is the see-through cover uv protected? Also, is there room to add/remove the printer hood, or do you have to have it working without the hood inside for access?
I don't know if the window is UV material. Its in a room with a window and haven't experienced any problems printing; will say no direct sunlight hits the cover. And yes I removed the cover of the printer, no need or it with the enclosure (enclosure is too small to use with the enclosure because it would need to be about double in height).
I did the same with my ventilation kit, however wouldn't you want the filter? If I'm not mistaken the filter inhibiting airflow may be a good thing as it would still allow for a higher chamber tent for the resin to print in ideal temps while also filtering the smell instead of just moving the smell from the chamber to your room
Thanks for watching. That is something to consider but I vent everything to the outside so its not a big deal. As far as the airflow I balance that out with the chamber heater settings so it doesn't get cold and mess up the printing. Kind of a balancing act but its a one time setting so its good now.
Good question. Yes Amazon delivers to Korea with free shipping IF the amount is $49 or more. But remember there are possible import fees for items over $150.
this was super helpful 😎
Thanks for watching.
is the see-through cover uv protected? Also, is there room to add/remove the printer hood, or do you have to have it working without the hood inside for access?
I don't know if the window is UV material. Its in a room with a window and haven't experienced any problems printing; will say no direct sunlight hits the cover. And yes I removed the cover of the printer, no need or it with the enclosure (enclosure is too small to use with the enclosure because it would need to be about double in height).
@@theVariedLife What is the diameter of the hose?
I did the same with my ventilation kit, however wouldn't you want the filter?
If I'm not mistaken the filter inhibiting airflow may be a good thing as it would still allow for a higher chamber tent for the resin to print in ideal temps while also filtering the smell instead of just moving the smell from the chamber to your room
Thanks for watching. That is something to consider but I vent everything to the outside so its not a big deal. As far as the airflow I balance that out with the chamber heater settings so it doesn't get cold and mess up the printing. Kind of a balancing act but its a one time setting so its good now.
What about the zipper? Does it close tightly? Doesn't it allow air to pass through?
Zipper seems to do well and with the fan. I have not noticed any fumes coming through the zipper.
I mean, the first part could have been a little slower for little old me :( difficult to pause and zoom too. But thanks for video!
You can go to the settings gear icon below and adjust the speed of the video to help with that.
If you are an amazon prime customer is shipping still free to Korea?
Good question. Yes Amazon delivers to Korea with free shipping IF the amount is $49 or more. But remember there are possible import fees for items over $150.
You are going to need a bigger room!
Maybe if I'm not careful. ;)