The start of a new Pipeline. For the welding crew at least! ▼ FOLLOW ME ON INSTAGRAM AND X!!! ▼ / xazazelx13 / xazazelx13 #weld #welding #pipelinewelding
Many props to field welder. A friend of mine works the pipe line out of Wisconsin and I had a chance to work with him at another job and now my stick welding and vertical ups are better than they ever were before. Keep fryin.
I'm itching to get into the field. My patience will be rewarded though. To all the welders out there be safe and lay some sexy beads for us who are still learning.
1:00-2:13......WOW, i am speechless that person can do some serious welding, all you people out there that are welders know that going from flat to vertical to almost overhead is EXTREMELY difficult to do without repositioning yourself.....aweomse, i love pipeline welding. i wish that was my job.
The Miller elite is a great lid. I've owned two my new est is the digital. If your going to lay down the coin for one go digital. I wouldnt recommend it for a lot of out doors heavy use where it is subject to the elements. Though i"ve had mine out in some nice Alberta winters. but like i say a great lid for shop use.
Hey thanks for uploading the video its great to watch :) i am 26 and have been learning to pipe weld for about 18months now. Can i ask if you have any tips for the root run with 6010hyp you see i struggle right at the bottom, the root is flush inside of the pipe.... everywhere else it has penetrated 1-2mm ? Do i need a slight increase in amps or you think maybe i just need to 'push it' in more? Any advice would be really helpfull
hey bro i love your vids, do you have any tips for me to get into the pipelines? im in school rightnow and i graduate on october 9th this year. and i would want to join the pipelines? how can i join?
Thanks for reply, i had a go today, root gap 2mm root face 2mm and increased the amps, it felt better had more control... But litterally 1inch right on the bottom...finished of flush inside of the pipe :@ Ill keep trying... will try a further increase in amps tomorow, and change the angle of electrode slightly. 90degrees to the pipe right at the bottom?
On some lines they do weld from the bottom up. They start with a root down, low high vertical up. The video shown here, more than likely the electrode is a 7010 or 6010 5p+. Someone correct me if I am wrong.
I swear you gotta love all the idiots that get on YT & waste our time & space with these worthless, irrelevant comments!!! Thanks for posting good quality trade-related material. The TRUE CRAFTSMEN on here appreciate it i'm sure!!! Good lookin' work bro, keep it up!!! "WELDERS ARE THE REAL BACKBONE OF THE INDUSTRIAL TRADES"
ive been hearing alot about shipyards adopting fcaw for almost everything including pipe, i used to work in a fab plant where we migged and core wire welded low pressure pipe, since it wasnt code a full pen. root was not required but i would often practice at it with little success. do you guys know much about wire welding pipe to code?
In your opinion how likely is it that all this type of welding will become fully/semi automated in years to come? I'm looking into doing this type of work and i'm not quite sure about my future prospects in the industry. Nice videos you have there as well, cheers.
wats the best way to keep a steady hand when ur welding i have a problem with that i go to fast and my welds dont come out rite.......and how much does the pipeline pay
alright i seen guys with that kind of welding hood (the white one) and i seen guys with the welding hood that is kinda like a squared off with circle cardboard, what are those used for are those guys like QC??
Very nice. Where did you (or I guess whoever is being filmed) get started in welding? Small trade school, community college, a bigger, welding specific school or just learned through apprenticeship? There's a big welding school a few states away and I'm wondering if I should go there. Quite an investment to see if I even like doing this haha.
@MrStryperfan Oh oops could you answer my questons bout pg&e? I was wondering if you can weld for them but not be away from home for a month maybe be away for a couple days or whats a job with pg&e that would do that and il still work with my hands not some office job
hey wat company is that and do they require experience workers, i have about at least 1 year of schooling, i just started pipe this semester im on 2 g position , i been using 6010 4 root pass , 7018 4 hot pass , filler, and cap pass
I have a question, since I'm a learning welder, when I weld pipe should I use a 7010 or 7018 for my root pass? I never get good penetration and I plan on getting a pipe cert. Any tips would be greatly appreciated.
i should have gone to school and become a welder, i'm sure its not fun all the time, but what job is right?, i believe it's pretty good money in the oil patch....nice vid!
I meant to put after that you guys have to have your own welding trucks right I'm only asking because I'm going to college to go into this field of welding
for this pipeline, were you guys running stringers in the fill and weaving the cap? or full through weave? i know its different as per the WPS. i couldnt really tell haha. thanks for keeping america held together!
- on this pipe i would use 7016 for the root and 7018 for hotpass fill and cap and is stronger then the pipe itself - but it all depends on metal composition and rod and technique so there is no easy answer to how it should be done:))) great vid anyway - thumbs up@__))
I have a miller elite and yes there good helmets but the lens is flat, so when i'm welding over head all the slag fslls on the lens cover and Burns it up really fast.
do you guys grind between one pass to the other? why dont i ever see you all clean or girnd when stopping and starting agian?...is it not necessary? isnt there a chance of busting x-rays doing that?... just wondering?
Krookiemonster -Each weld is x-ray, after ditching, lowering in, hdd, tie-ins, backfill and alot of other stuff is done they hydro-test the line in the ground, usually miles at a time.
What happen if its raining ? do you have to stop or you put cover while you re working. BTW that is my dream job sir. Next quarter I'll be learning how to weld pipe :)
hi i am thinking about going into pipeline welding can you tell me some of the goods and the bad parts of the job and the basic information on this job? any response would be greatly appreciated
Its like a high pitched bullet whizing by your head. Its in alot of your videos on the firing line. I doubt its a grinder any other ideas? I keep thinking stress cracks for some reason
Certainly one of the best professional video on TH-cam
Many props to field welder. A friend of mine works the pipe line out of Wisconsin and I had a chance to work with him at another job and now my stick welding and vertical ups are better than they ever were before. Keep fryin.
Dreaming of one day getting out of the Navy and getting my own rig and becoming a pipeliner! keep the videos coming!
I'm itching to get into the field. My patience will be rewarded though. To all the welders out there be safe and lay some sexy beads for us who are still learning.
1:00-2:13......WOW, i am speechless that person can do some serious welding, all you people out there that are welders know that going from flat to vertical to almost overhead is EXTREMELY difficult to do without repositioning yourself.....aweomse, i love pipeline welding. i wish that was my job.
Thanks for your videos man. It`s like entering a new world for me. Keep it up, please.
true true, i like both, i love the gold lens their view is amazingly clear
thank you for putting that here I felt like I was there!!
wow awesome ndt mig
Good job from France !
what i hate about most welding videos is that most dont have a lens so you can actually see the different ways the puddle is manipulated
My eye's just got burned from the awesome.
awesome to watch, the only welding i do is brazing copper pipes on refrigeration and AC units, this looks a whole lot more fun. nice job
wow I am now a fan of you guys
Nice work and cool vid your really layin it in nice
Hell yeah brother your bad ass with your trade. I’ve got a couple buddies that weld where all from Sherwood About 20 minutes from Little Rock
Big money. Nothing finer than a pipeliner.
Thanks for all the videos and do you
Very good welders
700,000 views as of today! Thank you to everyone who helped make that possible!
Vocês são muito bons no que diz respeito a soldagem de dutos! valeu
The Miller elite is a great lid. I've owned two my new est is the digital. If your going to lay down the coin for one go digital. I wouldnt recommend it for a lot of out doors heavy use where it is subject to the elements. Though i"ve had mine out in some nice Alberta winters. but like i say a great lid for shop use.
Hey thanks for uploading the video its great to watch :) i am 26 and have been learning to pipe weld for about 18months now.
Can i ask if you have any tips for the root run with 6010hyp you see i struggle right at the bottom, the root is flush inside of the pipe.... everywhere else it has penetrated 1-2mm ?
Do i need a slight increase in amps or you think maybe i just need to 'push it' in more?
Any advice would be really helpfull
This will soon be my job! I can't wait to finish school and actually start welding!!
Arc welding is tiring
This mainline welding video of mine just rolled 350,000 views! Things are looking up!
#Weld
#Welder
#Welding
#Pipeline
let's roll it one more time
hey bro i love your vids, do you have any tips for me to get into the pipelines? im in school rightnow and i graduate on october 9th this year. and i would want to join the pipelines? how can i join?
Luis Trevino make sure you ain't no fucking scab first. Get in a union,these scabs make more money for the company then themselves.
Hey man what motion do you use on the when you get on the bottom of the poor and do you turn the heat down when you get there
both m8, plus mma, depends on "wps" welding procedure specification, different applications have different tensile strengths with differing pressures
badass video :)
Thanks for reply, i had a go today, root gap 2mm root face 2mm and increased the amps, it felt better had more control...
But litterally 1inch right on the bottom...finished of flush inside of the pipe :@
Ill keep trying... will try a further increase in amps tomorow, and change the angle of electrode slightly.
90degrees to the pipe right at the bottom?
cool video! do you happen to know what type/size of fire extinguishers are required on site for pipe welding,i need to buy one for my home shop thanks
On some lines they do weld from the bottom up. They start with a root down, low high vertical up. The video shown here, more than likely the electrode is a 7010 or 6010 5p+. Someone correct me if I am wrong.
hey man got two question.
wut gap yall use for ur roots on pipes?
n wut do u grind ur takes, n restarts with?
I swear you gotta love all the idiots that get on YT & waste our time & space with these worthless, irrelevant comments!!! Thanks for posting good quality trade-related material. The TRUE CRAFTSMEN on here appreciate it i'm sure!!! Good lookin' work bro, keep it up!!! "WELDERS ARE THE REAL BACKBONE OF THE INDUSTRIAL TRADES"
Good job
Very interesting video sir, thanks for putting them up here :)
Is it industry standard to weld everything downhill?
do you have any vids of the sidebooms or other pipeline equipment?
Is all pipe welded downhand /stoved out in Canada ? we always weld vertical up in the UK .I suppose it is easier to weld downhand .
Dude you're a good welder! Love you videos! Oh and I don't care how much you make :P
Can you ask you?
Good vid xAZAZELx13, lookin' forward to getting my rig on the mainline.
What electrodes are you using? and what's the base material reference in AWS?
wow, that was a long bead, how long are your rods and are they 5mm rods
ive been hearing alot about shipyards adopting fcaw for almost everything including pipe, i used to work in a fab plant where we migged and core wire welded low pressure pipe, since it wasnt code a full pen. root was not required but i would often practice at it with little success. do you guys know much about wire welding pipe to code?
8p+ pipeliner best rods for downhill
lol thanks for the help and even wen i try slowin down its not helpin but itll take sum time but how much do they pay per hour and is it a weekly pay
In your opinion how likely is it that all this type of welding will become fully/semi automated in years to come?
I'm looking into doing this type of work and i'm not quite sure about my future prospects in the industry.
Nice videos you have there as well, cheers.
do you work like a week on then a week off or do you work untell the whole job is done then you go home or how does that work?
Superb
wats the best way to keep a steady hand when ur welding i have a problem with that i go to fast and my welds dont come out rite.......and how much does the pipeline pay
Is going to school for welding necessary? Is there a demand for pipeline welders? How much experience is required to work on a pipeline?
cool man...s0 what would be difference between 7010 and 7018?
alright i seen guys with that kind of welding hood (the white one) and i seen guys with the welding hood that is kinda like a squared off with circle cardboard, what are those used for are those guys like QC??
Thay looken for welders i bin welding high pres. For more then ten years tssa. Do thay put a 6010 core and 7018 filler and cap?
Very nice. Where did you (or I guess whoever is being filmed) get started in welding? Small trade school, community college, a bigger, welding specific school or just learned through apprenticeship? There's a big welding school a few states away and I'm wondering if I should go there. Quite an investment to see if I even like doing this haha.
did you guys have to do your 1st pass with 6010???
@MrStryperfan Oh oops could you answer my questons bout pg&e? I was wondering if you can weld for them but not be away from home for a month maybe be away for a couple days or whats a job with pg&e that would do that and il still work with my hands not some office job
Cool video man, I hope to move away from the truck body building industry into pipe welding as soon as someone let's me in.
im 13 and wanted to do this for a few years and it just stuck..... would you guys recomend this?
hey wat company is that and do they require experience workers, i have about at least 1 year of schooling, i just started pipe this semester im on 2 g position , i been using 6010 4 root pass , 7018 4 hot pass , filler, and cap pass
I have a question, since I'm a learning welder, when I weld pipe should I use a 7010 or 7018 for my root pass? I never get good penetration and I plan on getting a pipe cert. Any tips would be greatly appreciated.
Okay because I was using 7010 for my root pass and it was good, but it put down to much keyhole, thanks for the help man
Yeah I used 6010 for the last one and it did pretty good with the root pass, thanks for the help though (:
do u do some welding too? and thats in canada right?
you guys use Lincoln electric 7018 1/8th Excalibur rods?
i should have gone to school and become a welder, i'm sure its not fun all the time, but what job is right?, i believe it's pretty good money in the oil patch....nice vid!
Does that mean water and thick goopy oil run at the same pressures? One would expect higher viscosity fluid to require higher pressures to flow.
is this in Eastern Washington state? past Moses lake?
I meant to put after that you guys have to have your own welding trucks right I'm only asking because I'm going to college to go into this field of welding
very nice
for this pipeline, were you guys running stringers in the fill and weaving the cap? or full through weave? i know its different as per the WPS. i couldnt really tell haha. thanks for keeping america held together!
You will need more than a few welders to keep the U.S. together its fucked
i am 17 and am thinking of getting into this sorta thing what would i need to do
This may be a dumb question and please forgive me if it is.....Do Yall bury those pipes once you're done? or do they just sit there on the pallets?
Tyler Deck were you born yesterday?
what company do yall work for?
- on this pipe i would use 7016 for the root and 7018 for hotpass fill and cap and is stronger then the pipe itself - but it all depends on metal composition and rod and technique so there is no easy answer to how it should be done:))) great vid anyway - thumbs up@__))
are u guys using 7018???
do you know what the pay range is for a rookie/green pipeline welder is?
do they just mig on pipelines or just stick ???
I have a miller elite and yes there good helmets but the lens is flat, so when i'm welding over head all the slag fslls on the lens cover and Burns it up really fast.
very good
This video just rolled 300,000 views. I feel pretty good about that.
xAZAZELx13 what rod is used for downhill pipe for your root fill and cap
xAZAZELx13 what size is the elctrode and is the 8010 used for the root or for the fill and cap
+xAZAZELx13 very good brother big up
ive actually done a heck of alot of research on it
Any suggestions to "get my foot in the door"?
What do you make on average between jobs?
This in Colorado?
Красавцы!!! Увы у нас в Хакасии токого оборудование нет.
do you guys grind between one pass to the other? why dont i ever see you all clean or girnd when stopping and starting agian?...is it not necessary? isnt there a chance of busting x-rays doing that?... just wondering?
how do you ground the pipes?
How much do these guys make a year? I'm very curious
is the miller elite a good welding helmet? message me or reply to some good helmets
this probably seems like a dumb question but do they test for leaks and if so how?
Krookiemonster -Each weld is x-ray, after ditching, lowering in, hdd, tie-ins, backfill and alot of other stuff is done they hydro-test the line in the ground, usually miles at a time.
If welding at oil and gas ,the salary ok or not??
What happen if its raining ? do you have to stop or you put cover while you re working.
BTW that is my dream job sir. Next quarter I'll be learning how to weld pipe :)
hi i am thinking about going into pipeline welding can you tell me some of the goods and the bad parts of the job and the basic information on this job? any response would be greatly appreciated
Be very fit, physically and mentally - conquer boredom.
Be prepared to give up all you love except the next line-up
600,000 views today! Thanks everyone for making that possible!
شو اسم السلك اللي انت شغال بيه
Do you guys use pancake hoods?
Ωραία δουλειά τη ηλεκτροδιο χρησιμοποιούν
Whats the "high pitched noises" that are coming from the pipe itself around 3:22?
Its like a high pitched bullet whizing by your head. Its in alot of your videos on the firing line. I doubt its a grinder any other ideas? I keep thinking stress cracks for some reason
1:12 ¿que electrodo es?
god damn wind. that shit never stops
how do i keep coming back to this video?
@gilberto83 what does "busting xrays" mean?