The explanation you give for the hangup is perfect. Massey 35's are notorious for hanging up if you shift to fast to (R) especially from 1 to R. Hung mine twice before I learned, just slow down the work aint going anywhere it will still be there when you get it in reverse lol. It's an easy fix but just slowing down the shift is a lot faster than having to walk round trip for the prybar. Good video .
Thank you for showing this video , My massey65 tractor while snow blowing lost reverse even when the stick is in the reverse position it goes forward. Do you have any suggestions for this repair ? Thank you Eric
So I did this and it's still stuck. Now I realize I wasn't depressing the clutch when I pushed it FWD. Does it make a difference ? What else can I do since it's still stuck ?
@@caspertheghost7332 Yes, after pushing it Fwd it didn't pop out. So the arm attached to gear you must reach inside behind that arm at the front of the tranny and push the gear back again and it popped loose. I was fortunate to have owned a 1948 Willys Jeep @18 and had rebuilt the tranny, similar gearing with a PTO attached. So if it doesn't pop out by pushing FWD, pry it back and it should pop loose. Best of luck !
![[Full] อังคารคลุมโปง Close Up EP.49 | คนใกล้ผีคนที่ 49 : หมอฉุกเฉิน “หมอบอส” (Thai Sub)](http://i.ytimg.com/vi/dKPUaX7UxMQ/mqdefault.jpg)
Thank you! Good video. I thought that was where I needed to start, mine is stuck in 1st. You saved me some time in research. Have a good day sir.
Thank you for posting this. My dad jammed mine up yesterday and was kind of concerned. I figured it would be a simple fix. You verified my thought.
Glad it helped! Take care of that 35. It will last forever!
The explanation you give for the hangup is perfect. Massey 35's are notorious for hanging up if you shift to fast to (R) especially from 1 to R. Hung mine twice before I learned, just slow down the work aint going anywhere it will still be there when you get it in reverse lol. It's an easy fix but just slowing down the shift is a lot faster than having to walk round trip for the prybar. Good video .
Thanks for that. Just take you time. Guess you have to learn that the hard way sometimes.
Thanks for this video, I helped my dad to get this fixed with the help of this video, our Massey was stucked in same reverse gear.
Great. Glad it helped!
Saved my butt with this video, thank you!
4:29 Thanks a lot.
Very helpful. Thank you
Thankyou, mines stuck in reveres up in the woods. I'll bring it out tomorrow.
Thanks that helped I was in abide
Great video
Thank man
My 135 jammed three days ago in reverse. I was told to do this, but I just couldn't visualize what to do. Now I know!
Glad it helped!
Thank you for showing this video ,
My massey65 tractor while snow blowing lost reverse even when the stick is in the reverse position it goes forward. Do you have any suggestions for this repair ?
Thank you
Eric
Sounds like something is broken. Not just stuck.
@@Mr_Tims .thank you, I guess I will split the tractor and have a look .
So I did this and it's still stuck. Now I realize I wasn't depressing the clutch when I pushed it FWD. Does it make a difference ?
What else can I do since it's still stuck ?
I did the same thing yesterday did you get it unstuck
@@caspertheghost7332 Yes, after pushing it Fwd it didn't pop out.
So the arm attached to gear you must reach inside behind that arm at the front of the tranny and push the gear back again and it popped loose.
I was fortunate to have owned a 1948 Willys Jeep @18 and had rebuilt the tranny, similar gearing with a PTO attached.
So if it doesn't pop out by pushing FWD, pry it back and it should pop loose.
Best of luck !
Thank you soo much i got it unstuck 🎉