CUSTOM VS FACTORY KNIVES! NEVER get scammed again...
ฝัง
- เผยแพร่เมื่อ 30 ก.ค. 2020
- Should I buy a factory knife or should I buy a custom Knife? It's a question many people are wondering... Well today we tell you about the benefits of a factory knife VS the benefits of a Custom knife! This is the video to help you choose what is best for you!
Join the Give-Away!
bit.ly/DBK-MonthyGiveAway
Support us by buying from our shop!
bit.ly/DBKshop
The ColdSteel AD-10 is sponsored by Cold Steel!
bit.ly/ColdSteelDe
The Fallkniven Modern Bowie is sponsored by one of our favourite shops BladeHQ!
shrsl.com/20i50
BladeHQ Channel: bit.ly/DBKmeetsBLADEHQ
________________________ Check us out!________________________
Support us by buying your Gear here (affiliate):
shrsl.com/20i50
The DBK Show PODCAST:
bit.ly/TheDBKShowiTunesApple
Otherwise see:
bit.ly/TheDBKShowAcast
bit.ly/TheDBKShowSoundcloud
bit.ly/TheDBKShowLibsyn
bit.ly/TheDBKShowStitcher
Check out our Patreon Give-Away and support the channel:
bit.ly/DBKPatreon
Discord!: bit.ly/dbkdiscord
Insta: bit.ly/DBKInstagram
FB: bit.ly/DBKFacebook
___________________DBK News and Reviews_____________________
www.dutchbushcraftknives.com
____________________________Music:_____________________________
The Amazing Di-Rect:
• DI-RECT - DEVIL DON'T ...
#factory #Knife #Custom - บันเทิง
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
Yes and here comes the weekly mistake pinned comment!
06:41 is obviously a Fallkniven knife and NOT a Bark River.
Cheers.
Hehehehe... I think I look forward to the humiliation you guys endure to admit your mistakes more than I look forward to the videos themselves. *
* Not really, I'm just kidding. But it is fun to watch your mistakes and outtakes.
For the quality and price Mora Garberg and the Benchmade Pukko is top notch. I have both knives. I love the size and shape of the Benchmade pukko for crafting things and fire craft. I took a stone to the spine of the knife and made it sharp for a ferro rod.
Look up the Rothco Ramster, I bought one and for a hollow handle knife it seems to be good. Its a copy of the buckmaster 184, might make a good video to pull the muscle suit out for.
Okay boys I have a serious question for you about this benchmade 202 leuku vs the 200 puuko, it's been said the puuko was not hardened very high and therefore didn't hold an edge very long buttttt that benchmade did in fact alter their heat treatment protocol for leuku and ran them slightly higher hrc so my question is do you notice a difference??? I sure did just in sharpening them side by side...
You guys inspired me to buy a Bark River Bravo 1 in 3v. Best knife I have ever bought. I love it! Thanks for your great content!
Worth the days wait and could not have said it better myself!!. Bravo Boys!!
I love the woods you live in. Just seems like one of the best places
Great vid for a Friday!
Tried to hit that like button several times, but it just goes on-off-on-off. Bummer.
And yes, the GAW is AWSOME!
(GAWSOME?)
That Bowie and the second knive look amazing! And the AD10 is definitely on my most wanted list...
Great Knive Advice ❤️🌳❤️ best wishes from Germany to you ❤️
My home language(Afrikaans) is based off of their Dutch which always makes it exciting and feel like something that hits close to home
Ik ook van jou broer.
Stay save down there and keep in touch.
I'm waiting for a full Dutch (spoken) episode!
I've always wanted to learn your language
@@nevillesavage2012 If you hunt back through their videos, I'm pretty sure they released some Dutch and English versions of the same ideas. I could be wrong. I know Jorge Spraver releases his in Deutch(?) (German) and English.
@@BradGryphonn Seen them all :) Not a full Dutch Spoken episode
Was the comment “Heart like a mouse, face like a rat”? That’s a keeper.
I like all kinds of knives from production to custom. My current favorite is my benchmade 391 socp in d2.
I dont know what that rope cutting song is but hearing it just gave me a warm happy feeling. It is a good song
YYESSS. I LOVE THE DUTCH INTRO ♥️
I agree fully! That have never been an intro with these guys that are bad!!! Love peace and knifes in our heats for you guys
I love this channel. Where else can I see a frozen knife being beaten with a big wooden mallet.
while on fire!
I’ve started making knives, I’m not forging them, but cutting the shape out of bars of steel, then I temper them with coals and quench them in oil, I couldn’t find my ideal knife so I decided to make it
(It’s not done yet)
Me too 👍
Are you survival lilly
mikael rabb yes
@@mikaelrabb1876 Cool😎🤣
Comrade_Thor_ツ . Ha ha ha 😂😂😂
I myself am a Knife maker and TH-camr and this is the page i go to see what a knife should do....and 100000% not!!! love this channel!!!
You guys need to mention / review TOPS more especially when discussing heat treat. They’re the best in the business.
Thank you for the video guys
Great video! The Benchmade you used was the convexed one or the V edged one?
I really liking this episode!!!! Their was some destruction!! Nice 👍
This is a great video guys 👍
You guys are like the best presenters ever👍👍👍
Going to keep my fingers crossed until that Knife giveaway of the month.
Great video as always
I would like to see you guys some of the higher end production stuff.
Mikkie moved house to his girlfriend Minnie Mouse
That’s a good one
When does Mikkle finds a girlfriend？
B M485 they mentioned it in one of there videos but can’t remember which but they did
I have the bark river aurora.
And my other knifes are opinel.
Imo a great combo and I love the opinels almost as much as my others xD esp for cooking
Not to take a middle ground intentionally, but having had all sorts of knives on the higher end, small batch production knives are most reliably consistent performers. You get a balance of consistency from knife to knife with careful, individual attention to detail in quality control. All of that provided that a maker knows what he is doing. Survive!, TRC, Williams Blade Design, Winkler, I think would all be in that category, and obviously there are others. And, obviously it depends on what you want and need. If you want good looks mostly or cost savings or "cool" factor, that's a different story. Only thing that matters for me personally is reliability and performance for my needs.
100% Dutchy funniness! Nailed it again chaps 👌
duloknives sorry I was too fast in writing the comment ... i saw later in the video!!! superb!!!
I have just thought of an amazing collaboration, get Alec and Will, from Alec Steele channel, to do a Steele v Stelter challenge to produce the best bushcraft knife, and you two be the judges!
Hopefully you guys get your hands on an LT Wright Genesis one of these days 👀 its a beast
A day late, still great. When is the DBK knife coming?!?!
Could i have the link for the cideo where that guy breaks the garberg :)
I want to see you guys test a Williams Collins Custom Knife ... order one from one of the retailers to get one quick, or wait 120 days.
much love! keep it up!
Your my favourite youtubers id love if you make more vids
The budget friendly ‘do everything’ 3 knives!
1. LT Wright Illuminous 5
2. Morakniv Eldris
3. Kizer Domin in VG 10
Custom knives and factory knives approach similar price points when you start looking at high end materials. Fallkniven and Bark River cost the same or a little more than my custom knives in materials like laminated K390 and Magna-Cut.
Hello guys
Can you please test the schrade schf 59
I love your content
This video was worth the extra day wait!
FUN SITE, GREAT CONTENT. MIKE YOUR NUTZ. 😉👍🏻👍🏻👍🏻👍🏻👍🏻
Martin, you’re a stand up guy 👍🏻👍🏻👍🏻👍🏻👍🏻
I like my unique Dulo Puukko indeed, hand made with love in Bulgaria ;)
Marrten has the funniest facial expressions in this video.
I actually think I prefer Friday uploads better! Thanks for the vid
Customer vs factory.
But what about defense standard, often called a military standard, "MIL-STD", "MIL-SPEC", or (informally) "MilSpecs", is used to help achieve standardization objectives by the U.S. Department of Defense?
See the Gerber LMF II Infantry survival knife.
Have you guys done a review of the Helle Viking knife or it’s smaller version yet?
DBK YOU'RE THE BEST!
@2:08 that knife does look so good. I like that.
You guys are great
Can you guys test the mora kansbol
Thx dbk
Amazing vid
have you guys looked at the lionsteel bushcraft?
I’m getting a Dulo Custom knife but I can’t decide and CPM 3V steel or PGK does anyone have any suggestions
How is edge retention on a8mod or Viking steel from Dulo knives?
I made a knife out of m390 steel, send it in to bohler for heat treatment 62 hrc with certification and it cost me for everything including heat treatment 30 dollars 😁 to buy a knife here with m390 it costs about 200 dollars
Weird seeing a new DBK video on a Friday. It feels dirty.
Can you test Polish ns1 knife?
I personally would prefer a custom knife or a handmade knife a custom knives you can get it customized to fit your hand and no one else's and make it fit your needs with as a factory knife is only made to fit one thing now you can modify it overtime if you have the right tools but that still the same as customizing
I am a huge knife fan but i cant afford one, nice video and nice knives 🔪
why don't you guys test lionsteel knives anymore? I would like to see a test of the m7
I was gonna make fun of Mikkie for being unintelligible without subtitles but I just wanted to say I appreciate you guys.
Finally you showed how soft the heat treat is for Benchmade’s 3V!
They upgraded the 3v earlier this year. But production 3v isn't going to have anything on that custom knife they compared it to.
If I remember correctly the chart I looked at said 3-V should only be 59 Rockwell but very tough. If it was any lower than 58 would be kind of a waste IMO
Southpaw Truman from what I have researched their 3V in those rubber handle pretend pukkos was 55-56 HRC....
Tactical Center upgraded it to what exactly?
@@erichklett4847 60-62hrc is the new stated hardness.
Is your shop updated with compound?
God I love their videos so much
Made us all wait! A WHOLE DAY! Next time Mikkie gets fitted for a new dress dont do it on a Thursday!
I want a beaver knife
Thomas Reisinger. We all want beaver
Nice flashbacks to older videos!
At the about the 2:50 mark you can say hi to Maarten if you're quick enough
guys, take a look at ZL knives. awesome stuff!!!
Zooo dat was een langer 24 uur wachten ;)
hahaha! ons excuus!
When i get rich, i will donate to your patreon every month!!!!!
love vids
What was the song In this video?
When u compare the price point of benchmade and custom knife. Benchmade cost the same but quality is way lower. However, people tends to go for their design... I’ve just bought a mini bugout which actually can afford a Fallkniven F1... i go for the orange scale 🤣
I think you guys need to check your video settings. The audio for this one was nothing but nonsensical static for about forty-five seconds toward the beginning of the vid. Sounded really weird. I mean, weirder than usual for a DBK video.
Like Number 100 right here
Nothing to do with anything, but I felt good for some reason
I mean while I agree with the warranty any custom knife maker worth it will make you a new knife if the one you have breaks or chips etc in a non abusive situation. I had a puukko chip while carving and the knife maker apologized and made me a new one. Sometimes bad HT happen
Luv u guyz
WHY WHY WHY. ...... love
Great video guys!! I just bought my 9 Bark River and have three pre-ordered for this year. You're right, has knife lovers we are impatient. 🤷♂️😉👍😂
Omg I’m the guy with the mora at 4:49
Christopher Chan 🤣🤣🤣🤣🔪🔪🔪🔪
its easy... buy a Bark River Bravo. ive been so incredibly impressed by everyone I've handled... that or if you want a real Custom, Dulo Knives... but beware of their Rex-121, its absolutely amazing but.. there's a reason its the most edge retentive steel in the world, seriously it eats Maxamet had S110V and shits K390 and 15V. Dulo does fantastic with all of their steels
👍
I was kinda worried about you when you didn't post the video yesterday. Is Friday the new day for DBK to post away the knife stuffey?
No it was just a one off thing because mikke was moving house
The video was delayed one day because Mikkie is moving house. That way he needed a little bit more time for the video edit. The upload day is still Thursday so stay tuned for next Thursday!
hi
There were knives in there I never saw, they must be holding out.
Mikkie music release when
hello, this is a post
Keep doing the good work, sirs.
Hello guys, what is the best steal for a knife? Mine is 420HC... And I can never get it sharp... ☹️
hey Cole,
420HC is sadly not a good steel. It's very outdated yet some manufacturers keep continue to use it. *Cough Cough... buck...
The best steel though depends on your needs. As a budget steel 1095, 01, 14c28, 80crv2 are good choices. in the higher class most CPM steels will have solid performance
I get it. These guys are Dutch and love knives.
are you spying on us!?
Vet laat!
What song is that?
Where is the god damn DBK knife?!
did u say "because we want to play super smash"?? lool
Ja ik ben lekker aan het kijkenJulie zijn de beste
Commenting your every video that you should test J.P Peltonen Sissipuukko untill you do.
Video 26.
A test of the different old school "bushcraft"-knifes would be fine. Like the different Kephart-Versions (BK62 vs Bark River Kephart 5 for example) or the Nessmuk knifes, or how is a Old Hickory butcher knive performing nowadays. Back to roots.... ;)
That would be fine: Classic Tests!
If you deal with the Kephart style you have to look at the 'Matrosenmesser' / fixed blade sailor knifes from Güde, Hubertus, Linder, Lütters and Otter!
That would have the opportunity to wear a sexy sailor dress and perform some chanties! ;-)
@@bernhard7658 I personally own some of your suggested knifes. But they are folders and I guess nothing for this channel.
@@Robert.Northwoods No, that is a misunderstanding. I mean the fixed blade Matrosenmesser like this: th-cam.com/video/5qtLb1PAmxU/w-d-xo.html .
When is the stropping compound coming back into stock!
it'll be a while. We ordered new ones but shipping is slow with the Corona
@@DutchBushcraftKnives cheers guys
Top kerels
we suppose that a custom knife is better because it should have better quality control, and when the maker buys certified steel he can do hardening tests until reaching an excellent result
let's remember guys that the good maker is the one who does the tests with criterion. almost all of the videos on youtube that I find show me someone who cuts and breaks bricks with a knife but AFTER they never try to cut hair, paper and when the test is destructive nobody knows how to interpret the break. grain distribution, the fracture lines where they come from and where they go .... everyone says "oops, dammn. it broke .. I will never buy again .... ***** .....
like the kid in the video who breaks the Mora with a brush ... but please! had first learned to batoning ...
unfortunately, and I stress unfortunately I have known makers who have sold a low quality steel instead of a more precious steel ... or (but it would already be a minor damage) incorrect heat treatments ...
sure, let's go on trust. are you sure that that custom knife in Vanadis4 Xtra is Vanadis4 Xtra and not Ma5M? only those who are very experienced, have bought many knives AND HAVE REALLY USED AND SHARPENED THEM MANY TIMES (on the stone) in different types of steels can realize.
the average collector, who "uses" the knives only to cut the salami and point a stick of fir wood cannot
he will never see that he actually bought a 10 € Chinese knife which the "maker" has replaced the grips of the handle and slightly grinded the blade, perhaps polishing it a little better than the factory.
I say this because it really happened.
From that moment on I only buy custom knives if I have known the maker well, when I know that he has a good reputation for MY reputation fees and maybe I have had the opportunity to be invited to see how he works. guys .. let's talk clearly: either military, or extreme trekking, or survivol because you go far where no one can come to find you easily, I need the knife. really, for my life. without it I'm literally fucked up.
they are not like many that I know who have all the expensive models of a famous Italian brand but they use a Chinese knife for 20 or 30 € because the military knife gets damaged by scratching the milspec cover on the blade ...
and they consider themselves great experts ... I gladly give her 1000 € to the maker and it seems to me the least that I go home to see how she works. nobody has ever denied me this.
famous brands that I buy I can count them on the fingers of one hand, some of them being Italian I personally know the designers and the owners of the factory and so I went to visit some factories ..
🔪🔪🔪🔪🔪🔪🔪
it is always a pleasure to watch your videos and follow your sympathy.sorry if the speech appears confused in the grammar because I translated my way of speaking ...
Greatings from italy