋아요.
Very very beautiful if you could make sump filtration like this with explanation would be the greatest video for fish keepers in you tube
Your previous video for sump filter doesn't have subtitles to could not understand 😢😢
알고리즘에 의해 금손님의 영상이 떴어요!!
와... 이렇게나 물생활 계에 금손님들이 많습니다👍👍 바로 구독했어요🥹
1. No bracing - It's too dangerous. All of the weight are disbursed on the vertical sump's glass pieces. It'd be taking a toll on the silicone trying to hold it all together.
2. Water Level Too High - Any minor choke on the first sump chamber (usually sponge / wool easy to choke) will send the sump over flooding. And in this way the sump is actually sitting on the tank, the water will overflow out of the tank and dry out your tank - fish will die.
- Consider building a sides and middle bracing on your fish tank.
- Make the sump slight smaller so it sits on your side and middle bracing. This way any flood will send the water back into the tank - won't kill your fish if you're not at home.
If it choked, water would flow over the top of the divide into next compartment. No issue at all. Great design.
Nice design ... But how's the flow once all filtration media in place ? Can it block the flow and end up overflowing the sump?
gaps between chambers are a bit small may restrict water flow.
안녕하세요
유리라그른지. 보기가 참 좋습니다
보강대 없는어항 위에 올리면
터질까 걱정됩니다 ㅎㅎㅎ
영상 잘보고갑니다
네. 유리라 그런지 무게가 많이나갑니다.
제가 만든건 8T 수조에 보강대 5T인데 실제작시 5T유리로 만들면 그나마 무게가 많이 줄어들것 같은데 포멕스로 만든것보다는 더 나갈겁니다.
개쩌네요...마지막 칸 출수되는 칸 수위 높이면 히터같은것도 넣을 수 있고 수상식물도 키울수 있을것같아요
감사합니다. 마지막칸 출수칸을 높이면...전체적으로 높아져서 무게가 많이 나갑니다. ^^
Very Good Overhead Sump Filter
Martin Lee Thanks!👍👍👍👍👍
가운데 부분에 지지대를 달아 주어야 할 것 같아요 아무래고 무게 때문에 유리가 깨지거나 여과기가 터지면 물난리나요 ㅎㄷㄷ
네..유리 자체무게도 상당해서 보강수조나 10T 이상 수조에서만 사용가능 할것 같습니다.말씀하신대로 지지대 설치해 주면 더 좋구요. 아직 사용하고 있지는 않습니다. 사용하면 꼭 그렇게 하도록 하겠습니다. 감사합니다.
멋져보여서 가슴이 두근대지만 들어내서 청소할때 생각하면 절대절대절대 따라하면 안된다고 머리가 소리지르고있음
행님 인사 오지게 박습니다 3000축하 드립니다
^^감사합니다.👍👍👍👍👍
이 비디오는 매우 훌륭합니다. 만드는 방법은 매우 깔끔하고 이해하기 쉽습니다. 🇮🇩👍
Good afternoon friend! If I have an aquarium, it will be 1100/500/250 mm. Can I put a samp 1100/200/200 on it, will the aquarium glass hold up?
캬~ 금손이십니다ᆞ짝짝짝
wonny seo 감사합니다.👍👍👍👍👍
Very cool design! Good for tanks where a sump needs to be added without disturbing the existing installation.
Thank you
I'm from Bali, can you help me translate to English? I like your video but don't understand your language. I apologize for that.
손재수있으시분들 보면 부럽습니다 새우항에도 뭔가만들어줘야할것같은 ㅋ
^^ 감사합니다. 처음 만드는거라 미숙한점이 많아요.
Hi! I really liked the work. What kind of pump do you use?
220V 20W water pump
th-cam.com/video/AySyG7DzcC4/w-d-xo.html
great video, but can you show me the support for the top filter? or you just put the top filter on your tank without support?
how you clean it?
nice work mate
잘봤습니다 신기하네요!
^^ 감사합니다.
Very good idea, tq very much brother🙏🙏😇😇
I hope you read it! I have a request and a challenge for you. Can you make a 2 level filter like the one you are making now? And it must be placed under the table and there must also be variations to make it look luxurious!!
Please tell me also, what is the size of the aquarium? And what is the thickness of the glass of the samp?
Tank Size 900x200x200mm,
Tank glass thickness 8mm,
Sump baffle glass thickness 5mm
Thank you
@@buflko I will have 600/200/200 mm. What size of glass do I need? And why did you use such thick glass?I really liked your product, I will try to do this. I've watched some of your videos. I really liked them.
@@АлександрЛазаренко-ь8к If the size is 600x200x200mm, you can work with 5mm thick glass.
@@buflko Thank you friend
Can the glass carry that much weight?
I think it's temporary. U need solid support for this sump.
살짝 미세하게 휨이 보이는데
여과제까지 넣으면 무게가 ㄷㄷㄷ
카메라 렌즈때문에 약간 휘어보일뿐 휘어지지 않습니다.
Hi there I have questions about intake side of sump:
1. What is the round looking pvc piece that you assembled which connects to the pump?
2. The U shape that you made for water to enter sump, does the connector piece in the middle reduce the size/flow of the pipe?
Thanks, excellent overhead sump build.
1. Gray color PVC Hose nipple??
2. 1/2" PVC Pipe (2cm)
PVC 15A = PVC 1/2"
PVC 25A = PVC 1"
버플코TV 1. At timestamp 10:10, the piece you are holding in your hand.
2. So the 90 degree elbows are 1” pvc and the connector piece is 1/2”? So should return hole/pipe also be 1/2”? Thanks.
@@demonslayer8085 1) 1/2" Union Check Ball Valve (Prevents backflow of water.)
www.commercial-industrial-supply.com/1-2-pvc-true-union-ball-check-valve-npt.html
2) 1/2" 90 degree elbow(2ea) and 1/2" pvc pipe
water in pipe size = all 1/2"
water out pipe size = all 1"
sorry. I do not speak English well.
the connector is to hold the 2 bends together
Very inspiring, greetings from Indonesia 🙋🏻♂
와 저랑 완전 같은 여과기네요
포맥스로 만드는것도 힘들었는데 유리로.. 대단하십니다 👍
여과기 실사용 영상은 없나요?
네..3자 어항을 아직 실사용하지 않아 실사용영상은 없습니다. ^^
Parabéns pelo belo trabalho!
해외 사이트에 1만8천원에 비슷하게 파네요^^;;전 그냥 사는게 맘 편할듯해요...ㅋ금손 인정요
이분을 독일 에하임 여과기 개발팀으로 추천합니다 인정? 어 인정!
😅😅😅😅그정도 까진 아닙니다.
I'm going to make a flower sump thanks
You need to force the water to overflow from the top and out to the bottom so that the sediment is on the bottom and the clean water passes through the filter layer to the top so that the sediment does not be on top.
와 솜씨 대단하시네요~~~
^^ 감사합니다.
Can't you make this out if plexiglass instead of glass so it doesn't break while moving or something. I like the set up and everything but idk 😐
만능이시네요 ㅎㅎ 저도 아크릴이나 포맥스로 만들어 보고 싶네요 (유리는 자신없음)
포맥스로 많이 만드시니..한번 도전해 보시면 어떠실지....^^ 화이팅 입니다.
good idea but i think i would end up putting fish in the sump also
Best top Sump video to understand 👍👍
Friend, tell me, how many partitions should there be in my samp? I just don't really understand it (
Please refer to the link below.
drive.google.com/file/d/16yGIF_25FXMRZEVQ63fj3QeVp4AF4I2o/view?usp=sharing
@@buflko Thank you very much friend. You've helped me a lot. What will be the result. I'll share it with you.
@@АлександрЛазаренко-ь8к Good luck!
Very good filter 👍🏻
Bro nyc filtration system. Wat is da thickness of the glass
Very nice idea 👍
Nice, but what will happen to the water level of that sump when you already put media in it. For sure all water will flow above that divider.
You would obviously adjust the water level
Bots this days
@@pobrengit2642 how can you adjust the water level on the sump if the 2nd baffle on the 1st section is too high? cut it? well thats good then ey?
@@BarPBarPkoyanee did not notice that tho. my bad
Bonsoir Je voulais vous demander si vous avez un système pour un aquarium d'eau de mer dans ce style merci beaucoup magnifique vidéo sacré boulot
Je n'ai pas encore construit de système de filtration pour l'eau de mer. Je vais essayer plus tard. Je vous remercie.
요즘 자작하는데 맛들려서 상면 만들어볼려고 합니다 아크릴로 할 예정인데 3T 는 너무 얇은듯하고 5T 정도면 충분할까요?
적용시킬 어항은 20하이큐브 에요
20큐브에 올리실거면 3T로 만드셔도 충분해 보입니다.
Before you buy try to lift the whole glass assembly first and think if your aquarium could hold it when water is added because its very heavy!
I got 24 inches x 12 inches x 12 inches aquarium. What size should my overhead sump? With measurements please.
영상보니까 나도 뭔가 만들고싶어졌다ㅋㅋ
손: 진심이냐
아 손이 안된다네요
^^
Nice and great👍👌 video.❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
TH- IDEAS Thank you
그때 만들었던 수조가 이렇게 활용되는군요. 제 경우는 상면여과기는 만들때 보다 청소하기가 더 빡쎈 기분이예요. ㅋㅋㅋ 유리라서 그런가 물 흐르는게 쉬원쉬원합니디.
^^ 뭘로 활용할까 하다가 상면여과기로 만들어 봤습니다. 감사합니다.
Excellent Work Thanks For Showing Us 🤗
혹시 여과기 수중모터를 상면여과기 위쪽에서 물을 빨아올리게 하지않고 밑에서 물을 올려주게 하시는 이유가 있나요? 미관상 모터위치를 상면여과기 안쪽으로 위치하면 좋을것 같은데 궁금합니다., ^^;;
특별한 이유는 없습니다
th-cam.com/video/KnRnPM8Q-O0/w-d-xo.html
위에 올리시면 더 깔끔하게 쓸수 있겠죠?
@@buflko 답변감사합니다.~~^^
I would love to build a filter like that for my six footer...just an idea when cutting holes in glass. Use plastasine to make a well, it holds the liquid (cutting fluid) better
Thank you, i am viewer from Indonesia
Thank you
why does each column need two pieces of glasses?
It will clean up any sludge and dirt stuck between the two glasses.
What are the lengths and distances
Es muy interesante tu trabajo pero, sería más genial si colocarás unas mallas para que sirvan de filtro y así el agua se mantendría mucho más limpia para los peces.
Excellent work
유리 상면은 개인적으론 비추입니다. 왜냐면 좀쓰다가 보면 물때도 장난 아니고 이끼에 분진까지....정말 부지런하지 않으면 쓰기 어렵다고 생각해요.
Great video!! very inspiring. but I dont get it why each subsequent column must be lower than the previous column?
That way when u put in the bio media and filters/sponges the water just doesn't flow over top and four it pulls the water through
선생님.. 섬프수조에 직접 유리 격벽을 하나 더 설치해야 하는 상황인데 이럴 경우에도 그냥 선생님이 하신 것처럼 유리 양 옆으로만 실리콘 쏘면 되는걸까요? 유리 단면엔 안 쏴도 되는지...!
9.18 what's the titile? I live the Rap 🥺
Hello my friend am Ricardo from England can this work on a fish pond on a larger scale , I like your idea it's very clever .
Thank you!
@@buflko are you on Instagram?
Yes. Personal instagram.
ID : o.jeong.hwan
금손인정입니다
다만 여과기 중간부분 하중을 받치는게 안보이는데요
저기다 8리터 여과재넣고 버틸까요
좀 위험해보입니다
Thanksyou sharing ide
버플코님 영상보고 저도 명인코리아 에서 자재사다 어항뚫어 3자 하단섬프 만들었습니다.. 알고보니 그업체가 저희집 근처더라고요? ㅋㅋ
경기도 화성이시군요. ^^ 예전에 차타고 직접 사러간적이 있었는데 서울에서 꽤 멀었던 기억이..가까운데 있어서 부럽습니다. 그리고 섬프수조 만든거 축하드립니다.
Di kasih kapas dan bio ring.. Hasilnya.. Luber
잘봤습니다... 그런데 중간에 칸막이를 왜 이중으로 한건가요? 하나는 없어도 되는거 아닌가요?
이중으로 하는 이유는 여과재 넣고 가동하면 나중에 슬러지가 물 흐름대로 이동하다가 이중격벽 사이에 막혀서 가라앉게 됩니다. 그러면 슬러지만 이중격벽 틈사이에 싸이펀을 넣어서 청소하면 상면여과기 청소주기를 늘릴수 있습니다.
혹시 주문제작도 해주시나요?ㅎㅎ
Boss how many gallon that aquarium?
90cm fish tank
출수구쪽에 그라인더로 빗살을 내주는 이유가 먼가요 어떤역할을 하는지 궁금합니다.
기성 유막 제거기랑 비슷한 모양이네요
Es bueno pero debe ser más alto con el material de filtración se desborda lo hice tal cual con una bomba de 120 L y se desbordó por todos lados
De que altura lo hiciste y de cuantos litros es tu pecera? Por favor
At 8:43 what's the size of water mur?
1 inch
Thanks.. 😎
at 10:48 you use smaler water mur, is it 1/2 inch water mur?? I have a plan to build a new tank with top sump filter like yours..
@@alwannugroho ok! 1/2 inch.
@@buflko thanks
De que caudal es la bomba?
It will overflow if you put filter wool and filter medias in the chambers
This is awesome 👍
Can you come build me one for my Discus tank please?🤣✌️🏴
Nice vidio ,I love it my freind 👍
Cuánto cuesta la pecera para México deberían tener una empresa de vender peceras en México me encanta su tecnología gracias
is this safe ?
Looked a lil bit bending at the filter glass bottom...
Hey man, I have a 4×2×2 tank. I want to make a sump just like that, what should be the dimensions for the sump which would be appropriate for my tanks. Also, the glass mm to be used and pump flow rate
I hope that ur filter is not bigger that ur tank
@@eldiefranzjoseph5182 thanks for your interest but the dimensions mentioned above is in feet.
Please reply man.
Dimensions of the sump, number of baffles, size of the drills for water input and output, glass mm and pump flow rate appropriate for my 4'×2'×2' tank. Please reply, I really loved your work.
非常好的視頻，我喜歡！ 你能告訴我那個油槽的尺寸和它是多少升嗎？ 謝謝，來自墨西哥的問候！
I WANT TO INSTALL THIS FILTER SYSTEM. WHAT ARE THE HEIGHT AND WIDTH DIMENSIONS BROTHER. AQUARIUM 150.60.60 I FEED OSCAR FISH THERE ARE 7 PIECES OF 30 CM SIZE.. HOW MANY COMPARTMENTS SHOULD THE FILTER SYSTEM HAVE.. IT IS NOT USED IN TURKEY, I WANT TO USE THIS SYSTEM. IS THIS SYSTEM SUFFICIENT FOR CLEANING THE AQUARIUM? AS A FILTER SYSTEM, I THINK IT WILL BE 150X25X25 CM LENGTH, IT WILL HAVE 7 SECTIONS.
Nice! Wish there would be subtitles
Excelente trabajo. De que grosor son los vidrios?
혹시 단일벽 대신 이중벽으로 만드는 특별한 이유가 있나요?
하단 섬프조와 같은 방법으로 제작했습니다. 나중에 여과재 채우고 쓰다보면 슬러지가 이중격벽 사이로 모이게 되는데 이때 사이펀으로 이중격벽 사이에 넣어서 청소할 수 있습니다.
the measurement all side please... per kube