If there is a wood stud behind the shower wall WHY use an anchor meant for drywall? This anchor will never expand properly. Furthermore, the sharp corners will only dig into the wood so much. Over time the plastic will start to give way and then screws will become loose. This makes NO SENSE.
Bad designed. I regretted that I Bought it. Yes the inner door must be close to the shower head when being used but how Am I going to close the other door when the handle is on the outside of other door. We don’t walk in the shower on the shower head side.
Their are some very crucial steps that need to be explained in more detail like the fucking collar template. 7/8" from edge shower lips varry in size and maybe we want to center it now those 7/8ths ain't worth a shit. Why don't you just say place centered of bumper if that's where it needs to go!
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบรองชนะเลิศ]](http://i.ytimg.com/vi/zPm8ClLVhoE/mqdefault.jpg)
Your video says to make sure there's a stud in the wall, but then says to drill a 5/16" holes and insert the wall anchors. That makes no sense at all.
You completely neglected to address the bottom rail on top of the bathtub and how that attaches. That's precisely why I came to watch this video.
If there is a wood stud behind the shower wall WHY use an anchor meant for drywall? This anchor will never expand properly. Furthermore, the sharp corners will only dig into the wood so much. Over time the plastic will start to give way and then screws will become loose. This makes NO SENSE.
Noo
Bad designed. I regretted that I Bought it. Yes the inner door must be close to the shower head when being used but how Am I going to close the other door when the handle is on the outside of other door. We don’t walk in the shower on the shower head side.
Do you guys have a video, complete step by step how to install a delta contemporary bathtub sliding doors?
bought a set-up from Home Depot and it's more difficult than I thought... even the guy helping me is having issues... thanks
How did you attach the bumpers on the bottom?
Exactly my problem too
I have problems with this door cause my shower head is on the left also my toilet is on the left
My brother love his gift
Their are some very crucial steps that need to be explained in more detail like the fucking collar template. 7/8" from edge shower lips varry in size and maybe we want to center it now those 7/8ths ain't worth a shit. Why don't you just say place centered of bumper if that's where it needs to go!
Can you confirm the template needs to be centered over the bumbers?
The base has a 1 inch bump that runs about 5 inches from each wall.
Better video for this Door here>th-cam.com/video/z9i8Td6-QVo/w-d-xo.html
Useless
do not buy this product,is the worst shower design in the market