I’m install those on my 2020 LTZ Silverado like a year ago. FYI,you can install it from the engine bay just open the hood stick your hand to change the light not have to remove anything
Great must do mod but just pop the hood and reach down from the top and it takes about 10 seconds per side and you need no tools. Great design by GM but should have been LED from the factory.
Well when you sell 100s of thousands of trucks and you save a few bucks not doing LEDs it quickly adds up. Especially if it's easy for the consumer to upgrade if they want to. And majority of consumers are happy with how it is. I like LEDs btw.
I agree with the process of popping the hood. Look down just below the headlights and twist tab. Take incandescent bulb out and place LED bulb in the slot. Reinsert and twist tab. Finally, test install. Total time and NO tools needed is approximately two minutes, max. Follow the old saying and acronym, KISS, Keep It Simple Silly. Your welcome and have a great day!
So I replaced signal light with led and now when I use them I get a notice saying check signal light not working. But they are working just blinking faster
Thanks for showing me these lights they are great but I have a better review for you. I installed my turn signal lights and reverse lights five or six months ago. A few days ago I noticed a reverse light was not working after looking threw the taillight I noticed the bulb had broken off and was laying inside the taillight housing. I emailed Lasfit basically wanting to purchase only one bulb. I received a email the NEXT morning asking if my address was still the same and they would send me a new pair out that day. What great customer service they have.
I installed those very lights a couple months ago and love them. I just popped the hood and reached down and did the quarter turn to pull the light. Replaced it, popped it back in, no fuss, no muss, no removing screws or anything! Actually did a video, have my 3yo grandson "helping" me...as soon as I get our channel up and running will be posting it. I've already installed these, the reverse lights and the license plate lights...so I'll give everyone else a chance to win! As for the next mod...not sure, but I would like to know if those mirrors were stock or something you added....
Just an FYI, I swapped mine out for LEDs yesterday and it is very easy to go through the hood to remove them so there is no need to take the screws out of the panel on either side of your truck
Went right through under the hood when I did mine, no fender well access needed. Was a GREAT upgrade and I used LASFIT as well, there are waaaayyy cheaper ones available on ebay but Lasfit is known high quality.
Good video. I have replaced all of the incandescent bulbs with Lasfit too. I love their products. I was to reach my blinkers from the top under the hood. 2020 Silverado RST.
I'd love to see some more auxillary lighting on the truck. Maybe some light bars behind the grille or some rock lights would be awesome. Another awesome and useful lights are the bed lights under the railing. Love the videos and really give me inspiration for future projects for my truck!
I'm not sure if you're a camping man, but if you are, you should look into Softopper out in Colorado. It's a perfect bed topper. I had one on my 2006 silverado and I plan on getting one for my 2021 silverado.
My 2021 High Country came equipped with OEM LED front turn signals. Don’t need to upgrade them, but the rear reverse/backup lights were incandescent and replaced them with Lasfit LEDs! If you have a High Country you cannot LED upgrade, the area where less optioned Silverados have the access circle with the fin to open is not there. Rather there’s a 5mm plastic hex in place of the fin. Upon looking closely at the lense from the front you’ll see there’s a fiber optic light bar instead. Glad I didn’t order the front LEDs!
I’m a little late to the party but I just made the swap on my ‘14 Sierra and while it took some doing, I was able to get it done and it’s awesome. I’m looking at doing the swap on the taillights as well but I may hold off for a bit because I already have LEDs but they’re not nearly as bright so I may have to get on that.
You should do a leveling kit from rough country or the 3” lift and if that’s to high get the AL2 steps as well. I have the AL2s on my 21 RST and the family LOVES them. Or maybe audio upgrades like we did in the early 2000s but clean sound instead of rattles
Big fan! Replaced rear bulbs with Lasfit so nice. Also did the Rough Country Lights. Thought I would mention use a oscillating tool with small bit cuts strait and like butter. Have put the tailgate light strip in my Trail boss love it. They make a kit c55384 part number that allows you to pull 7 round connector off back so the 4 wire t plug behind bumper. No hard wiring. Would love to see a Tail Gate strip that is real bright.
Great video! You just sold me on lasfit for my 2015 Silverado. For your Silverado though, id like to see you tune it for more power and to see how much fuel economy you could gain.
I just changed mine out.. Loving your channel, my wife not so much 😂😂.. I have spent over 12,000 dollars in the last 3 weeks modding my 2020 TB all from your great ideas.. Of course my new 35-12.50-18 tires and wheels and the BDS 4 inch lift cost the most.. I’m not done yet😎🤝
Love your videos. I have already done a few things to my 2021 just based on your videos. I did the license plate & reverse lights 2 days ago. What an amazing change. My street is a busy street and those reverse lights light it all up so people see a vehicle coming out now! So thanks!!! I would like to see a pedal commander or cool air intake and see if the performance change is worth it. Keep doin what your doin! Thanks man
I actually bought these when you did the reverse lights. I went off the link you posted and saw these bad boys. My TrailBoss is fully LED thanks to you brudduh🤙🏼🤙🏼🤙🏼
Not sure what look you are going for with this beautiful truck. I have a 2019 Trail Boss and I have been trying to decide if I want a larger lift. Wondering your thoughts and maybe see a suspension upgrade with your truck.
Stillen Trupower air intake scoop and it should be compatible with the CAI cold air intake. A dyno run would be interesting with the easy bolt on upgrades. I don’t remember if you did a PCV catch can.
Did you have any issues with the truck not reading the new LEDs? I ordered some off of Rockauto and they blink fast as if they're getting ready to "go out". If you didn't have any issues with these, I'm going to order! Thanks!
I would like to see you install the GM Upfitter switches so you can connect your current and future mods to 1 set of switches. I've done this on my 20 Trail Boss LT and was able to eliminate part of the wire harness GM required for the Baja Designs light bar you get through GM Accessories. This way, if you choose to add other lights in the future you won't be dealing with a bunch of different switches all over your interior. And, you won't need to run a bunch of wires to the battery. Just connect to the upfitter switches. Other mods I think would look good on your truck are the sport bar GM offers (will interfere with tonneau covers, so you'll have to be very careful with what you select here, also will require disconnecting CHMSL brake light at electrical center and wiring in brake light in sport bar), and the light bar that mounts on top of the sport bar). Maybe also get the A-pillar led lights GM offers.
So now that you have had your trailboss for a while now do you think the 5.3 is enough power? I’m debating on the 6.2 but a little concerned about gas mileage and premium gas.
Love to see you add a black Sports bar with 4 led lights added to it..... yes..... more lights! Just to piss off the neighbors lmao jk.. but yeah a sports bar be sick!! And will help when driving in wooded areas and back roads.. I have it on my truck.. comes in handy for looking out for deers.
Dang those look sick. I’d love to see the boss get some love on the front lighting. More specifically some led driving lights and Wrap them smoked to darken the front out further.
Continue with the blackout theme. What do you think about a slight tint on the 3rd brake light and tail lights? I have a black 2020 Silverado myself and have been toying with this idea. The huge bright red lights stick out soon bad!
I appreciate all the awesome content you provide. I installed the Lasfit back up light and plates LED and now all my 3 brothers ordered theirs as well. All thanks to you! I would want you to install some bull bars.
On a side note, you should tell any contacts you have at lasfit they need to start shipping to Canada! I have a 2020 trail boss custom and after watching your video on your reverse lights i want to order some for my truck. Plus i'm talking all the exterior lights (highs, lows, markers, reverse, license plate, and turn signals) but they said they dont ship to Canada ☹
Hey brother, I just ordered my turn signals for my '21 LT Trail Boss and wondered if you had heard of an LED upgrade for our headlights? One of the guys I work with had mentioned it a few weeks ago but couldn't remember the brand or any actual details on them. Keep up the great content!
After about 8 months of running these lights on my 21 LT Trail Boss, I’m getting a CAN bus comm error. Many issues through my truck. Pulling them out to see if this helps before going back to the dealership. Any issues in your end?
U could just remove the bulbs from the engine bay it's way to easy to do it from there 😁 i replact mine it didn't even took five minutes ... All the best keep up the good Work 👍
I know I’m late but there’s an easier way to take the lights out without tools, just open the hood and stick your arm down to the turn signal and turn. It’s quicker
I have the 2020 Chevy Silverado Trail Boss LT as you do, I replaced the factory bulbs with the LED’s you did(lasfit). I get interference in the radio when I use my turn signals. Did you get the same ?
I converted my '07 Silverado 2500HD to all LED (except headlights) 2 years ago, now it's time to do the same to our new '20 LT Trail Boss. I originally found your channel when searching upgrades for our Trail Boss and I came across your "Biggest Wheels & Tires on Trail Boss" video. I loved the look of those tires on the Trail Boss and want to do something like that on ours. Can't wait to see what you finally decide to put on permanently. Perhaps a leveling kit and 35's for the next upgrade! I'll be watching to see what you come up with. Thanks!
I was looking into getting all my 2021 RST lights converted to LASFIT but they don't ship to Canada, not sure if it's a COVID thing but I'd love to do it. Is there anyway us Canadians can appreciate the LASFIT name?? Preferably right from LASFIT. Amazon prices are outrageous!!
Modification I would like to see is... A new set of wheels for the Trail boss. I love the stock set but with an offset on the trailboss they look good! Looked really good when you did the swap video. I will be getting one after I finish school and we get moved back to the DFW area. I miss TX. 😢
LH, please help. I've watched several videos regarding the signal bulb replacement. However, on my 2019 1500 High Country 6.2 has no light access on the box. It has the harness with the red tab but no bulb insert beside it. Are You familiar with this setup or am I missing something. I see where the box is molded to have such a place for the quarter turn access point but it simply doesn't exist...!!!!!!
Question…. I have a 2021 TB LT.. My driver side white running light will turn purpleish after it’s been on for a little while.. When you turn on the regular lights it will go back to white… I never had a problem with the passenger side, just the driver side… Chevrolete has already replaced the head lamp but it still does it… I have an appointment to get it replaced again, but I’m not convinced that is going to fix it… Any ideas, I would appreciate it! Thanks
The next upgrade that I would like to see for the Trailboss is the Kicker subwoofer accessory kit for this generation truck. GM/Kicker offer two package options for these truck. The first is the Kicker sub with 200 watt amp that ties into the oem system. The second kit is the sub plus an additional 200 watt amp to power the existing component speakers if you do not have the factory Bose system. Attached below is the GM part numbers. Just subwoofer & sub amp kit-19417164 Subwoofer & amp plus additional amp kit-19417166
Do those lights heat up after being on for more than a few minutes and then begin to hyper flash??Bought a set from a company “G_R” don’t require a resistor and work great, but after a few minutes of hazards being turned on they begin to hyper flash.
I own a 2019 rst and I would like to see you create a video of you upgrading the shocks, uca’s, wheels, and tires. I like to save money and I would trust your judgement based on the content you create.
Not sure if yours came stock but I want to install a frnt camera that works with the existing headunit to pop on when your getting close to something while parking.
Would love to see you turn your truck into an overlanding rig. But for starts how about some running boards. I just installed the Tyger Auto TG-AM2c20248 Star Armor Kit and it looks ridiculously awesome!
Nice man! Love your videos. I’ve been waiting for this video for a while. I’m REALLY hoping I can switch over to LED all over. I’d like to see some interior mods or accessories you think are necessary for everyday life. Hope that helps👍🏼👍🏼
I'd like to see an oil separator addition (JLT is often recommended), removal/disablement of the AutoStart function, or potential running board options. Awesome and useful channel, this is my first new car too, exact as your Trail Boss down to the paint, only a 2021. About to start working through your mods this summer.
I would like to see a bed cover instalation for the silverado. I just got a 2021 silverado and ever since I got the truck I been watching your videos; their pretty sick!👌💯
Are the 2020 different them 2021? I can open the hood reach down and change mine. Simple. Seems easier then doing the fender well thing. Just my .02. Enjoy the channel 👍
This is something chevy should have done from the factory. I changed out most of my bulbs so far on my trailboss to LED, but I have yet to do the front turn signals. I would like to see some options around the catch can mod or possibly the light up emblem ideas. Keep up the great work.
Would like to see a rear view mirror swap, if it didn't come with the auto dimming already. Currently have a 2019 RST and one mod I would like to tackle is that standard to auto dimming mirror.
Love the content as I have a 2019 LT Z71. I'm still undecided on what to do about the front marker lights by the headlights. Did you swap the bulbs for LED as well?
I’ve been subscribed since you guys bought the trailboss. When I bought my 2020 LT I have been enjoying watching your mods and getting ideas. You should look at doing front and rear bumper swaps. There are some pretty sweet sets. My preference is the midnight ranch hand. It’d be pretty sweet if you could go down and meet them since they are in Shiner.
![TOP 5 Silverado MODs + 2 Bad Choices [2019-2024] Trail Boss Modifications](http://i.ytimg.com/vi/ZyVhp7ldrN4/mqdefault.jpg)
![NEEDED Addition to 2019 - 2022 Silverado - Trail Boss [Custom] AVS Aeroskin LightShield](/img/n.gif)
I’m install those on my 2020 LTZ Silverado like a year ago.
FYI,you can install it from the engine bay just open the hood stick your hand to change the light not have to remove anything
Your right i did the same on my 2020 Trail Boss. No need to go in through fender well.
Same here. No tools needed. Not difficult to access at all, and lots of room this way.
I noticed that you could do this after I installed them through the bottom.
Great must do mod but just pop the hood and reach down from the top and it takes about 10 seconds per side and you need no tools. Great design by GM but should have been LED from the factory.
Especially when these trucks are over 50k brand-new, maybe even closer to 60k.
Well when you sell 100s of thousands of trucks and you save a few bucks not doing LEDs it quickly adds up. Especially if it's easy for the consumer to upgrade if they want to. And majority of consumers are happy with how it is. I like LEDs btw.
I agree with the process of popping the hood. Look down just below the headlights and twist tab. Take incandescent bulb out and place LED bulb in the slot. Reinsert and twist tab. Finally, test install. Total time and NO tools needed is approximately two minutes, max. Follow the old saying and acronym, KISS, Keep It Simple Silly. Your welcome and have a great day!
So I replaced signal light with led and now when I use them I get a notice saying check signal light not working. But they are working just blinking faster
Thanks for showing me these lights they are great but I have a better review for you. I installed my turn signal lights and reverse lights five or six months ago. A few days ago I noticed a reverse light was not working after looking threw the taillight I noticed the bulb had broken off and was laying inside the taillight housing. I emailed Lasfit basically wanting to purchase only one bulb. I received a email the NEXT morning asking if my address was still the same and they would send me a new pair out that day. What great customer service they have.
I installed those very lights a couple months ago and love them. I just popped the hood and reached down and did the quarter turn to pull the light. Replaced it, popped it back in, no fuss, no muss, no removing screws or anything! Actually did a video, have my 3yo grandson "helping" me...as soon as I get our channel up and running will be posting it. I've already installed these, the reverse lights and the license plate lights...so I'll give everyone else a chance to win!
As for the next mod...not sure, but I would like to know if those mirrors were stock or something you added....
Chevy really made it easy for that, lasfit didn’t even know it’s much easier than the method he’s showing
Yeah it takes about 10 seconds reaching down from the top and no tools.
The mirrors are stock
I was looking for this comment lol I did the same
Just an FYI, I swapped mine out for LEDs yesterday and it is very easy to go through the hood to remove them so there is no need to take the screws out of the panel on either side of your truck
After seeing these installed on your truck every Texas edition I see driving around looks incomplete. The crispness the LEDs add is amazing.
Are the marker lights already LED? If not how do you replace them?
Have you ever swapped the interior lights to led?
Went right through under the hood when I did mine, no fender well access needed.
Was a GREAT upgrade and I used LASFIT as well, there are waaaayyy cheaper ones available on ebay but Lasfit is known high quality.
Yea I did too
I just replaced my turn signals in less than 5 minutes. No need to remove inner fender well liner. Accessibility is possible from the top.
Nice man did the same upgrade on my 2019 Silverado it’s been about 7 months and haven’t had any issues great product LASFIT
Good video. I have replaced all of the incandescent bulbs with Lasfit too. I love their products. I was to reach my blinkers from the top under the hood. 2020 Silverado RST.
I've got a 2020 High Country and you've made it more appealing for me to make modifications like the LEDs on my truck. Thanks...
Swing out toolboxes for the bed of the truck are a life changer
I'd love to see some more auxillary lighting on the truck. Maybe some light bars behind the grille or some rock lights would be awesome. Another awesome and useful lights are the bed lights under the railing.
Love the videos and really give me inspiration for future projects for my truck!
I'm not sure if you're a camping man, but if you are, you should look into Softopper out in Colorado. It's a perfect bed topper. I had one on my 2006 silverado and I plan on getting one for my 2021 silverado.
Thanks for the vid. Just did the update myself. Reverse camera works so much better at night.
It’s funny how us guys get all excited about a light bulb. It looks great by the way I’m doing this to my Tahoe ASAP.
My 2021 High Country came equipped with OEM LED front turn signals. Don’t need to upgrade them, but the rear reverse/backup lights were incandescent and replaced them with Lasfit LEDs!
If you have a High Country you cannot LED upgrade, the area where less optioned Silverados have the access circle with the fin to open is not there. Rather there’s a 5mm plastic hex in place of the fin.
Upon looking closely at the lense from the front you’ll see there’s a fiber optic light bar instead.
Glad I didn’t order the front LEDs!
I’m a little late to the party but I just made the swap on my ‘14 Sierra and while it took some doing, I was able to get it done and it’s awesome. I’m looking at doing the swap on the taillights as well but I may hold off for a bit because I already have LEDs but they’re not nearly as bright so I may have to get on that.
Just replaced the turn signals and reverse lights. What a huge difference!
Im curious. Have you considered changing your OEM LEDS for the LASFIT? Just curious how much brighter they would be
You should do a leveling kit from rough country or the 3” lift and if that’s to high get the AL2 steps as well. I have the AL2s on my 21 RST and the family LOVES them. Or maybe audio upgrades like we did in the early 2000s but clean sound instead of rattles
The light up LED bow tie would be great to add. Especially with all the LEDs already on there.
Big fan! Replaced rear bulbs with Lasfit so nice. Also did the Rough Country Lights. Thought I would mention use a oscillating tool with small bit cuts strait and like butter. Have put the tailgate light strip in my Trail boss love it. They make a kit c55384 part number that allows you to pull 7 round connector off back so the 4 wire t plug behind bumper. No hard wiring. Would love to see a Tail Gate strip that is real bright.
Great video! You just sold me on lasfit for my 2015 Silverado. For your Silverado though, id like to see you tune it for more power and to see how much fuel economy you could gain.
Not on IG or FB. Great looking lights. Would be nice fit for my 2021 Trail Boss. Keep the videos coming.
I upgraded all my non- led lights to LasFit LEDs on my 20 TrailBoss and love them. Keep the great videos coming can't wait to see what's next.
I just changed mine out.. Loving your channel, my wife not so much 😂😂.. I have spent over 12,000 dollars in the last 3 weeks modding my 2020 TB all from your great ideas.. Of course my new 35-12.50-18 tires and wheels and the BDS 4 inch lift cost the most.. I’m not done yet😎🤝
I would like to see those bright red taillights smoked out. That would look sick!
Love your videos. I have already done a few things to my 2021 just based on your videos. I did the license plate & reverse lights 2 days ago. What an amazing change. My street is a busy street and those reverse lights light it all up so people see a vehicle coming out now! So thanks!!!
I would like to see a pedal commander or cool air intake and see if the performance change is worth it. Keep doin what your doin! Thanks man
For sure it has to be a winch with the upgraded bumper or if not a higher lift kit from Rough Country!
I actually bought these when you did the reverse lights. I went off the link you posted and saw these bad boys. My TrailBoss is fully LED thanks to you brudduh🤙🏼🤙🏼🤙🏼
I replaced my lights and completely agree! They are so much brighter and amazing!
Not sure what look you are going for with this beautiful truck. I have a 2019 Trail Boss and I have been trying to decide if I want a larger lift. Wondering your thoughts and maybe see a suspension upgrade with your truck.
Looks a lot better. They should have come stock this way, 2016 to present.
Stillen Trupower air intake scoop and it should be compatible with the CAI cold air intake. A dyno run would be interesting with the easy bolt on upgrades. I don’t remember if you did a PCV catch can.
Did you have any issues with the truck not reading the new LEDs? I ordered some off of Rockauto and they blink fast as if they're getting ready to "go out". If you didn't have any issues with these, I'm going to order! Thanks!
I would like to see you install the GM Upfitter switches so you can connect your current and future mods to 1 set of switches. I've done this on my 20 Trail Boss LT and was able to eliminate part of the wire harness GM required for the Baja Designs light bar you get through GM Accessories. This way, if you choose to add other lights in the future you won't be dealing with a bunch of different switches all over your interior. And, you won't need to run a bunch of wires to the battery. Just connect to the upfitter switches.
Other mods I think would look good on your truck are the sport bar GM offers (will interfere with tonneau covers, so you'll have to be very careful with what you select here, also will require disconnecting CHMSL brake light at electrical center and wiring in brake light in sport bar), and the light bar that mounts on top of the sport bar). Maybe also get the A-pillar led lights GM offers.
You should do a comparison of the different shorty antennas you can add. The long antenna is an eyesore. I have a 2021 Trail Boss.
Radar director mod. You can use it in the truck and the ZL1. It would be nice to see which brand you would go with.
I did the rear backup light and license light LasFit upgrade and I love it.
So now that you have had your trailboss for a while now do you think the 5.3 is enough power? I’m debating on the 6.2 but a little concerned about gas mileage and premium gas.
Love to see you add a black Sports bar with 4 led lights added to it..... yes..... more lights! Just to piss off the neighbors lmao jk.. but yeah a sports bar be sick!! And will help when driving in wooded areas and back roads.. I have it on my truck.. comes in handy for looking out for deers.
Dang those look sick. I’d love to see the boss get some love on the front lighting. More specifically some led driving lights and Wrap them smoked to darken the front out further.
Continue with the blackout theme. What do you think about a slight tint on the 3rd brake light and tail lights? I have a black 2020 Silverado myself and have been toying with this idea. The huge bright red lights stick out soon bad!
I appreciate all the awesome content you provide. I installed the Lasfit back up light and plates LED and now all my 3 brothers ordered theirs as well. All thanks to you! I would want you to install some bull bars.
With me having a 2016 Silverado I am about to install running boards. I would live to watch you install running boards on your TrailBoss.
On a side note, you should tell any contacts you have at lasfit they need to start shipping to Canada! I have a 2020 trail boss custom and after watching your video on your reverse lights i want to order some for my truck. Plus i'm talking all the exterior lights (highs, lows, markers, reverse, license plate, and turn signals) but they said they dont ship to Canada ☹
Hey brother, I just ordered my turn signals for my '21 LT Trail Boss and wondered if you had heard of an LED upgrade for our headlights? One of the guys I work with had mentioned it a few weeks ago but couldn't remember the brand or any actual details on them. Keep up the great content!
9L7 upfitter installation and tie in the RC Lights to the panel+heavy duty front and rear bumper and auxiliary lighting
Thanks to you, I added the reverse and licence plate lights to mine. AMAZING!!
After about 8 months of running these lights on my 21 LT Trail Boss, I’m getting a CAN bus comm error. Many issues through my truck. Pulling them out to see if this helps before going back to the dealership. Any issues in your end?
U could just remove the bulbs from the engine bay it's way to easy to do it from there 😁 i replact mine it didn't even took five minutes ... All the best keep up the good Work 👍
I know I’m late but there’s an easier way to take the lights out without tools, just open the hood and stick your arm down to the turn signal and turn. It’s quicker
I just changed mines on my 2022 Silverado 1500 LT 😎 gives it a more cool looking front. Next will be the tail lights! Shout out to your from Seattle!
I have the 2020 Chevy Silverado Trail Boss LT as you do, I replaced the factory bulbs with the LED’s you did(lasfit). I get interference in the radio when I use my turn signals. Did you get the same ?
I converted my '07 Silverado 2500HD to all LED (except headlights) 2 years ago, now it's time to do the same to our new '20 LT Trail Boss. I originally found your channel when searching upgrades for our Trail Boss and I came across your "Biggest Wheels & Tires on Trail Boss" video. I loved the look of those tires on the Trail Boss and want to do something like that on ours. Can't wait to see what you finally decide to put on permanently. Perhaps a leveling kit and 35's for the next upgrade! I'll be watching to see what you come up with. Thanks!
I was looking into getting all my 2021 RST lights converted to LASFIT but they don't ship to Canada, not sure if it's a COVID thing but I'd love to do it. Is there anyway us Canadians can appreciate the LASFIT name?? Preferably right from LASFIT. Amazon prices are outrageous!!
Short term love to see the front windows on the 2020 with darker tint. Long term wouldn't mind seeing a larger lift possibly 4-6 inches.
Modification I would like to see is... A new set of wheels for the Trail boss. I love the stock set but with an offset on the trailboss they look good! Looked really good when you did the swap video. I will be getting one after I finish school and we get moved back to the DFW area. I miss TX. 😢
LH, please help. I've watched several videos regarding the signal bulb replacement. However, on my 2019 1500 High Country 6.2 has no light access on the box. It has the harness with the red tab but no bulb insert beside it. Are You familiar with this setup or am I missing something. I see where the box is molded to have such a place for the quarter turn access point but it simply doesn't exist...!!!!!!
Have you heard of the socket missing the turning piece? Mine seems to be missing. It’s just a flat piece with nothing to hold on to turn.
Question…. I have a 2021 TB LT.. My driver side white running light will turn purpleish after it’s been on for a little while.. When you turn on the regular lights it will go back to white… I never had a problem with the passenger side, just the driver side… Chevrolete has already replaced the head lamp but it still does it… I have an appointment to get it replaced again, but I’m not convinced that is going to fix it… Any ideas, I would appreciate it! Thanks
I would like to see some sort of rack system for the back. Maybe a ‘overlander style’ setup? Love the LEDs! No brainer for sure!
The next upgrade that I would like to see for the Trailboss is the Kicker subwoofer accessory kit for this generation truck. GM/Kicker offer two package options for these truck. The first is the Kicker sub with 200 watt amp that ties into the oem system. The second kit is the sub plus an additional 200 watt amp to power the existing component speakers if you do not have the factory Bose system. Attached below is the GM part numbers.
Just subwoofer & sub amp kit-19417164
Subwoofer & amp plus additional amp kit-19417166
Also, I would LOVE a set (or two) of those light pods they’ve just came out with. Purtty.
Would love to see some more auxillary lighting for the truck. Maybe some light bars behind the grille or some rock lights.
Do those lights heat up after being on for more than a few minutes and then begin to hyper flash??Bought a set from a company “G_R” don’t require a resistor and work great, but after a few minutes of hazards being turned on they begin to hyper flash.
I purchased the Amber front blinkers.
WOW, 3 TIMES BRIGHTER
Your exhaust system on the Trail Boss sound sick I am looking to change mine out. I have a 2019 Z71 Silverado what do you recommend.
I’d like to see some running boards added to the Trail Boss.
Did you switch all lights on the trail boss to LasFit LED or just the Un-LED lights? Looking to do my lights.
I own a 2019 rst and I would like to see you create a video of you upgrading the shocks, uca’s, wheels, and tires. I like to save money and I would trust your judgement based on the content you create.
Great Modification would be to put some small wheel spacers to space out the wheels a little bit. I bet your truck would look awesome!
Not sure if yours came stock but I want to install a frnt camera that works with the existing headunit to pop on when your getting close to something while parking.
Do those lights stay on all the time or just used for turn signaling? To use a white and amber when signaling lasfit light?
RC bull guard with light bar! Installed on 2020 1500 awesome lightning!
Not on Instagram or any other social media!
Would love to see you turn your truck into an overlanding rig. But for starts how about some running boards. I just installed the Tyger Auto TG-AM2c20248 Star Armor Kit and it looks ridiculously awesome!
Hell yah I'm ready to see them upgrades and I think you should do an air ride suspension for your truck
Nice man! Love your videos. I’ve been waiting for this video for a while. I’m REALLY hoping I can switch over to LED all over. I’d like to see some interior mods or accessories you think are necessary for everyday life. Hope that helps👍🏼👍🏼
Making a bad ass truck even badder !!!!. Might look sweet with a roll bar with LED lights
I’d like to see an after market bumper :) think it would look nice on the TB! Mahalo braddah!
I’d love to see a 6 inch lift, big tires, and some underglow
I'd like to see an oil separator addition (JLT is often recommended), removal/disablement of the AutoStart function, or potential running board options. Awesome and useful channel, this is my first new car too, exact as your Trail Boss down to the paint, only a 2021. About to start working through your mods this summer.
I would like to see a bed cover instalation for the silverado. I just got a 2021 silverado and ever since I got the truck I been watching your videos; their pretty sick!👌💯
I absolutely love this channel and the content. I really look forward to what lies ahead for that gorgeous truck. Please keep it coming!
Did you level the truck ? And thanks for the LED Setup ! I will be doing the same soon.
No level yet - coming soon!
@@LonestarHawaiian I just ordered the LED lights for my 2020 Trailboss . I used your 10% off code . Thanks ! Keep up the great work!
I read a lot about catch cans to be used on the direct injection engines also other options for in the grill led lights
Tail boss would be cool supercharged with a cowl hood and some stanced wheels
Im waiting for a carbon fiber ram air scoop
New wheels and tires definitely! Some negative offset would look so good!
Are the 2020 different them 2021? I can open the hood reach down and change mine. Simple. Seems easier then doing the fender well thing. Just my .02. Enjoy the channel 👍
This is something chevy should have done from the factory. I changed out most of my bulbs so far on my trailboss to LED, but I have yet to do the front turn signals. I would like to see some options around the catch can mod or possibly the light up emblem ideas. Keep up the great work.
Did you ever put a catch can on your trail boss. I have a 2018 silverado and I am looking for one to put on mine
Looks awesome! Perfect upgrade. It's the little things that make a big difference. Antenna upgrade next?
Did you really do all that instead of just popping the hood and reaching down lol
Lol
Yeah I accessed mine from the top. No tools needed
Would like to see a rear view mirror swap, if it didn't come with the auto dimming already. Currently have a 2019 RST and one mod I would like to tackle is that standard to auto dimming mirror.
Love the content as I have a 2019 LT Z71. I'm still undecided on what to do about the front marker lights by the headlights. Did you swap the bulbs for LED as well?
I’ve been subscribed since you guys bought the trailboss. When I bought my 2020 LT I have been enjoying watching your mods and getting ideas. You should look at doing front and rear bumper swaps. There are some pretty sweet sets. My preference is the midnight ranch hand. It’d be pretty sweet if you could go down and meet them since they are in Shiner.
You should also install the puddle lamps in the underside of the mirrors. It’s totally aesthetic but the ground effect is pretty awesome
I'd like to see you add some popping color to the interior. Cheapies like cup holder inserts or carbon fiber wrap for the wood finish pieces