Honda Ruckus / Zoomer 50 CVT Installation (belt, sliders, variators, clutch) Mitch's Scooter Stuff
ฝัง
- เผยแพร่เมื่อ 11 พ.ย. 2018
- In this video I show you how to install CVT parts (belt, sliders, variators, clutch) back on Honda Ruckus / Zoomer 50cc scooter.
New parts I replaced:
Drive belt - amzn.to/2Dx83R2
Sliders 6.5g - amzn.to/2PQb6JY
Tools I used:
Ratchet - amzn.to/2RIazHg
extension - amzn.to/2ARFqf2
8mm socket - amzn.to/2D9JLvn
10mm socket - amzn.to/2D8VgTO
14mm socket - amzn.to/2ASUs45
17mm socket - amzn.to/2SUYno7
Clutch holder - amzn.to/2DaMm8F
Torque wrench - amzn.to/2DBCANV
Step 2 and 3 videos:
CVT Removal - • Honda Ruckus / Zoomer ...
CVT Parts Inspection - • Honda Ruckus / Zoomer ...
CVT Installation - • Honda Ruckus / Zoomer ...
Need clutch assembly kit? Grab one here - amzn.to/3NjOk6Y
Honda Ruckus 50 videos: bit.ly/2u8pNhP
SHOP ALL SCOOTER TOOLS AND GEAR I USE: amzn.to/2CbqQku
Want more free Scooter Tip / Tutorial videos - Please support MicBergsma!
Paypal donation: bit.ly/2fghrwN
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact:
hire.micbergsma@gmail.com
*******************************************************
TH-cam - 2nd channel - bit.ly/2g4i5d5
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
******************************************************
Austin, Texas
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
#mitchsscooterstuff #hondaruckus #hondazoomer - ยานยนต์และพาหนะ
New parts I replaced:
Drive belt - amzn.to/2Dx83R2
Sliders 6.5g - amzn.to/2PQb6JY
Tools I used:
Ratchet - amzn.to/2RIazHg
extension - amzn.to/2ARFqf2
8mm socket - amzn.to/2D9JLvn
10mm socket - amzn.to/2D8VgTO
14mm socket - amzn.to/2ASUs45
17mm socket - amzn.to/2SUYno7
Clutch holder - amzn.to/2DaMm8F
Torque wrench - amzn.to/2DBCANV
How do slider weights compare to rollers? Would you say go with 6.5g sliders if you had 7.5g rollers in?
Do you have a link for a replacement clutch assembly on amazon or know of another online parts store that sells one?
@@andrewwawiorka5041 Hey Andrew, I just added a new link in description and in amazon store... the brand is NCY
How many miles does one get on a Ruckus drive belt ?
Without a doubt Mitch makes the best instructional video's. Detailed without extraneous distractions.
Hey thank you so much!
Mitch, your videos have given me so much confidence to work on my Ruckus, started to learn from scratch a year ago! No one is putting out this kind of quality like you. Thank you so much.. hope to see more videos on the Ruckus in the future.
Great to hear! 😄🙌🏼 yes planning to post more ruckus videos 😄👍🏼
I really want to get a ruckus, this guy is provoking me into getting one lol
Zen and the art of scooter maintenance.
Thanks for making this video! My Ruckus was having an issue with the drive face nut walking out because I overtightenen it after some tuning and caused the threads to strip.
Thanks to this video (and some replacement parts), it's properly torqued, and running great now. I couldn't have done it without you! Truly, this helped so much and I am immensely grateful to you, Mitch!
No music No funny comments No BS just plain good know how Kudos to Mitch
Great tutorial , have watched a few clips about changing the drive belt from other people , you use the correct tools and made sure that the belt sits properly and doesn't get pinched before you tighten the variator nut with a torque wrench to the correct tension, impact drivers are not a good idea as you can strip the thread.
Just love watching your videos -so easy to follow along . All the information we need; nothing we don’t . Fun to work on our own bike!! You rock!!😎
Nice! I learned a lot from your videos. Your videos kept me awake until 3 in the morning. Keep posting a maintenance and tutorial videos specially for honda ruckus. Great job sir!
Mitch's Scooter Stuff videos are the best. I've watch almost all of his videos. Very informative and not a waste of time like the other videos I've watched. Thank You, Mitch.
Thank you Mitch you are helping me tuning my ruckus up with those videos.
Thanks so much Mitch. I used to watch your videos before I owned a Honda Ruckus…now I own one. You’re videos are a great help!
😄👍🏼🙌🏼
Id love to see a video showing how to replace a broken kickstarter spring.
The way you said rotate the pulley until nut is fully sit in well is definitely correct way. As you know some shop mech dont do the way properly , in the end, nut not sit in well and pulley come out and spoil the threading have to replace new crankshaft.
Best channel for scooter repairs on TH-cam.
With Mitch's tutorial Ruckus videos even a stoner like me can do these mods & save hundreds of dollars so thanks Mitch, 4:20 brother!
Haha thanks man!
Brilliant video, always so clearly explained.
The man yet again, thank you dude, life saver!!
Mitch answers questions. Im a subscriber. I will be doing some mods soon and this is the place to learn. OUTSTANDING
😄🙌🏼🙌🏼
One of the best tutorials I've seen.
good stuff, great tutorial video.
Awesome video. You really do a great job.....
mitch you are the bomb
Mitch, really enjoy your videos. They are clear and precise. I want to change out my drive belt on my Ruckus. You had a scanner wrench that helped you hold to the clutch housing and the variator from spinning. Where can i get one of those. It would help a lot with the installation. Thanks again.
Thank you! I have list of tools in description, click on link that's where you can get
Always the best! Thanks
😁🙌🏼
Great video Bud - To the point and easy to understand with some great tips (don't pinch the belt :-) ) Thank you.
Thank you so much 😊
You have a great day.
I love 💕 Hawaii.
Mahalo.~~~
You are a genius!!
Hi Mitch big fan! How do you ensure that the nut is properly tensioned on the crankshaft for the variator since the belt can get in the way.
Thank you sir!!
Top notch! Thanks
🙌🏼🙌🏼
Mitch, On a 2009 Yamaha Vino 125 scooter do I first have to drain the engine oil to remove the drive belt and clutch pulley cover? because the oil sight glass is there.
Good vid
Mitch, thanks for this awesome video. I am about to do this on my 07 Reflex. I assume the process will be (fairly) similar. It looks like one of the nuts in your video had some blue threadlocker on it. Do you recommend using threadlocker?
Hi Mitch thanks for all your videos. I been messing around with sliders in original variator and they got flat spots. Also now there is chatter from kickstarter rubbing on kickstarter washer.. it's starting to wear the teeth down. I've taken it apart and put rollers back in and tried to be extra certain of everything but still chattering?? If I bump the kickstarter arm with my heel while riding it goes away for a second but then returns. I don't know what to do.
Any advice?
Thanks again.
saya dari indonesia, saya melihat konten bapa ini sangat bermanfaat, terimakasih tutorialnya
What tool would help take clutch apart to change clutch pads?
Nice
Ok, Mitch
So I see what I was doing wrong, thank you.
I tell you Mitch, if it was not for your instructional training videos. I would have thrown in the towel along time ago.
Oh long should a new belt last, with normal residential driving ?
Thanks Again
My Friend
Greg Whitacre Alaska
Question: I have a 2003 Honda Metropolitan CHF50P, which is restricted to the 25mph speed. Is it true, one can remove a washer from the CVT to increase the speed comparable to the CHF50?
how do you know what size wieghts to use.. im about 200-210 pounds
Hello can you please help me?
I stripped the screw that holds the band. The one where you last put the nut. Do you have a video on how to replace it?
Hi, I noticed there is no screw/nut on the front of the clutch, so I want to change the shoes/pads, whats the trick or vid to watch, thanks
thanks!
Hi Mitch great video question I have a kymco people 150 I’m doing my belt -do you have to put grease on the rollers
allan Shuben thanks! No grease
surface cleaning and no lubrication on the shafts??
Hello Mitch,
I recently ordered a clutch kit from Amazon for a 05 Honda Metropolitan 50 cc scooter and found the clutch pully does not fit. In comparison to the stock clutch, the new clutch has a lip on the back which rubs on the transmission case. In reviewing your video, I noticed the clutch you installed does not have a lip on the back of the driven pully. I've searched online and cant seem to find the clutch you installed which seems to mirror mine. Can you point me in the right direction please? I did review the clutch kit on the amazon link you posted but that also seems to have a lip on the back of the driven pully and worry it would not work.
Is this ASMR or ruck tutorial?..... killing it on both
Hi. I have a Honda Dio AF68 from Japan. In the crankcase it looks very similar to yours. But currently I'm facing the issue that the spline on the engine crankshaft (the left one) is worn and the outer drive face as well as the kick starter ratchet don't lock in place. They now rotate freely and the bike doesn't drive anymore. Do you have any suggestions? Do I have to replace the entire crankshaft because of that worn? Thanks a lot
My variator bolt unscrewed it self twice.i feel like I'm doing everything right.any suggestions.maybe loctite on the variator bolt
Try tightening the nut with a impact drill.
Hey man I just subscribed to your channel and I noticed you work on a lot of Honda elite 50s I have an old 88 that I replaced the belt on and now it's either acting like it's choking out or dragging I'm not sure because I've never had a scooter before and how do I adjust and clean the carburetor on this two-stroke
Hey welcome to my channel! When you installed the new belt, did you carefully install the variator with rollers or sliders in without having them falling out of position? Are rollers / sliders in good shape?
Does the spacer not need any grease? It looks like there was some dried up grease from factory installation (dark red stuff).
Oil and belt dust most likely. There’s a oil seal around that shaft and it sometimes leaks a bit, I just replaced an old one that was leaking badly
Long time. No see you
And where did you get that tool you're using to lock the variator and starter up with to take the bolts off and where did you get it
Link in description :)
The area inside the cover of my ruckus is filthy. Is it safe to use parts cleaner to clean it up or is that too harsh? Thanks!!
I would do air compressor with blow gun but brake part cleaner would be okay
I have just put a new fan plate front plate on my variator tighten it down but found a small amount of looseness on the spline is this due to wear on the shaft
Oh man be careful, I had to pull the engine out on another ruckus to replace the crankshaft with damaged splines 😮
@@MitchsScooterStuff with the fan plate being made of aluminium as they heat up with friction they should tighten on the spline now I think about it . I must say I find variator,s a hole new world . Many thanks
Hi. What size is the torque wrench? 3/8 - 1/2 - 3/4? Thank you for everything 🎉
Hey I have 1/2 but 3/8 will work perfect for this scooter
@@MitchsScooterStuff Ok. Thank you. I already bought the 1/2 and it’s fine. 🤙🏼
Hell yeah
Dang Mitch, F’n Amazon. I try to hook on from your site so u get credit ( I hope). I dont see the 6.5 slidders. Im just letting u know. Ill find em thx to you. Id be all messed up w/o you. I dont have pay pall. They be robbing folks in prison/Jail anyway. I got cash app tho. Dude i hope u get compensated for ur kick ass videos.
B