How to connect an AC transformer power supply and battery to the IDS alarm panel - tutorial
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- How to connect an AC transformer power supply and battery to the IDS alarm panel - tutorial
860-1-864-XS X64 Control panel
860-1-473-X16 Control panel
I just want to say THANK YOU VERY VERY MUCH...
it was you last 15 seconds of your video that helped me.
THANK YOU
Much Appreciated 🤗
Can you show a video how to connect a Shelly 1 to a gate remote? The standard gate remote we use in South Africa. Thank you 🙏
I wish to make contact with the author of these you tube clips as I have a very troublesome IDS system and cant get it to work.
Thanking you.
Dries van Tonder
Good morning, I have á doubt, yesterday when there was a power cut , the system of alarm was working with battery power then the battery ran out of power and the system turned off , but now that power is back , all the sensor and keypad are turned off, but the keypad lights up and then hang up soon , I ask you to help me what could this be.
Qgood day need does the second infrared beam need to be wired into the alarm box?
No
Hi, do you have a detailed video on the correct way to wire up the back up power supply, I have the IDS alarm and back up supply with 2 new batteries and it won't even last 4 hours, the alarm company says the back up is connected to the Beams only, so I don't understand how it's been wired.
Hi Ashton, did you manage to sort this out? I had a Sherlo Tronics 12V 6.4A backup battery connected and it does not last 2hours.
Hi, it was the battery that was faulty, the lead acid battery is not meant for the loadshedding we get, even a new lead acid battery that is completely drained will never work properly again, I switched over to lithium 7ah batteries, they cost a bit more but last much longer in terms of age.
@@ashtonchetty4408 Thanks for replying. Only 3 months ago I had a 12V backup gel battery installed, but it keeps dying after about 90min of loadshedding. The battery definately does not charge. Thought I was a faulty installation.
@@Zee-z7m I did have a problem with the sherlo back up unit, the power supply was charging at a low voltage so it did not charge the battery enough, if you open it up you will see on the power supply a small plastic adjustment screw use a star screw driver and turn it clockwise if I'm not mistaken it will increase the voltage, mine wasnt adjusting so I bought a power supply from China mall, costed like R150, works perfectly now (note) it should charge over 14v mine was charging at 13v.
@@ashtonchetty4408 thanks Ashton, this is really good advice. I'm no electrician, but I knew something is not right. No instructions of this kind with the installation pamphlet. 🙁