OH A NOTE ABOUT THE MILWAUKEE USB 3.0 RED LITHIUM LIGHTS AND BATTERIES WHICH IS DO NOT TWIST THE CAP OFF AND POP YOUR BATTERY OUT OR ANOTHER BATTERY IN WHILE IT IS STILL IN THE ON POSITION IT WILL THEN CAUSE YOUR TOOL LIGHT TO BLINK AND IT WILL NEVER WORK CORRECTLY AGAIN UNTIL YOU SEND IT OFF JUST THOUGHT YOU SHOULD KNOW TRY YOUR OWN RISK
I worked for a company who went to the Milwaukee helmet. Class 2. They did not have vents and the other dislike was no full brim. I'm in Oregon, the drim all the way around here keep rain off your neck and in your jacket.
You bring up some good points that I never considered. I just checked the Milwaukee website and they now offer full brim helmets either vented or non-vented. I know that feeling of water getting in your jacket. As a builder, I definitely don't like the winter days where the melted snow is dripping off the roof when you're working near the overhang.
They also make that PPE neon green shader that goes around the entire hat as well. Kind of like a big safety 10 gallon hat. But I think the entire point of it is that Milwaukee makes it modular so you can just get what you need as you go. I will have to say I did think that originally $110 for a hard hat was ridiculous and seeing as I don't really need one even though I do tree work I have the more traditional style bolt helmet and it was just fine. Funny thing is I paid $40 for my helmet and then went to and Ollie's two and a half weeks later and saw them on the shelf for 12 bucks lol
The reason they are swapping to that style hard hat is because most injuries on job sites believe it or not happen because when someone falls their hard hat also falls off and then they hit their head on whatever. I talked to a foreman on a site last year and was asking him about this and what was up with it and asking if I needed to go ahead and jump to the new type helmets but considering how expensive they're going to be from what I understood more or less you should be able to just get a new harness on the inside of your hard hat that would allow you to have a chin strap. Because it's more or less going to be good enough depending on the field the type of work and just you know many different little factors. But for your average construction worker probably not a big deal. I was actually unaware of that most injuries occur because of hard hats falling off before people hit the ground.
Also the lens visor in my opinion isn't that great. What could have made it really top notch was putting some sort of padding around the bottom portion and where your nose sits whether it be just some memory foam weather stripping or something or a gasket or something along those lines that would allow you to more comfortably have it closer to your face so you wouldn't have all that area for potential debris to get underneath and get around. And that plastic is not comfortable up against areas where there's little skin and muscle and fat such as the bridge of your nose. It does feel a little weird wearing it too but that's just me. I ended up taking mine back because I noticed it it was getting scuffed up pretty easily trying to raise it lower it when getting used to using it. I returned it and order the stainless steel screen mesh instead.
I haven't used the sunshade in awhile, but I recall the sunshade going in the back hole and the earmuffs in the center. I seem to recall the earmuffs being more comfortable when I put them in the back.
What accessories would add to your hard hat? Is there anything else you would like to see offered?
Thanks for clarifying the two mesh face shields, and actually showing us that one is wider than the other!
You bet! I have another short video showing some updates for these helmets. Stay tuned for it next week.
OH A NOTE ABOUT THE MILWAUKEE USB 3.0 RED LITHIUM LIGHTS AND BATTERIES WHICH IS DO NOT TWIST THE CAP OFF AND POP YOUR BATTERY OUT OR ANOTHER BATTERY IN WHILE IT IS STILL IN THE ON POSITION IT WILL THEN CAUSE YOUR TOOL LIGHT TO BLINK AND IT WILL NEVER WORK CORRECTLY AGAIN UNTIL YOU SEND IT OFF JUST THOUGHT YOU SHOULD KNOW TRY YOUR OWN RISK
Awesome! Makes me want to go out and cut some branches/ prune some trees!
Haha, that's cool! I need to get out there too, once the ground dries up a little.
I worked for a company who went to the Milwaukee helmet. Class 2. They did not have vents and the other dislike was no full brim. I'm in Oregon, the drim all the way around here keep rain off your neck and in your jacket.
You bring up some good points that I never considered. I just checked the Milwaukee website and they now offer full brim helmets either vented or non-vented.
I know that feeling of water getting in your jacket. As a builder, I definitely don't like the winter days where the melted snow is dripping off the roof when you're working near the overhang.
@@MarkThomasBuilder I bought the Wavcel T2 max hardhat. Was $200 but I liked it. The vents are designed to not let water in but heat out
@@markbroad119 That's cool, I'll have to take a look at them.
They also make that PPE neon green shader that goes around the entire hat as well. Kind of like a big safety 10 gallon hat. But I think the entire point of it is that Milwaukee makes it modular so you can just get what you need as you go. I will have to say I did think that originally $110 for a hard hat was ridiculous and seeing as I don't really need one even though I do tree work I have the more traditional style bolt helmet and it was just fine. Funny thing is I paid $40 for my helmet and then went to and Ollie's two and a half weeks later and saw them on the shelf for 12 bucks lol
The reason they are swapping to that style hard hat is because most injuries on job sites believe it or not happen because when someone falls their hard hat also falls off and then they hit their head on whatever. I talked to a foreman on a site last year and was asking him about this and what was up with it and asking if I needed to go ahead and jump to the new type helmets but considering how expensive they're going to be from what I understood more or less you should be able to just get a new harness on the inside of your hard hat that would allow you to have a chin strap. Because it's more or less going to be good enough depending on the field the type of work and just you know many different little factors. But for your average construction worker probably not a big deal. I was actually unaware of that most injuries occur because of hard hats falling off before people hit the ground.
Also the lens visor in my opinion isn't that great. What could have made it really top notch was putting some sort of padding around the bottom portion and where your nose sits whether it be just some memory foam weather stripping or something or a gasket or something along those lines that would allow you to more comfortably have it closer to your face so you wouldn't have all that area for potential debris to get underneath and get around. And that plastic is not comfortable up against areas where there's little skin and muscle and fat such as the bridge of your nose. It does feel a little weird wearing it too but that's just me. I ended up taking mine back because I noticed it it was getting scuffed up pretty easily trying to raise it lower it when getting used to using it. I returned it and order the stainless steel screen mesh instead.
Can the mesh and clear face shields be used simultaneously with the headlamp? Looks like they'll hang up when lifting the shield.
It was very interesting my friend. Thankful👏👏👏👍👍
Awesome, glad you like it!🙌
Love the video. Definitely thinking about getting a Milwaukee
Here's another upgrade Milwaukee is making to their safety helmets... th-cam.com/video/RFiGbk_SO_M/w-d-xo.html
The ear muffs go in the center hole, and so does that sunshade. How does that work?
I haven't used the sunshade in awhile, but I recall the sunshade going in the back hole and the earmuffs in the center. I seem to recall the earmuffs being more comfortable when I put them in the back.
BOLT saftey glasses fit to other cheaper BOLT hard hat ?
Great review, been looking at one of these.
I highly recommend any of these Milwaukee accessories.
Good stuff, thanks for this video!!
You bet, glad to hear it!👍
Sheesh that must be a heavy hard hat with that 600 headlamp
It's balanced pretty nice with the battery in the back and the light in the front.
Can you use the universal lamp mount and the eye visor at the same time?
I haven't tried it but it looks like no problem. The LED seems to work with everything I tried with it.
Super dave Osborn
Will this work with the sun visor that has the shade extended brim around the whole hard hat ??
Yes, check the Home Depot website and you'll see an animated video that adds accessories to a brimmed helmet.
Here in EU out glasses goes inside our helmets, this is just stupid and bulcky
Here in the US we do safety squints. Glasses are stupid and bulky.
@@urboytony5028 in china they do that 24/7, so it must be good
You're 🔥 d