Electro Eliminator Rudder Mods | Better - Lighter - Faster - Oh My!
ฝัง
- เผยแพร่เมื่อ 23 ก.ย. 2020
- Modify your RC boat rudder for improved cooling, lighter weight, and greater speed... You're already racing, so you might as well win!
See more on Facebook at M5PerfHydros
amzn.to/3XxuKK1 Starbond Flexible Medium CA is the only CA glue you will ever need and is available through my Amazon Affiliate link
amzn.to/3CW6DwJ 48 Inch Aluminum Straightedge - Gotta have it!
amzn.to/3iD3ZVK G/Flex Epoxy - This is the one you want for the majority of the assembly. Getcha some!
amzn.to/3XtMlSU Dremel wood cutting wheel as seen in my videos. You need this!
amzn.to/3QAtfIy Get this Dremel mandrel for mounting the cutting wheel.
amzn.to/3vXd7Yc Digital angle gauge. We'll be using this a LOT during the build. Get it now so you'll be ready.
amzn.to/3kbMdcq THE BEST epoxy application brushes - no stray hairs! Luv em!
As an Amazon Associate I earn from qualifying purchases - But the good news is there is no additional cost to you, only great products!
And don't forget to subscribe to see the full conversion and lots more great RC Hydroplane Racing videos! - แนวปฏิบัติและการใช้ชีวิต
Thanks for your videos mate! cheers from Tasmania, Australia
You're welcome Liam! More are in the works...
Heya, man. I'm a new viewer and I want to say it's a delight to watch someone with machining skills working in a bright, clean shop and NOT abusing his tools.
After cutting aluminum, you deburred it using a sanding belt - I breathed a sigh of relief that you didn't go straight to a grinding wheel or a hand grinder with a cutoff wheel, like so many ppl do. I sharpened my wife's butcher knife on my belt sander and I've shaped styrofoam boat hulls using it - the sander, not the knife.
Just wanted to put that out there, that someone is noticing. Dad was a Tool & Die Maker/machinist & made sure to pass on good practices.
But I still haven't seen you use a file yet, so you're still on the fence haha!
Don't get me started on the proper filing debate! Push-lift-push or push-pull push....
Thanks for longer form video, love how the electric conversion is going!
Great tutorial Scott!!
Thank you!
I’m inspired now! This is some great content!
Thanks... Now go build a boat!
Thank you for these vids....seriously!!!
You're welcome, seriously!
That's what I did, then she told me to go sleep in the car.
So I went😄😄
Totally enjoy your vids.
Ha haaaa! Awesome! Bet it was worth it...
Your videos have truly been inspiring and life saving man especially on my gasser stuff even though I only sport race but I really don't see any serious racers using your tricks haha still running all that heavy stuff big t bars and oilers etc full stainless beefy hardware I think I should keep you to myself mate haha greetings from Australia and even re watching videos
Time to go on a diet!
@@M5PerfHydros big time mate as soon as I get her back home haha and already ordered aluminium screws !
Great work
Thank you!
Great video. One day I will build my 53” Cat.
Get after it!
All good stuff. 🤙🏼
Thanks! More on the way...
nice!
Always be thinkin.
Like most days I woke up much to early, thinkin' again
Pack the tubing with talcom powder or very fine sand when you bend it, that will help it from deforming.
3:45 i have the feeling im watching a AVE video about rc boats. God i love this channel😄
Me too... It's my favorite! 😆
Very cool.
😎
I've always thought the water inlets were on the wrong side, not facing the water in the turns.
And you would be right!
I get by with my old Taig mini late with mill attachment.
Love it!
Our P Sports are pulling over 4G in the turns. I'm keeping my heavy hardware.
You got me wondering if you can make parts for a Kyosho Jetstream 800 now👍👍👍
Maybe, but YOU can do it!
I don't really have the skill or the equipment to do what you do you're awesome👍👍👍
Thanks but don't count yourself out... My first efforts at building boats were terrible! Start small and you'll learn over time. Stick around... Lots more video help is on the way
I usually put black sharpie where I lay out a hole so the drill bit makes the mark easier to see.
Not silly at all and I shave every gram I can because that’s what we deal with on scale builds instead of pounds on real boats👍When I did cars we would take door panels out and cut steel out where not needed😀Street sleepers and apply the same concepts on my rc builds!We are racing these😀
There you go!
any preference between 304 stainless or 316 stainless? The 316 has better corrosion resistance but is about 2x expensive.
316 would shine in really corrosive environments like salt water, but for our purposes the easier machinability and lower cost of 304 make it the way to go
Hello I. Just Wondered Why You Didn't Put A Water Pickup Underneath The Hull Of Your Radio Controlled Boat. Still A Wonderful Boat Did A Great Job On The R/C Boat.
I know, right? Here's the thing... a water pickup on the bottom of the hull works only if the hull is in the water. This works great for a typical boat, but not at all for a hydroplane which spends a majority of it's time up out of the water!
@@M5PerfHydros I. Have Know People To Make A Bigger Whole Rudder For Water Pickup When They Buy Rudder From The Buyer Not Enough Water To Cool Down The Motor.
@@M5PerfHydros Do You Scott Make Your Own R/C Boat Propeller.
Nope, mine come from Ukraine
I'm intrigued by the water pickups. The new rudder has both water pickups cut out on the left side of the rudder? If you're oval racing you're always turning right, does that create a low pressure on the left side of the rudder? Would it make sense to cut a pick up on both sides of the rudder? Would it make it weak? Create drag?
Hang tight... I'm thinking we'll talk about all this in a video soon
Low Pressure is the inside, turning right, the rudder is forced laterally left creating pressure left side of the rudder. The right/inside becomes extremely dirty/turbulant.
Where do you buy the aluminum screws? Great video!
Fastener Express! Check them out here;
www.fastener-express.com/
@@M5PerfHydros Thank you!!
So do you use the aluminum screws on the strut? Building a Sport 40 and just what to make sure that is what you did. Thanks again for your tips! 👍
Yes on the strut mounting bolts, but I stay with steel for the pinch bolt
You should trademark your " better- lighter- faster " saying t shirts perhaps
I like it!
Did you drill both pick ups on the rudder to 1/8", or just the back one?
Poke 'em both
PC building tip, use high temperature rod to hold the tube shape while bending.
Not sure I understand
@@M5PerfHydros i will try to explain it. In the video you mentioned a issue kinking the stainless rods for fuel tank lines. a popular option for water cooling a computers is Acrylic tubing but has to be heated to bend and high temperature silicone bar rod is to prevent the tubing from collapsing. It should work with the stainless and you could even heat it help the bend. If you still can't smell what I'm stepping in I could try to link a video.
I see how that might work for acrylic where the material being heated and bent is weaker than the silicone, but in the case of steel tubing the opposite is true, which would surely result in kinking, wouldn't you say?
@@M5PerfHydros using a brake line bender is the only way I see it working.
Another option would be to taking pie cuts to make the bend tighter and filling gaps with solder or epoxy.
I never said I couldn't do it, just that it's tricky! I use a set of brass dies that I turned on the lathe, and when I'm being properly patient I can get crazy small, perfect radius bends
Need some room? Park the wife's car in the street, and you're good to go! 🤣🤣🤣
That's why cars have roll-up windows!
Nylon screws are useful too
Yep! That's what I used to use but switched to aluminum because they look cooler!
@@M5PerfHydros Can't argue with that!
Where do you get your aluminum hardware from sir?
Most of the hardware I build myself, but the stuff I don't make (strut, rudder) I get from Bill Brandt at Rattlesnake RC www.allrc1.com
If the hole comes right to the front edge, it still gets water on right turns.
I got thoughts on that.... Future video
Are you selling them Sir?
Nope, none for sale at this time
As they say in the Military: Oz equals lbs! "One pound on your feet equals five pounds on your back." "One pound on your feet equals 5% more energy expended." "Every 1% of your body weight in your pack makes you six seconds slower per mile." And all that is at 1:1 scale, not at "micro SCALES"!
You think you could solder a flex shaft to a stub with that silverbright
Though I haven't soldered to a stub, I have soldered flex shafts to collets many times - no problem!
@@M5PerfHydros love the videos. Iv learned a lot from you. Rc boating can be discouraging when you do it alone.
Roll pin
why not just drill the pin from both ends Scott to lighten it
Hardened steel... Tough to drill!
Dude u have the slots on the bottom of the rudder miss orientated yo understand for real I'm dennis