Minwax Hardwood Floor Reviver | Master Bedroom Makeover (Part 2)
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- In this video, I show how I refinished the hardwood floors in my master bedroom with NO SANDING. I cleaned them thoroughly with a Hoover Floormate and applied Minwax Hardwood Floor Reviver low gloss. This is the easiest way I've found to give new life to your tired old hardwood floors. No kneeling, no steel wool, no sanding, no fumes, no mess...
Buy on Amazon:
Hardwood Floor Reviver - amzn.to/1RuzhY3
Hoover Floormate - amzn.to/2CFjHs0
Shur-Line Paint Pad - amzn.to/2EHkI5y
Watch me refinish the floors in my son's room - • Easiest Hardwood Floor...
Watch me install the Magnolia Home wallpaper - • Magnolia Home Wallpape...
Watch my master bath remodel series - • Master Bath Remodel
✔︎Follow me on Facebook, Instagram and Twitter @HandyDadTV
Thank you Sir! Chicago greetings!
My pleasure!
DUDE!!! DUDE!!! You just saved me $1200 in new flooring 😍😍😍😍😍😍 you have no idea how much I love you right now!!! I cancel my order at Home Depot for the flooring and I'm heading out to get this instead!!! I tried it on a small piece of laminate I had laying around and I'm just completely in love of how this looks! Can definitely go two more years without replacing this flooring I got right now
Great to hear! Thanks.
My wood floors are extremely worn and I was looking for something to make them look decent. I was so surprised how beautiful they look! Absolutely and completely love my "new" floors now!! Thank you so much for this video!
So glad you liked it!
Be careful what you put on your wood floors. The wax will build up over the years and it's REALLY hard to remove.
@@loriboyters4171
My question is…Why would you want to remove it? My thoughts are, the only reason I would want to remove it, is if I’m having them totally redone. Professionally sanding and refinishing.
Your thoughts would be appreciated. Thank You
This works. Found the high gloss at Home Depot, After having one room stripped decided to try this for the remaining rooms. Looks better than the stripped floors. Less mess and no dust!
Glad it worked out for you! Thanks for the comment.
I ❤️❤️❤️ YOU!!! You’re an absolute GENIUS!!!
🥰
We just took up our carpet to lay laminate and discovered oak floors in pretry good condition!!! They need a good cleaning and wax. Def going to follow this video. Thank you for posting!
😊👍🏻💯
I could not find the hoover floor mate you used but i did find the bissell crosswave, basically same machine and OMG I cannot believe what it got up out of our wood floors. It was bad as they had been under carper for prob 60 yrs or more. I went over the floors 3 x til water was clean and the floors look amazing. Def my new go to mop :) Pricey machine but well worth it. This weekend will use the reviver :)
Where did you find that machine?
@@handydadtv I saw it at several places looking for your machine. Walmart, Target and Meijer. I bought it at Meijer.
Going to try this on a new house I am buying next month! Subscribed to you too good videos!!
Thanks 😊👍🏻💯
Im happy for you i recently got a new home myself and I’ve been looking for something to do to my hardwood flooring
I was tryin to figure out what to do for my living room floor and now I got it 👍🏾. Thanks brotha 😁
Easy peasy
Now thats whats I call BANG FOR YOUR BUCK!!
It really is a great value.
Lovely video! Thanks. A couple of questions:
1) what area will 32oz wax cover?
2) how often do you change the pad applicator?
3) any idea how to clean hardwood floors from dog pee?
Thanks in advance!
1. One bottle will do an average sized bedroom. You don’t want to run out in the middle of the job, so I recommend getting an extra bottle and return it if you don’t need it.
2. You can reuse the pads if you clean them really well. Otherwise, just throw it away at the end of the day and start with a fresh one each day.
3. Google a solution for that. I’ve never had the pleasure.
Wow I got the wood finish minwax .do you think can I use en the floor?thank you
I don’t think so. Read the label.
Very nice job, Chris.
Thanks Ben.
Hi. Just finished watching the video (which I love) and cannot find low gloss Minwax anywhere.. Have suggestions? thank you
It’s still shown on their website so it’s not discontinued; it must be a supply chain issue.
Hi, I watched several of your videos, thanks for the great tutorials. Just wondering if you ever did a comparison with other similar products like Zep, Rejuvenate etc
No, I found this and have been using it ever since. However, people tell me the low gloss is impossible to find lately.
@@handydadtv yes impossible...
That's cool, but what if I don't have the nifty hoover? Can I mop my floors clean first?
Sure. Just use ammonia and water.
@@handydadtv awesome, one more thing. Can I use a paint roller instead of this paint pad?
I wouldn’t. Rollers drop lint and will leave an orange peel finish.
@@handydadtv okay got it, thank you
Looks really thanks bud
Thanks
Thanks for this video! I can't wait to use this on my very "loved" wood floors. How do you clean the floors after using the Minwax? I saw there is a special cleaner. Is that necessary?
My wife loves Bona and Murphy’s Oil Soap.
@@handydadtv Perfect! Thanks so much! I am doing my floors with Minwax right now so I will let you know how it goes! I appreciate your quick response.
@@rl9935 I love the product! My floors are really worn but this gave them a nice shine and coat. I highly recommend it
I waxed my new bamboo floors with liquid wax for years. After 5 years of wax build-up, the wax started chipping off and it looked terrible! I've been working a little bit at a time for the past year trying to remove it. Two squard feet takes me up to a hour to remove with Simple Green and a scrapper. Any suggestions?
Yikes! No sorry, I’ve never had that problem.
Can I reuse it ? I didn't watch your video on time. I applied it wrong not even like you did. Can I do it again and follow your directions? It won't be too much?
I don’t know. You’d have to try it.
great job!
🔥🔥🔥
👍🏻
Great video! How long does it last before it wears off? I’ve been using floor shine products and they wear off after a few days with normal traffic. TIA!
This won't wear off; it's a permanent coating. It still looks good years later.
It def wears off…
You certainly had some wood worm in the boards you used, this surprises me because I was under the impression that wood worm only attacked soft woods?. A nice job though
These floors are original to the house and they are a poor grade. But that’s part of the “charm” I guess. 😉
We hell, not Im at a crossroads. Im buying a house in on Tuesday and have to leave for work for a week on Thursday. I won't have the time to do it the way I want but could use this. The problem is the best time to sand is while the house is empty. Decisions....decisions
If the floors are in good shape and you don’t want to change the color, this method is fine.
How long do you wait between cleaning the floors and then applying the polyurethane?
Just until it’s dry. That depends on environmental factors like temperature and humidity.
Wow so cool bro
Thanks!
Thanks!
Welcome 😊
Question what is the vacuum called thst you used? I have hard wood floors in bad shape.
I use a Hoover Floormate. There’s a link in the description.
How long did this last?
That depends on your definition of “lasts”. It will never wear off but it will get scuffed over time depending on traffic, like every floor. I never did it again in that room.
@@handydadtv I was thinking more along the lines of the other restorers going back to what it was before in 3-6 months or so but if it's held up and looked decent for years that's good enough for me to try it out. Thanks for replying.
I do not have a Floormate and seems like I can't rent one from homedepot either. Wondering what to do
Use a mop
@@handydadtv I used a mop and then I used Floormate after and was stunned at how much dirt came up!
Can I use this if I sand my floors
No. You need a professional floor finish.
Can you recommend something? I'm doing it myself.
You are ambitious! Ask a nearby hardwood flooring dealer for a recommendation. Oil-based gives the best results, in my experience, but smells bad and takes long to dry. But worth it. Just sleep somewhere else for the night. 😉
Ok thank you. Merry Christmas 🎅 🎄
we have a parquet floor - would this seal the joints?
Only if they are tight.
nice jobe 👍👍
Thanks!
What machine is that ur using ? Can I get the link please
Link is in the video description.
Would I be able to do just a spot?
Yes but you’ll be able to tell because it will be shinier than the rest of the floor.
Does anyone know if thus stuff is like a mop in glow or that orange glow or is it an actual finish Like polyurethane?
It is a water based polyurethane top coat. It’s a new layer of finish. Not a polish.
@@handydadtv Would it work on floors with some bare spots?I have pine floors with a bog layer of poly on it. I would like to fix some of the bare spots where the finish has come off. Os it ideal ?
It’s designed to be a topcoat, not a primary finish. It will soak into the bare spots and you’ll need multiple coats to make it look good. Trouble is, you can just do a spot with polyurethane because you’ll always see the edge. So you’d need at least two coats on the whole floor.
The best results would come from sanding and refinishing the whole floor.
Fumes? Dangers?
None at all. It’s water-based.
Does it hide scratches?
Depends. Most, yes. Deep ones will still be visible. But will still look better.
@@handydadtv Did you ever sand out any deep scratches?
No. Unless you’re going to sand the whole floor, spot sanding only makes it worse.
How long do I have to wait to walk on the floor once it’s applied ?
A couple hours
What is that niose?????
Minwax says that it’s Hardwood Floor Reviver, “Provides beauty and protection for 3-6 months.” That doesn’t sound like urethane to me. What’s going on?
I guess they want you to keep reapplying to buy more product. But I’m telling you, I did it once and that floor looked great for years up until I sold the house.
I used this on my floors & hate how it looks. Even the low gloss is too shiny & now it shows smudges easier & is difficult to clean. Now I have to remove it.
Royal valley
?
Shouldn’t put that dirty water down the sink, unless you want to call the plumber! Of course, handydad is probably good at plumbing too!
Where would you put the dirty water?
You sorta sound like shoenice
0:35 "Come in Tokyo"
There's a thing in the bathroom called a toilet. Perfect for dirty water.
The machine to clean looks nifty, however been told by experts not to apply water on floor, and absolutely never use a steamer.
How do you clean without water? I agree you can’t leave it on the floor, but you can clean with water.
You dont want to use a bunch of water unsealed/unfinished wood. Thats why you wipe down with tack cloth and mineral spirits after sanding a wood floor to bare wood. If you are refinishing a floor without sanding you're fine.
Lol!