Thanks for the videos I have a question about global assignments. If i switch the footswitch and assign settings from individual channel to global, what channel is used to determine the global assignments and footswitches?
Thank you so much for clarifying in other comments that is NOT mandatory to use it powered, because in the manuel it says the opposite (WTF) and I had almost given up on it! I'm buying one today.
Hi Dani, Thanks for your comment and kind words, I greatly appreciate it. Not at all, the FS-7 can be used without power. The power is only needed for the LEDs to be active. You'll love the FS-7, it's such a great footswitch! I own several, and there's always a use for one, or two ;-) Let me know if you need anything else. Best regards.
I just want the light to be on if an effect is on, and off if the effect is off. The only way to do this is if I hit it twice. Twice for on and then twice for off. This pedal is very frustrating !!! I have it hooked to my boss 1000 core. Is there maybe a setting in there that would make this work like a normal pedal. *One hit, lights on, effect on. *One hit, light is off, effect is off. I tried everything and can't get it to simply work, as most of by boss equipment that is impossible to do simple... I feel like I need a collage degree to work this stuff. :-/
Check out my exact video for that, if you want the LED to be on when an effects is on, and the same if it's off. I have a dedicated video for that. I hope this helps. Cheers.
You Sir , do a excellent job on the videos . I see that this has been available to watch for about a year or so . I finally pickup the FS -7 a while back and looked abd looked all over TH-cam for a video just like this and found not a one really that explains everything like this one of yours did . Crazy thing is , it just showed up in the feed as i was browsing for something to watch , TH-cam works in useful ways occasionally i reckon lol . Thank you for sharing the info and all that you do . Much appreciated
Hi there, Thank you for watching my video, and for leaving a comment, I greatly appreciate it! Please do let me know if you need anything else, I'd be happy to assist. Have an excellent day. Cheers.
Hi there. Thanks for the tutorial. Do you know if this pedal can be powered at a higher voltage? Ie 9-18v? It doesn’t specify 9v anywhere on the pedal… just the standard blurb from boss saying, “only use with boss power supply”. Which is normally just standard policy from boss. I know a lot of these sorts of utility pedals are variable.
Hi, I have a boss OD200 & DD200 on my board, I’m looking for an external foot switch to operate boost/menu functions. Would this be the one to get? Thanks for the video & subscribed 👍
Hi there! Thanks for your comment and question, I greatly appreciate it! In my honest opinion, yes, it would certainly be. The FS-7 is top of the pop and will work like a charm with the Boss pedals! I have a few ones, that I use with my GT-1, GT-100 and GT-10 - it's a great footswitch, and the size will fit any pedalboard! I believe you'll be able to find information about the use of the FS-7 with your OD200 and DD200 in their respectable Owner's Manuals. Thank you for watching and for subscribing, that really means a lot to me! Please do let me know if there's more I can do. Have a great day!
I see in your other video the FS7 can function Latched or Un Latched, so that would make buying the single switches FS7U and FS7L unnecessary for operating the GT-1. thank you for being so detailed 🔥🎸#️⃣1️⃣
Thanks for watching, I really appreciate it. The FS-7 is a great footswitch - I own several, hehe! Let me know if you need anything else. Best regards.
somebody could help me? I have been looking for the adapter for the DC cable, but I can't find it anywhere. Does anyone know what name or model so I can find it by?
Hello and thank your for your video,i have a question about using this to control the looper function on my roland ac-33 amp, can i start and end a loop with this one?
Hi there, Thanks for watching, and for your question. Yes, the FS-7 will work just fine for this, simply follow the instructions given in the AC-33's Owner's Manual, on Page 9. Link to the Manual here: static.roland.com/assets/media/pdf/AC-33_eng04_W.pdf I hope this helps. Let me know if you need anything else. Best regards.
hi mate , two fs7 already not working anymore , i went to tomlee music shop and they told me cannot repair . both pedal lights worked but no signal going through ... the last fs7 lasted only one month . 1st ctl 2 stopped working and then after some time ctl 3 also stopped .. i am very disappointed . do you an idea what is the cause of this problem ?
Hi, Hmm, that sounds very strange, I haven't had any issues with mine... You might have been unlucky and gotten some from at bad patch... Have you tried contacting Boss, they may be able to assist? Cheers.
Is it posible to set 1 foot switch to latch and the other one to be non latching? i am thinking about using the A button as a remote for an angry driver and the B button as tap tempo for my DD8, and i am unsure if that would function
Hi there, Thank you for your comment and question. Sadly the A and B footswitches share the selected setting... It's common for both, so what you're looking to do isn't possible, atleast not with this footswitch. You need to look at the FS-5L and FS5-U, so that you can set the function of each footswitch. The FS-6 will do the same, if you're looking at have it all in one single footswitch. I hope this helps. Let me know if you need anything else. Cheers.
First, thanks for posting. Your videos are helpful and much appreciated. I know you can use the FS-7 for tapping delay tempo but can I also use it to turn the delay on and off? I'm referring to the delay coming from the GT-1. So I guess my question is can I use the FS-7 with the GT-1, to control delay tempo and turn delay on and off WITHOUT AN external boss delay pedal? I want to use it for the delay effect coming directly from the GT-1. Is this possible? Please lemme know, thank you
Hi there, Thank you for watching, and for leaving a comment, I greatly appreciate it. Sure, the FS-7 can be set up to control a lot of different effects. For example, turn on an overdrive, turn on a compressor and also turn off the reverb. The FS-7 can control both effects and parameters. The answer to your question is; Yes, that's exactly what you can. I hope this makes sense. Let me know if you need anything else. Cheers.
@@GuitarNTabs Thank you for responding. Man...I'm having trouble trying to figure how to do this. Would it be possible for you to make a tutorial on how to assign tap delay to the BOSS FS-7 ? Or could you explain how it's done?
Hi, It might, but it depends on the Ins/Outs on the Collider, I don't know it, so I can't say for sure... I would check the Collider's Manual, it should be listed there. I hope this helps. Cheers.
Hi there. Thanks for your comment and question. The only reason that the FS-7 has the option of being powered via a power supply, is for the function of the LEDs, nothing else. I always power it, because I like to know which footswitch I have activated. I hope this helps. Best regards.
Hello there, Paul. Merry Christmas. Thanks for your comment and question, I appreciate it! That should indeed be possible, yes. Use one output from the FS-7, for example Output A, and connect it to the Angry Driver, and the B output to your amp. For the Angry Driver I believe you should look in the Manual, to see how the FS-7 should be adjusted, in order to work properly. I don't quite know about the Lab Series amp, but it should work just fine. Give it a go, and let me know how it goes. Best regard!
@@GuitarNTabs Thank you. I thought it should work but wanted to check. Seen the FS5 used with the Angry Driver so figured it should work. Thank you and have a great new year!
Hi Mark. Thanks for your comment and question, I greatly appreciate it. The FS-7 can be operated WITHOUT power, yes. A power-supply is only needed for the LEDs, if you want them to light up, that's all. I hope this helps. Let me know if you need anything else. Best regards.
Yes, it can - it can be set up to toggle patches up and down, just like the UP and DOWN footswitches can do, by default. Plenty of options for assigning the different footswitches of the GT-1. Let me know if you need anything else. Best regards.
@@mtaskapablo - I'm happy to hear that! The reason it didn't work well with the Ampero Switch is because it's a Momentary footswitch, for the Boss units it has to be a Latching type, like the FS-7. In fact the FS-7 lets you switch between momentary and latching, depending on what you need the footswitch to do. Please let me know if you need anything else. Best regards.
the real question should be which BOSS FS should be used! this looks useful, yet I see talk of the latched and unlached foot switches for different purpose. I believe the FS 5u can be used yet it is more of a keyboard controller. then there is the FS 5 L which is a single switch, but you could use 2. it is my understanding the two FS5Ls would function the same ways as the one in this video
Hi there, John. Not at all, really... The FS-7 is an all-round footswitch which can be used with a lot of different gear, in this case the GT-1, for controlling the assigns, effects and parameters. Oh. I think we need to get the models correct here - it's the FS5U and FS5L, not the FS-7. Yes, but the FS-7 allows you to be able to switch the mode and its polarity, and then the FS-7 is in a much smaller form-factor. I hope this helps.
@@GuitarNTabs FS5L and FS5U probably were from keyboard then used later by Boss/Roland for guitar multi effects. nice, great videos on your channel, thanks so much! 🎸⚡
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 2 | 29 ก.ย. 67](http://i.ytimg.com/vi/r3lfLNH6Ke4/mqdefault.jpg)
In latched mode, would this work as external controller for activating the Chorus and Reverb effects individually on a Roland JC-22 combo amp?
Thanks for the videos I have a question about global assignments. If i switch the footswitch and assign settings from individual channel to global, what channel is used to determine the global assignments and footswitches?
Thank you so much for clarifying in other comments that is NOT mandatory to use it powered, because in the manuel it says the opposite (WTF) and I had almost given up on it! I'm buying one today.
Hi Dani,
Thanks for your comment and kind words, I greatly appreciate it.
Not at all, the FS-7 can be used without power. The power is only needed for the LEDs to be active.
You'll love the FS-7, it's such a great footswitch!
I own several, and there's always a use for one, or two ;-)
Let me know if you need anything else.
Best regards.
I just want the light to be on if an effect is on, and off if the effect is off.
The only way to do this is if I hit it twice.
Twice for on and then twice for off.
This pedal is very frustrating !!!
I have it hooked to my boss 1000 core.
Is there maybe a setting in there that would make this work like a normal pedal.
*One hit, lights on, effect on.
*One hit, light is off, effect is off.
I tried everything and can't get it to simply work, as most of by boss equipment that is impossible to do simple...
I feel like I need a collage degree to work this stuff.
:-/
Check out my exact video for that, if you want the LED to be on when an effects is on, and the same if it's off.
I have a dedicated video for that.
I hope this helps.
Cheers.
Does fs 7 allow separate functions for holding down a pedal ( making a total of 4 functions)?
You Sir , do a excellent job on the videos . I see that this has been available to watch for about a year or so . I finally pickup the FS -7 a while back and looked abd looked all over TH-cam for a video just like this and found not a one really that explains everything like this one of yours did . Crazy thing is , it just showed up in the feed as i was browsing for something to watch , TH-cam works in useful ways occasionally i reckon lol . Thank you for sharing the info and all that you do . Much appreciated
Hi there,
Thank you for watching my video, and for leaving a comment, I greatly appreciate it!
Please do let me know if you need anything else, I'd be happy to assist.
Have an excellent day.
Cheers.
Hi there. Thanks for the tutorial. Do you know if this pedal can be powered at a higher voltage? Ie 9-18v? It doesn’t specify 9v anywhere on the pedal… just the standard blurb from boss saying, “only use with boss power supply”. Which is normally just standard policy from boss. I know a lot of these sorts of utility pedals are variable.
Hi, I have a boss OD200 & DD200 on my board, I’m looking for an external foot switch to operate boost/menu functions. Would this be the one to get? Thanks for the video & subscribed 👍
Hi there!
Thanks for your comment and question, I greatly appreciate it!
In my honest opinion, yes, it would certainly be. The FS-7 is top of the pop and will work like a charm with the Boss pedals!
I have a few ones, that I use with my GT-1, GT-100 and GT-10 - it's a great footswitch, and the size will fit any pedalboard!
I believe you'll be able to find information about the use of the FS-7 with your OD200 and DD200 in their respectable Owner's Manuals.
Thank you for watching and for subscribing, that really means a lot to me!
Please do let me know if there's more I can do.
Have a great day!
I see in your other video the FS7 can function Latched or Un Latched, so that would make buying the single switches FS7U and FS7L unnecessary for operating the GT-1.
thank you for being so detailed 🔥🎸#️⃣1️⃣
Exactly, John.
Cheers.
I own the Boss FS-7 pedal. Thank you for the tutorial and tips. Much appreciated! 👍
Thanks for watching, I really appreciate it.
The FS-7 is a great footswitch - I own several, hehe!
Let me know if you need anything else.
Best regards.
Awesome video. Great demonstration..
Thank you, I greatly appreciate it.
Let me know if you need anything.
Have a great day.
somebody could help me? I have been looking for the adapter for the DC cable, but I can't find it anywhere. Does anyone know what name or model so I can find it by?
As written in the manual: Boss AC adapter (PSA series)
Hello and thank your for your video,i have a question about using this to control the looper function on my roland ac-33 amp, can i start and end a loop with this one?
Hi there,
Thanks for watching, and for your question.
Yes, the FS-7 will work just fine for this, simply follow the instructions given in the AC-33's Owner's Manual, on Page 9.
Link to the Manual here:
static.roland.com/assets/media/pdf/AC-33_eng04_W.pdf
I hope this helps.
Let me know if you need anything else.
Best regards.
hi mate , two fs7 already not working anymore , i went to tomlee music shop and they told me cannot repair . both pedal lights worked but no signal going through ... the last fs7 lasted only one month . 1st ctl 2 stopped working and then after some time ctl 3 also stopped .. i am very disappointed . do you an idea what is the cause of this problem ?
Hi,
Hmm, that sounds very strange, I haven't had any issues with mine... You might have been unlucky and gotten some from at bad patch...
Have you tried contacting Boss, they may be able to assist?
Cheers.
can this be used with the Boss Singer Live acoustic amp for the looper and the harmony function
Hi!
It should, yes, but have a look in the Owner's Manual for your amp, I'm sure it's listed there.
I hope this helps.
Cheers.
Is it posible to set 1 foot switch to latch and the other one to be non latching? i am thinking about using the A button as a remote for an angry driver and the B button as tap tempo for my DD8, and i am unsure if that would function
Hi there,
Thank you for your comment and question.
Sadly the A and B footswitches share the selected setting... It's common for both, so what you're looking to do isn't possible, atleast not with this footswitch. You need to look at the FS-5L and FS5-U, so that you can set the function of each footswitch. The FS-6 will do the same, if you're looking at have it all in one single footswitch.
I hope this helps.
Let me know if you need anything else.
Cheers.
First, thanks for posting. Your videos are helpful and much appreciated. I know you can use the FS-7 for tapping delay tempo but can I also use it to turn the delay on and off? I'm referring to the delay coming from the GT-1. So I guess my question is can I use the FS-7 with the GT-1, to control delay tempo and turn delay on and off WITHOUT AN external boss delay pedal? I want to use it for the delay effect coming directly from the GT-1. Is this possible? Please lemme know, thank you
Hi there,
Thank you for watching, and for leaving a comment, I greatly appreciate it.
Sure, the FS-7 can be set up to control a lot of different effects. For example, turn on an overdrive, turn on a compressor and also turn off the reverb.
The FS-7 can control both effects and parameters.
The answer to your question is; Yes, that's exactly what you can.
I hope this makes sense.
Let me know if you need anything else.
Cheers.
@@GuitarNTabs Thank you for responding. Man...I'm having trouble trying to figure how to do this. Would it be possible for you to make a tutorial on how to assign tap delay to the BOSS FS-7 ? Or could you explain how it's done?
Can the boss FS 7 be used to toggle between presets on a source audio collider?
Hi,
It might, but it depends on the Ins/Outs on the Collider, I don't know it, so I can't say for sure...
I would check the Collider's Manual, it should be listed there.
I hope this helps.
Cheers.
Thank you for this :)
I've noticed that some people say that to use the latching function, you need a power supply - is this true?
Thanks so much :)
Hi there.
Thanks for your comment and question.
The only reason that the FS-7 has the option of being powered via a power supply, is for the function of the LEDs, nothing else.
I always power it, because I like to know which footswitch I have activated.
I hope this helps.
Best regards.
@@GuitarNTabs Thank you so much for the clarification :) I'm getting the FS 7!
I have an amp (Lab Series L5) with footswitch on/off and a Boss Angry Driver. Would I be able to change both of these with a FS-7?
Hello there, Paul.
Merry Christmas.
Thanks for your comment and question, I appreciate it!
That should indeed be possible, yes. Use one output from the FS-7, for example Output A, and connect it to the Angry Driver, and the B output to your amp. For the Angry Driver I believe you should look in the Manual, to see how the FS-7 should be adjusted, in order to work properly. I don't quite know about the Lab Series amp, but it should work just fine.
Give it a go, and let me know how it goes.
Best regard!
@@GuitarNTabs Thank you. I thought it should work but wanted to check. Seen the FS5 used with the Angry Driver so figured it should work. Thank you and have a great new year!
Is it true that the pedal is fully functional without a power supply? Other youtubers identify otherwise?
Hi Mark.
Thanks for your comment and question, I greatly appreciate it.
The FS-7 can be operated WITHOUT power, yes.
A power-supply is only needed for the LEDs, if you want them to light up, that's all.
I hope this helps.
Let me know if you need anything else.
Best regards.
@@GuitarNTabs This is not true. It must be powered for latch mode. This is a real pain in the ass.
Can this be used in switching patches?
Yes, it can - it can be set up to toggle patches up and down, just like the UP and DOWN footswitches can do, by default.
Plenty of options for assigning the different footswitches of the GT-1.
Let me know if you need anything else.
Best regards.
Can I use this with my Boss gx100?
Sure you can, it's described in the Manual for the GX-100 how to connect it, and how to set it up for use with Assigns, etc.
@@GuitarNTabs works perfectly, yes. I tried before with my "Ampero Switch" but it did not work well... Thanks!
@@mtaskapablo - I'm happy to hear that!
The reason it didn't work well with the Ampero Switch is because it's a Momentary footswitch, for the Boss units it has to be a Latching type, like the FS-7.
In fact the FS-7 lets you switch between momentary and latching, depending on what you need the footswitch to do.
Please let me know if you need anything else.
Best regards.
Nothing on the polarity switch!?
Hi Bill,
What information are you looking for, in regards to the Polarity Switch?
Cheers.
@GuitarNTabs was hoping on a gist of, "open & closed states." Maybe an example of when to use either of them.
the real question should be which BOSS FS should be used!
this looks useful, yet I see talk of the latched and unlached foot switches for different purpose.
I believe the FS 5u can be used yet it is more of a keyboard controller.
then there is the FS 5 L
which is a single switch, but you could use 2.
it is my understanding the two FS5Ls would function the same ways as the one in this video
Hi there, John.
Not at all, really... The FS-7 is an all-round footswitch which can be used with a lot of different gear, in this case the GT-1, for controlling the assigns, effects and parameters.
Oh. I think we need to get the models correct here - it's the FS5U and FS5L, not the FS-7.
Yes, but the FS-7 allows you to be able to switch the mode and its polarity, and then the FS-7 is in a much smaller form-factor.
I hope this helps.
@@GuitarNTabs FS5L and FS5U probably were from keyboard then used later by Boss/Roland for guitar multi effects.
nice, great videos on your channel, thanks so much!
🎸⚡
@@johnmcminn9455 - That may very well be the idea, yes.
Always happy to assist.
Have a great day.