I am getting consistent flyers. Even after mailing it back for warranty and waiting 6 months. I have ordered a re-crowning set as the last 1" of bore and crown look terrible. I will cut and re-crown then bed as shown in this video. I hope it fixes the issue, as Bergara will not. I have tried various quality mounts/optics, hundreds of dollars worth of various premium ammos and patient cold bore shooting. I am still getting consistent 3" flyers at 100m. Thanks to Island Outfitters in Victoria for their support.
@@LSC2001 Yeah. I have a B-14 HMR in 308. Basically the best I have been able to squeeze out of it even with handloads is 1 MOA. My Tikka CTR on the other hand shoots
yo tengo un tikka t3x superlite y la legüeta no viene unida a la acción, la lengüeta esta incrustada en la culata y la acción trae un resaque donde entra un poco. en esos casos como se le puede hacer.??
50 lbs screw torque seems like too much. May torque.twist the action. Like, preliminarily, the lesser several, clamps on the entire action method. IE wood clamps with at standard.
A lot of folks are reporting consistent fliers with Bergara. I bet there are machine tolerance issues with recoil lug. This is a good solution
Gracias! Effectivo, elegante, y excellente!
Gracias Rafa, gran trabajo 👏. Es una placer mejorar nuestro arco para que el indio tenga mejores prestaciones.
I am getting consistent flyers. Even after mailing it back for warranty and waiting 6 months. I have ordered a re-crowning set as the last 1" of bore and crown look terrible. I will cut and re-crown then bed as shown in this video. I hope it fixes the issue, as Bergara will not. I have tried various quality mounts/optics, hundreds of dollars worth of various premium ammos and patient cold bore shooting. I am still getting consistent 3" flyers at 100m. Thanks to Island Outfitters in Victoria for their support.
Great Advice! more videos like this one please. Thanks Rafa!
Excelente consejo! Por favor más vídeos como este! Graciñas Rafa!
Gracias maestro yo se lo haré pero el culata de madera
Se te olvidó después con papel de lija limpia el Exceso the apoxy para que no tengas high spots
Gran truco y consejo😀
Sinceramente no entiendo que algo tan sencillo y dando por hecho que sea tan efectivo como indica Rafael Carrillo, no lo traigan hecho de fábrica.-
Esto lo puedes aplicar a cualquier marca y modelo rifle?
They oversprayed when painting my HMR wilderness stock onto the bedding chassis. Had to sand the paint off. Common problem.
And did this solve the problem?
@@jonasvanwesel1316 I didn’t notice much of an improvement. The rifle groups decent but inconsistently.
@@LSC2001 Yeah. I have a B-14 HMR in 308. Basically the best I have been able to squeeze out of it even with handloads is 1 MOA. My Tikka CTR on the other hand shoots
Скорее всего,я тоже сделаю себе беддинг на своей Bergare B14 Sporter Varmint.
yo tengo un tikka t3x superlite y la legüeta no viene unida a la acción, la lengüeta esta incrustada en la culata y la acción trae un resaque donde entra un poco. en esos casos como se le puede hacer.??
¿Sé puede hacer en culata de madera?¿Ahí que volver a poner a tiró el rifle? gracias
Si claro, se puede hacer en una culata de madera, y tienes que volver a ponerlo a tiro
🙋♂️.. Gracias x el consejo.. Se lo haré al mío... Más consejos x favor!!.. Y ¿ vale también para rifles semiaumaticos?.. Un abrazo desde Tenerife..
No, para semiautomáticos no vale
Our barrels make the difference 😁😁
Do they? I have a B-14 HMR in 308 that barely shoots under 1 MOA. My Tikka CTR shoots
Una vez echo el encaje hay q volver a ponerlo a tiro
Si, puede variar el punto de impacto
Is this only necessary on the cheaper lines? I ordered a B14 Crest and I don´t wanna mess with bedding...
Even in high end rifles unless the action is already bedded to the chassis- bedding your rifle properly will only improve consistent accuracy.
What is the equivalent product he uses to bed the recoil lug in the US market?
Jb products jb weld
Holaa se nota mucho??
siempre es algo que suma a la precisión de nuestros rifles
👍👍👍🤝🤝🤝
Would like to hear this in English language.
Hi @firstglass1! you can use CC auto-translate option to have subtitles in any language.
@@bergarainternational Fantastic
Wish I knew what he was saying
Read firstglass1 reply
50 lbs screw torque seems like too much. May torque.twist the action. Like, preliminarily, the lesser several, clamps on the entire action method. IE wood clamps with at standard.
Inch pounds not ft pounds.
What a terrible job. Straight hacker!