Awesome n informative upload. Prefer the plastic hose mender coz its streamline, faster to install n lower profile to minimize snagging on something. Kudos for for all the options. Looking forward to ur next one. Peace
Actually I had tried every version that you displayed on this video. However, I once saw a hose end setup where you cut the old end off and slid the new end on and then threaded in a threaded fitting inside the hose using a supplied tool to repair the hose end. It worked perfect with no exterior clamps or spliced fittings. But I can't find them anymore... Thumbs Up!
Thanks for the video. I believe there is also quick connect kit with a valve. That way, one can control the waterflow or shut it without going to the spigot.
Brilliant items I’ve used a couple of those several time over the years.. I’ve also used super glue fix all adhesive and pushed the brass fitting on to the end tgat the hose came with and a steel clamp it doesn’t drip a bit and my home water pressure at all locations are between 128- 131 psi yes I know that’s above recommended pressure but in 12 years haven’t had any issues with water lines inside the home or outside it makes things better with more water pressure when trying to remove debris from outside and in the shower let’s just say don’t turn the shower head to a couple settings or you will be skinless lol
The problem with many hose menders is they are sized off the ID without considering the OD. Most work on the cheaper thin wall hoses, but not the thicker quality hoses.
The dual hose-clamp, when used in Marine environments goes a step further by alternating the direction of each clamp (perhaps overkill in most situations-but not if it could cause a boat to sink)
some higher quality hoses have and internal structure to prevent kinking . it lies on inside of hose . it needs to be cut out to make these types of menders work and not leak. FYI. ex my hose bought at costco has this features
Buy a commercial hose, you'll be glad you did. My hoses are 24+ years old and are still good. I've had to repair the ends once or twice and I use brass fittings for that.
I have a question, when i connect the hose to the faucet. It always leaks. I have tried different hoses, replaced the washers but it still leaks. I am renting this house its not something that I can replace the faucet. I really dont want to ask the landlord to replace. It nota major repair. I only have one outside faucet. Would you have solution for me. I dont like to waste water, i put a bucket under it and it still overfills. Sorry just venting hoping for a solution.
If you have any holes along the rubber, you can try changing out the female end by cutting off the old and adding a new. It could be corrosion on the metal which would require the same solution. You can by the hose fitting at Walmart in the garden center for cheap and they work just fine. Lowe's has one that comes with a clamp like he showed in the video.
@@lauraservey495 thank you I'll check in to that but it a new hose. I just figured I'll put a bucket underneath. Thanks again for taking time out for me. 🦋😇
Seriously? 1:30 into the video, before he's even said anything of relevance and you jump into a commercial? Also, why was he willing to plug Black and Decker, but not Vaseline?
Do you know that white guy who has the channel where he teaches you how to repair your UPSTAIRS master bedroom wall in case somebody accidentally drives their car through it?
Not really.. do you think that nail got there on it's own? If you had to repair yours it would but he just put it there near the end so that he doesn't puncture his 50ft hose at the 25ft mark. That would be the actual joke xD His goal is to make a video out of it..
ITEMS I USED ON THIS VIDEO:
- GARDENA Hose Repair Mender - amzn.to/4bLTVjf
- Garden Hose Fitting Quick Connector - amzn.to/3yQdHvC
- PEX Pipe Cutter - amzn.to/3yLREpY
- Garden Hose Connector Repair - amzn.to/3VflrP4
- Garden Hose Repair Bar Clamp Style - amzn.to/45ePHOF
- Garden Hose Connector Repair Bar Clamp - amzn.to/4ca0mfQ
- Garden Hose Repair Connector Male & Female Fitting - amzn.to/4aTotyi
- 1” Stainless Steel Hose Clamps - amzn.to/3yPW3rU
- 1/2” Diameter X 4” Length Copper Pipe - amzn.to/3Vfm8YG
- Petroleum Jelly - amzn.to/3XfwqL9
Awesome n informative upload. Prefer the plastic hose mender coz its streamline, faster to install n lower profile to minimize snagging on something. Kudos for for all the options. Looking forward to ur next one. Peace
outstanding demo, thanx so much I have the parts but I have been staring at them for a week which to use and how.
Actually I had tried every version that you displayed on this video. However, I once saw a hose end setup where you cut the old end off and slid the new end on and then threaded in a threaded fitting inside the hose using a supplied tool to repair the hose end. It worked perfect with no exterior clamps or spliced fittings. But I can't find them anymore... Thumbs Up!
I have a quick connect for my pressure washer, works great. Thank you for your time and video sir.
Awesome! I have them installed on mine as well! Time saver! Thank you for sharing! 🙏🏽😊👍🏽
I appreciate your videos so much! I was about to get rid of a very old hose that is leaking at the female connection. Not now!!
Thank you!
I’m glad I was able to help you save your garden hose! 🙏🏽😊
Love the "mender" and the quick disconnects.
Thanks for the video. I believe there is also quick connect kit with a valve. That way, one can control the waterflow or shut it without going to the spigot.
Glad to know! Thank you for sharing!
Bro!! (may I call you "Bro"?) You make excellent videos! Thank you. Real life solutions. Sweet!!
Those are great solutions!!! Thank You!!😄
Brilliant items I’ve used a couple of those several time over the years.. I’ve also used super glue fix all adhesive and pushed the brass fitting on to the end tgat the hose came with and a steel clamp it doesn’t drip a bit and my home water pressure at all locations are between 128- 131 psi yes I know that’s above recommended pressure but in 12 years haven’t had any issues with water lines inside the home or outside it makes things better with more water pressure when trying to remove debris from outside and in the shower let’s just say don’t turn the shower head to a couple settings or you will be skinless lol
Good stuff keep up the good work
Excellent video and informative..
Thank you so much! 🙏🏽😊
Thanks!!!🎉
The problem with many hose menders is they are sized off the ID without considering the OD.
Most work on the cheaper thin wall hoses, but not the thicker quality hoses.
The dual hose-clamp, when used in Marine environments goes a step further by alternating the direction of each clamp (perhaps overkill in most situations-but not if it could cause a boat to sink)
Thanks for sharing. Cheers. 👍🏻
Thank you Ron! Did you ever email me?
@@FixThisHouse No I didn't notice this. What's up?
Good information
Thank you! 🙏🏽
Perfect
Thank you! 🙏🏽
Petroleum jelly may break down some hoses. Try simple rubbing alcohol. Or Dawn dish soap.
Thank you so much! I was going to buy a new one
some higher quality hoses have and internal structure to prevent kinking . it lies on inside of hose . it needs to be cut out to make these types of menders work and not leak. FYI. ex my hose bought at costco has this features
Thank you for sharing! I’ll be doing different garden hose reviews soon! Please stay tuned!
WHY are 'Quick [dis]Connect' Not designed to leave male attachment on hose end. Have spring coupling, (female) on end able to collect sand within?
doesn't this slow down the water flow as the transition piece is not nearly as large as the hose?
Buy a commercial hose, you'll be glad you did. My hoses are 24+ years old and are still good. I've had to repair the ends once or twice and I use brass fittings for that.
I have a question, when i connect the hose to the faucet. It always leaks. I have tried different hoses, replaced the washers but it still leaks. I am renting this house its not something that I can replace the faucet. I really dont want to ask the landlord to replace. It nota major repair. I only have one outside faucet. Would you have solution for me. I dont like to waste water, i put a bucket under it and it still overfills. Sorry just venting hoping for a solution.
If you have any holes along the rubber, you can try changing out the female end by cutting off the old and adding a new. It could be corrosion on the metal which would require the same solution. You can by the hose fitting at Walmart in the garden center for cheap and they work just fine. Lowe's has one that comes with a clamp like he showed in the video.
@@lauraservey495 thank you I'll check in to that but it a new hose. I just figured I'll put a bucket underneath. Thanks again for taking time out for me. 🦋😇
You can use cable ties
Seriously? 1:30 into the video, before he's even said anything of relevance and you jump into a commercial? Also, why was he willing to plug Black and Decker, but not Vaseline?
TapLike &Comment 4AIgos
🙏🏽🙏🏽😊
I just used duct tape and it worked perfectly fine. 😂
Who accidentally drives a nail through their garden hose?
Do you know that white guy who has the channel where he teaches you how to repair your UPSTAIRS master bedroom wall in case somebody accidentally drives their car through it?
It's not a gasket, it's called a washer.
That’s the word I was looking for, thanks! Glad you were paying attention 😉
Connectors cost are way too expensive. By the time you add up the cost might as well buy a brand new host.
Why place a piece of pipe in the hose???? That's not flexible.
Personally, hose clamp solutions are bad, easy way to cut your hands
I agree
I would go with the Gardena Hose Mender for sure! Only $6! amzn.to/4e874F5
And if your hands have been wet for a long time, they cut easier/the cuts are worse in my experience.
Dogs. It's my dog damaging my hoses
What a joke. If you're going to repair your hose that close to the end, dont repair it, just put a new end on it.
Not really.. do you think that nail got there on it's own? If you had to repair yours it would but he just put it there near the end so that he doesn't puncture his 50ft hose at the 25ft mark. That would be the actual joke xD His goal is to make a video out of it..
I put the Gardena on my hose and now it slips off. I think the clamps with a pipe inserted would be tighter. Why not use a pvc pipe