Very interesting video and it's helped me adjust my variator to get better speed on my hyosung sf50 2t with no mods except for a washer and taking off the limiter on the CD I am able to reach 40 miles an hour and I reach 30 miles an hour in about 4 to 5 seconds. So thank you.
Thank you so much for the video! I added a washer on my scooter's variator and the acceleration is significantly better. Apparently my mechanic had removed it because he thought it was useless and since then I was under the impression that I had gained more weight than I thought resulting in poor acceleration 🤣🤣
I've been searching the internet for over a year on how to fix my kid's 4 wheeler. It just didn't seem like the belt was getting the right tension it needed. Didn't know that part was missing a washer until I found this video... To the store I go.
Hi man. Thanks for this vid. I think the belt on my stage6 variator sits a bit higher because it doesn't have the washer, just the boss itself. Probably the reason why i don't have enough acceleration and power from a stop when going uphill. Plus the belt on the rear pulley is not situated on the topmost edge of the pulley but a bit under. So is it why everytine i go up a hill fron a complete stop, i couldn't pull away because it felt like starting on the second gear? And by the way man, will i not lose my kickstart if i pkace that shim washer? Thanks
I'm installing a new v belt and the primary and secondary spin freely with the cover off, but when I put the cover on, the kickstarter jams. Any ideas? I had to remove the primary cover and wrap the belt around the shaft, then retightened it. I don't believe the belt is resting on that collar. Could that be the issue? I believe the collar was pretty much pushed most of the way inward. I think maybe the belt is pinched and the cover is not seated fully, which is causing the kickstarter gears to jam so that the kick start lever cannot return to the up positions. Need help!
Question, mine had a plastic ring (restrictor for 50cc). I removed it based on the other videos, and instantly was able to go upto 40mph (before was restricted to 30mph). Will removing that affect anything else? Mine does not have a groove for washer...thanks!
Could any of this, or maybe something with the clutch bell cause really bad shuddering when accelerating in the low end? I have a 2004 Aprilia Atlantic... it is my first scooter, and from all the great things I hear about it, something is wrong with mine. I live in Italy. So, talking to mechanics is difficult to say the least.
i have a piaggio nrg first model on the market year 1995. i have malossi complete overrange kit and i cant install washers becouse if i do i cant make the star of the pulley to get in the shreds of the crankshaft to get the right assembly. and this happends becouse i use a pulley original. do i have to use a malossi pulley and respectivly star to use washers to get the belt high in rear pulley? i see that when i trie to mount the front pulley the belt is siting high in the rear pulley. but when i trie to assembly the front pulley, she does fit but not in the right way. belt is more thick and pulley gets unheven in rotation. what do i do !? i had the same problem with a front pulley stage6 that got ruined. :(
Hello sir I recently chsnged my drive belt on a 2013 50cc Yamaha Zuma moped and when I take off from a dead stop it bogs down as if the belt has slipped what could be the cause?
I need some idea why i loss my top speed. Initially the stock top speed is 120kmh then i chg to heavier Dr. Pully that has edges roller weight from 13g to 13.5g. I gain top speed to 132kmh.. but now its gradually decrease the top speed after 1000-2000km mileage and now the top speed is around 124kmh.. can you explain?
For those newbies, the thin adjustment washer seems to be confused with a restrictor washer which it is not. Restrictor washers are much thicker and are on the drive boss, (where the teeth of the belt touches). As the belt gets worn/skinny, you pull the washer(s) out to gain back top end. When belt is too thin for adjustment, you get a new belt. Use the right size washer to fit the new belt correctly.
could u help me? like i own aprilia sr 50 2020, when i drive at 50kmh like the belt goes up and down and it its rly annoying. but below 50 or more then 50 its perfectly fine. does someone know how to fix it?
Great explanation- thanks 1 I've a Yamaha Majesty 250, and after fitting a new drive belt it's slow moving off, but great in the other ranges, so I think I left the washer out!
Greetings from Greece!! I have a '06 runner vxr 200cc, but I have some problems. I changed my drive belt at 40000km normally and I began to lose power. I lost at least 1000rpm during clutching when I pull full throttle from stop. I've lost all my acceleration power after that service.. :( What do you propose I sould do to fix that? Is a different manufacturers drive belt able to do that much change? I don't know if the mechanic put a washer just as you in the video. What is your opinion? Thanx a lot. (Sorry for my English)
He probably changed to heavier rollers which will cause the belt to move to a higher speed before the clutch engages. You should have taken it back and had it done right.
I have like 5 mm of vairator left at top end that the belt is not running on how do I make it ride higher its a yamaha jog rr with 70cc kit 5.2g rollers stiffrt contra spring? Race exhaust thanks
My belt i think is rubbing on the starter gear just above the variator I’m using 6g weights and stock clutch so don’t know what’s going on I do have a pwk 21 carborator and a 90cc BBK for it so it might be too much for that belt and it goes beyond the threshold
I changed my drive belt and clutch.my bike was going 90 mph.running real smooth.well one of my idiot neighbors jammed my kick-start totally backwards.i fixed it again. I thought.but now it won't start.i think the cat is too tight.any thoughts. I'm gonna take it apart again today.and loosen it up a little
Had a belt snap and changed out pretty much all of my cvt while i was putting a new one on, new pulleys front and rear, new clutch shoes, new contra spring, clutch springs, rollers etc Problem I have now is my belt is sitting low in the rear pulley, will the washers help with that?
Very small detail that can fix gigantic issue, thanks for the info. I'm looking for a solution on why my Yamaha Aerox is vibrating & dragging a bit. This could help thanks :D
Dose the adjustment washer kit work on a taotao50 scooter? Cuz I I think I have bad slipping or something and my power is low, I've replaced everything around the belt with new parts and I still get a burning rubber smell and a lot of heat build up on the variator part of the hub thing... I think this may solve my problem but I sure it's for only one pacific brand of scooter kind of thing...
Its for the kickstart.. if you look in your belt cover theres a piece that mirrors the piece you asking about. When you kick start the piece in cover spins and shoots towards the piece on crank, they interlock and rotate the engine. The cover side piece returns to its lowest point once you release the kick start lever.. if you like having another way to start your engine incase battery dies, then yes you need it.
im about to purchase one that has acceleration problem . he had someone mess with it before it has low low miles and is slow on take off and fails to really pick up speed . wondering if its worth the 700 he want its literally got less that 200 miles on it . i cant remember the name of it tho lol
Hi, @Scoot tuning I own an Aprilia SR 150, and the thing is that one of my friends stupidly tried to 'launch' it. Meaning, holding the brakes and going almost full throttle for like 2-3 seconds, but of course that did not work out for him. Now, the thing is, when I accelerate,there seems to be a lag in the engine revving up and actually moving ahead instantly, like it used to. What exactly might have gone wrong and how can I fix it? Thanks
Hi, I have a problem with my scooter. It's a Piaggio Beverly 300 Tourer 2009. I just replaced myself the driving belt and the rollers on the variator, closed everything and then tested on the center stand. On idle rpm the rear wheel has an unusual spinning. I haven't actually done any distances in order for the new parts to settle, but this spinning concerns me a lot. The clutch bell nut and axis is moving as if the clutch is engaged at idle rpm and so is the wheel. What could be the problem? Have I tighten it more that required? Or belt is not installed/settled as you described in the video?
Your clutch springs are engaging to soon.. or you have a clearance issue between the bell and the clutch pads, (check compatibility of bell with clutch)
Same here mate, I have 125 liberty and it spins as soon as I start it, Changed belt, variator, rollers, springs as it has gone 70k kilometers 😂 Mechanic doesn't know what it is I don't either.. Have you managed to get it sorted and what was the issue???
If your talking about the alumininum piece with the fins, its the drive face plate, also serves as the cooling fan for the belt and clutch. The fins are fan blades. Its half a pulley, the variator slides towards it when the weights roll, pushing the belt out, changing the ratio. Gy6 50s are slightly different, theyre steel, have teeth around the edge for the starter to engage, and the cooling fan is a separate piece of plastic. (Cast aluminum with integrated fan type seems better than the gy6 50's plastic fan blades. the aluminum blades are taller and solid.. plastic fan blades are short and flimsy.
I put on a New Belt but it's really loose. How can I adjust this to be tighter? It's the Correct 729 belt for a 49cc Chinese scooter but Both are very loose. Can you help?
darryl keeney governor washer? I'm having the same problem. Seems like I'm not getting the same top speed I was getting before. Take of is still on point just top speed has gone down a LOT
Agr Mohamed Rabbani They fluctuate when running, the rear pinches in forcing the belt to a smaller gear ratio as the front opens up to a bigger ratio. There's videos of it in action on here. Look up gy6 belt slap I know there's a video that shows a case open showing that.
If your belt in the rear pulley is to low it gets higher in the front and your acceleration will be horrible adding a washer will make the front less tight allowing the belt to go lower in the front and therefore higher in the back to get best acceleration.
+Thomas Flynn This happened to me all the time. Replace your clutch / more lube for it. Easier to just buy a new one with lube already on it like mine had.
This is the only video that has explained the adjustment of the drivebelt. Awesome job guys!
Oh man... your video solved a problem that was bothering me for more than a year... I tried everything but this. Thank you!
I think this video just helped on a problem that I've been dealing with for about a year!!!!!!!
clicked on this video thinking that it wouldn't be very interesting. But I actually found it really interesting, which is interesting
Thanks! I've searched for way to long trying to figure out what was going wrong after i changed my belt. I think this will fix it. thanks for the vid!
a very good explanation; fast and to the point,thanks.
Very interesting video and it's helped me adjust my variator to get better speed on my hyosung sf50 2t with no mods except for a washer and taking off the limiter on the CD I am able to reach 40 miles an hour and I reach 30 miles an hour in about 4 to 5 seconds. So thank you.
Interesting fact! How something so small can be so important! Thanks
Thank you so much for the video! I added a washer on my scooter's variator and the acceleration is significantly better. Apparently my mechanic had removed it because he thought it was useless and since then I was under the impression that I had gained more weight than I thought resulting in poor acceleration 🤣🤣
I've been searching the internet for over a year on how to fix my kid's 4 wheeler. It just didn't seem like the belt was getting the right tension it needed. Didn't know that part was missing a washer until I found this video... To the store I go.
Thankyou for your videos they really helped me especially this one
so many really interesting washers!
Omg you've solved my problem lol cheers this great news 👍
Thank you so much! that really helped me out
Hi man. Thanks for this vid. I think the belt on my stage6 variator sits a bit higher because it doesn't have the washer, just the boss itself. Probably the reason why i don't have enough acceleration and power from a stop when going uphill. Plus the belt on the rear pulley is not situated on the topmost edge of the pulley but a bit under. So is it why everytine i go up a hill fron a complete stop, i couldn't pull away because it felt like starting on the second gear? And by the way man, will i not lose my kickstart if i pkace that shim washer? Thanks
This was very interesting...good video
Very informative video. Thank you.
Good explanation.
I wish this channel made more tuning vids
Thanks! Needed this
I'm installing a new v belt and the primary and secondary spin freely with the cover off, but when I put the cover on, the
kickstarter jams. Any ideas? I had to remove the primary cover and
wrap the belt around the shaft, then retightened it. I don't believe the belt is resting on that collar. Could that be the issue? I believe the collar was pretty much pushed most of the way inward. I think maybe the belt is pinched and the cover is not seated fully, which is causing the kickstarter gears to jam so that the kick start lever cannot return to the up positions. Need help!
Really interesting video. Really! :)
thanks a lot man you helped me!
Excellent 🎉, very well Explained, Good luck in da future 👍 👏 🎉
Question, mine had a plastic ring (restrictor for 50cc). I removed it based on the other videos, and instantly was able to go upto 40mph (before was restricted to 30mph). Will removing that affect anything else? Mine does not have a groove for washer...thanks!
0:58 Would it be harmful if I add extra washer or if my scooter doesn't have one, would it damage anything if I simply put one on anyways?
Well this video is really interesting
Hey i need help with replacing a belt for my scooter! Do you have a video for that please?
Could any of this, or maybe something with the clutch bell cause really bad shuddering when accelerating in the low end? I have a 2004 Aprilia Atlantic... it is my first scooter, and from all the great things I hear about it, something is wrong with mine. I live in Italy. So, talking to mechanics is difficult to say the least.
i have a piaggio nrg first model on the market year 1995. i have malossi complete overrange kit and i cant install washers becouse if i do i cant make the star of the pulley to get in the shreds of the crankshaft to get the right assembly. and this happends becouse i use a pulley original. do i have to use a malossi pulley and respectivly star to use washers to get the belt high in rear pulley? i see that when i trie to mount the front pulley the belt is siting high in the rear pulley. but when i trie to assembly the front pulley, she does fit but not in the right way. belt is more thick and pulley gets unheven in rotation. what do i do !? i had the same problem with a front pulley stage6 that got ruined. :(
My new drivebelt i got yesterday in mail is 2mm wider, so if i add a 2mm washer will solve the slow take of ?
Hello sir I recently chsnged my drive belt on a 2013 50cc Yamaha Zuma moped and when I take off from a dead stop it bogs down as if the belt has slipped what could be the cause?
What belt size is that?
Where can i purchase these washers at? Im trying too them but dont know where too look.
I need some idea why i loss my top speed. Initially the stock top speed is 120kmh then i chg to heavier Dr. Pully that has edges roller weight from 13g to 13.5g. I gain top speed to 132kmh.. but now its gradually decrease the top speed after 1000-2000km mileage and now the top speed is around 124kmh.. can you explain?
I have a question: qmk161 long case came with 818 19.7 30 cvt belt. Can i use 835 belt on that case?
This video is really interesting.
hahahaha
This video is REALLY interesting
For those newbies, the thin adjustment washer seems to be confused with a restrictor washer which it is not. Restrictor washers are much thicker and are on the drive boss, (where the teeth of the belt touches). As the belt gets worn/skinny, you pull the washer(s) out to gain back top end. When belt is too thin for adjustment, you get a new belt. Use the right size washer to fit the new belt correctly.
could u help me? like i own aprilia sr 50 2020, when i drive at 50kmh like the belt goes up and down and it its rly annoying. but below 50 or more then 50 its perfectly fine. does someone know how to fix it?
Great explanation- thanks 1 I've a Yamaha Majesty 250, and after fitting a new drive belt it's slow moving off, but great in the other ranges, so I think I left the washer out!
What year?
Greetings from Greece!! I have a '06 runner vxr 200cc, but I have some problems. I changed my drive belt at 40000km normally and I began to lose power. I lost at least 1000rpm during clutching when I pull full throttle from stop. I've lost all my acceleration power after that service.. :( What do you propose I sould do to fix that? Is a different manufacturers drive belt able to do that much change? I don't know if the mechanic put a washer just as you in the video. What is your opinion? Thanx a lot. (Sorry for my English)
He probably changed to heavier rollers which will cause the belt to move to a higher speed before the clutch engages. You should have taken it back and had it done right.
I have like 5 mm of vairator left at top end that the belt is not running on how do I make it ride higher its a yamaha jog rr with 70cc kit 5.2g rollers stiffrt contra spring? Race exhaust thanks
what is the name of kit your talking about
How tight the belt suppose to be?
My belt i think is rubbing on the starter gear just above the variator I’m using 6g weights and stock clutch so don’t know what’s going on I do have a pwk 21 carborator and a 90cc BBK for it so it might be too much for that belt and it goes beyond the threshold
Thank you for sharing 👍
I changed my drive belt and clutch.my bike was going 90 mph.running real smooth.well one of my idiot neighbors jammed my kick-start totally backwards.i fixed it again. I thought.but now it won't start.i think the cat is too tight.any thoughts. I'm gonna take it apart again today.and loosen it up a little
Cool stuff and to the pint thank you's
Had a belt snap and changed out pretty much all of my cvt while i was putting a new one on, new pulleys front and rear, new clutch shoes, new contra spring, clutch springs, rollers etc
Problem I have now is my belt is sitting low in the rear pulley, will the washers help with that?
Same, did you find a fix?
I have kymco movie 150 , it's belt cuted every time I Replace, what can I do? Any advice?
Very small detail that can fix gigantic issue, thanks for the info. I'm looking for a solution on why my Yamaha Aerox is vibrating & dragging a bit. This could help thanks :D
Did it help? I wanna try the same thing.
Dose the adjustment washer kit work on a taotao50 scooter? Cuz I I think I have bad slipping or something and my power is low, I've replaced everything around the belt with new parts and I still get a burning rubber smell and a lot of heat build up on the variator part of the hub thing... I think this may solve my problem but I sure it's for only one pacific brand of scooter kind of thing...
you can purchase many size..just check your.
very informative video
where i can get this spacers
What is the toothed washer type thing called that goes under the bolt, I'm in need of this but not sure what it's called
Its for the kickstart.. if you look in your belt cover theres a piece that mirrors the piece you asking about. When you kick start the piece in cover spins and shoots towards the piece on crank, they interlock and rotate the engine. The cover side piece returns to its lowest point once you release the kick start lever.. if you like having another way to start your engine incase battery dies, then yes you need it.
im about to purchase one that has acceleration problem . he had someone mess with it before it has low low miles and is slow on take off and fails to really pick up speed . wondering if its worth the 700 he want its literally got less that 200 miles on it . i cant remember the name of it tho lol
Wear can I get the washer from
Hi, @Scoot tuning
I own an Aprilia SR 150, and the thing is that one of my friends stupidly tried to 'launch' it. Meaning, holding the brakes and going almost full throttle for like 2-3 seconds, but of course that did not work out for him.
Now, the thing is, when I accelerate,there seems to be a lag in the engine revving up and actually moving ahead instantly, like it used to.
What exactly might have gone wrong and how can I fix it?
Thanks
Might of trashed your rollers. If they have flat spots they will not work properly.
How big is the washer?
Hi, I have a problem with my scooter. It's a Piaggio Beverly 300 Tourer 2009. I just replaced myself the driving belt and the rollers on the variator, closed everything and then tested on the center stand. On idle rpm the rear wheel has an unusual spinning. I haven't actually done any distances in order for the new parts to settle, but this spinning concerns me a lot. The clutch bell nut and axis is moving as if the clutch is engaged at idle rpm and so is the wheel. What could be the problem? Have I tighten it more that required? Or belt is not installed/settled as you described in the video?
Your clutch springs are engaging to soon.. or you have a clearance issue between the bell and the clutch pads, (check compatibility of bell with clutch)
Same here mate, I have 125 liberty and it spins as soon as I start it, Changed belt, variator, rollers, springs as it has gone 70k kilometers 😂 Mechanic doesn't know what it is I don't either.. Have you managed to get it sorted and what was the issue???
Maestro podria decirme que numero esla correa de la yamaha riva 125cc modelo 94 por favor
That is really interesting.
Hi there I have a Honda GTR bike and it runs but it won't move so can you PLEASE HELP ME OUT WITH THIS PROBLEM THANK YOU AND HAVE A BLESSED DAY
How can i remove this kind of varioter withouth impact gun.y tool cant ve isen on this modele.
its interesting that things are interesting. isn'tnt that interesting that things are so interesting.
I’m interested in hear more about interesting things. You sparked my interest.
@@vtecbanger3180 That's rather interesting
@@stilltlrforlife still interested
Hi can u tell me wht the plate with the groves is called i need to buy a new one thanks
If your talking about the alumininum piece with the fins, its the drive face plate, also serves as the cooling fan for the belt and clutch. The fins are fan blades. Its half a pulley, the variator slides towards it when the weights roll, pushing the belt out, changing the ratio.
Gy6 50s are slightly different, theyre steel, have teeth around the edge for the starter to engage, and the cooling fan is a separate piece of plastic. (Cast aluminum with integrated fan type seems better than the gy6 50's plastic fan blades. the aluminum blades are taller and solid.. plastic fan blades are short and flimsy.
thanks man !
why i cant rotate it ? When i grab the variator to move it (rotate) it doesnt move ..
I put on a New Belt but it's really loose. How can I adjust this to be tighter? It's the Correct 729 belt for a 49cc Chinese scooter but Both are very loose. Can you help?
Larry Long pull your governor washer
darryl keeney governor washer? I'm having the same problem. Seems like I'm not getting the same top speed I was getting before. Take of is still on point just top speed has gone down a LOT
@@Unknown-hl7sbdude same! Did you ever figure out why your top speed went away?
I have a coolster 150cc 3150dx2 ATV and it jumps in and out of gear and just grinds. what could cause this issue?
anthony britt clutch problem..
My variator pulley doesn't have that place to install a washer.
Could I install the washer without having that hole where it should fit?
Many thanks
Mine is like that too. Have you tried to do it yet.
@@HANSONMEDIAUK I didn't tried yet. I'm not sure if could install the washer with my type of variator...
Is this a cfmoto 250cc
What would course the variatior teeth to be worn completely so it just slips around (not the shaft end thank god).
Hey i need to ask some questions
can you explain in french, the principle of your adjustment ,please im french,we use google traduction
Hi how are you doing please help me out my scooter have no power on the take off please help me out
Why all bikes are connected small front gear to rear large gear!?Can u explain
Agr Mohamed Rabbani They fluctuate when running, the rear pinches in forcing the belt to a smaller gear ratio as the front opens up to a bigger ratio. There's videos of it in action on here. Look up gy6 belt slap I know there's a video that shows a case open showing that.
If I only found this vide 2 months ago
Good info
Perfect!
hi how are you why are my belt jumping on my 150 scooter
Güzel video
Thanks!
Could anyone please explain what the problem and fix that this video shows ? thanks!
If your belt in the rear pulley is to low it gets higher in the front and your acceleration will be horrible adding a washer will make the front less tight allowing the belt to go lower in the front and therefore higher in the back to get best acceleration.
Why is the nut unscrewing on my malossi variator coming off when i start the motor?😬😬
You need to torque it
Interesting.
How could it be that the theets get gone by the poulie
Ibeg you can you teach me why?
When starting my taotao 50cc scooter back wheel turns
Adjust the idle screw as low as you can, so that the back wheel stops turning, but high enough so that the engine won't die.
Sir scooty clutch show net slip ho gaya bahuth tie kaise khole
This reminds me of a VW bettle generator belt adjustment
What makes a new belt shred?
+Thomas Flynn This happened to me all the time. Replace your clutch / more lube for it. Easier to just buy a new one with lube already on it like mine had.
LOL then he goes "it'll get too high and kill your take off, which is really NOT interesting" LOLLLLLLLMMMM
So interesting
thanks
I have 5g roller weights and it still doesn't reach the top of the pulley or go over 50mph even down hill what can I do ?
The weight is actually your rpm. You need to find the weight that give you the most hp at best rpm for you engine.
@@stephanpouliot2605 so the lighter the weight the higher my rpm but then the variator can't fully expand if the weights are too light
@@ezgaming8101 lighter weight can only be use with the correct exhaust and engine. High rev engine with tune pipe. Is not good for stock build
@@stephanpouliot2605 Its bored to a 70cc and has a technigas exhaust on it
@@ezgaming8101 try between 4gr and 5.5gr roller weight
My sccoter 125 cc which is accelerating to 30 max 40... Is it belt?
Does a worn clutch has anything to do with low speed?
Thank you
Removing the shim will give you more top end but will lose bottom end.
aha muh 50cc piece of crap goes 50
I changed my drivebelt and now the scooter is very slow and the scooter resonates. I think this might solve it!
I took the washer completely off and my scooter takes off fast and i can even feel it punch on takeoff
i wonder how the scooter in the video have no compression