Would be great if you could do a complete cleaning video of an AR for beginners. The barrel, bcg and anything that could be cleaned after hard use. Step by step removal, cleaning and putting back together of the complete rifle.
When I was in the military, on rare occasion, we were permitted to use a multiple station firearm/part washer with a simple green and water solution. Normally it was after advanced weapon training courses where we would fire 4000+ rounds through our M4s.
I started using my heated sonic tank to clean BCGs this weekend. Mine is running a similar mix of Simple Green and water as well. I put them in for 20 minutes and they came out perfectly clean. Not a spot on them. I had to do zero scrubbing. I washed them off with water and then Acetone to displace the water. After letting them dry I have them a good lubing with Cherry Balmz and put everything back together.
I have cleaned my black powder rifles in my bathtub for years now. Hot water and a little simple green. And scrub with a cleaning brush. Works perfectly and it’s free.
In the army, when I would come in from the field, I would always take my rifle into the shower with me.. Water worked fine, as long as you dry and lubricate. 1980-84 Ft. Bliss
I used a tank like that for years…water and Simple Green. A few Armors classes I went to taught me this. For small parts and handguns I use a sonic cleaner.
Have a parts washer, haven't used it for firearms yet. I do have that same ultrasonic cleaner you have on the bench. I borrow industrial simple green we get in 55gal drums. I couldn't believe what it did to a BCG the 1st time. I ran it several times so it's super hot. When it came out it didn't have a spot of oil or anything on it. It cleans to the point it almost looks bead blasted. If you get it super hot most of the water evaporates instantly anyway. So simple, little time in the tank, and wipe down with oil and its spotless. Barrels do just as good.
Marine boot camp and it was hot water WISK and CLP.. Hooked a hose straight to the hotwater tank and blasted away. Those guns were SPOTLESS, white glove better not see any dirt
Be very careful if one decides to use an aquarium heater. My daughter used a fancy, expensive one, and it killed (boiled) her fish when she had set the "Thermostat" to 73 degrees F.
Yes, that's always an option, but I think he also stated that the tank in his old one was rusted out, and that was a large part of his decision to replace it as well.
![อยู่คนเดียวกับเขา - ส้ม มารี (Zom Marie) [Official MV]](http://i.ytimg.com/vi/gq1cWAIQDLg/mqdefault.jpg)
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
Three years later and I'm still hoping for a full SOTAR "how to clean your rifle" video!
Can't wait for the follow-up cleaning video!
You mention the how to video of cleaning...but I cant find that video. Can you point us in that direction?? Thanks
Would be great if you could do a complete cleaning video of an AR for beginners. The barrel, bcg and anything that could be cleaned after hard use. Step by step removal, cleaning and putting back together of the complete rifle.
When I was in the military, on rare occasion, we were permitted to use a multiple station firearm/part washer with a simple green and water solution.
Normally it was after advanced weapon training courses where we would fire 4000+ rounds through our M4s.
I started using my heated sonic tank to clean BCGs this weekend. Mine is running a similar mix of Simple Green and water as well. I put them in for 20 minutes and they came out perfectly clean. Not a spot on them. I had to do zero scrubbing. I washed them off with water and then Acetone to displace the water. After letting them dry I have them a good lubing with Cherry Balmz and put everything back together.
I have cleaned my black powder rifles in my bathtub for years now. Hot water and a little simple green. And scrub with a cleaning brush. Works perfectly and it’s free.
Is there a part 2 on cleaning the AR-15 rifle?
In the army, when I would come in from the field, I would always take my rifle into the shower with me..
Water worked fine, as long as you dry and lubricate.
1980-84 Ft. Bliss
Great video. All the bucket heaters I find on Amazon of this particular style say to not allow the black housing on top to be submerged in the water.
I used a tank like that for years…water and Simple Green. A few Armors classes I went to taught me this. For small parts and handguns I use a sonic cleaner.
Have a parts washer, haven't used it for firearms yet. I do have that same ultrasonic cleaner you have on the bench. I borrow industrial simple green we get in 55gal drums. I couldn't believe what it did to a BCG the 1st time. I ran it several times so it's super hot. When it came out it didn't have a spot of oil or anything on it. It cleans to the point it almost looks bead blasted. If you get it super hot most of the water evaporates instantly anyway. So simple, little time in the tank, and wipe down with oil and its spotless. Barrels do just as good.
Great stuff Chad - thanks for sharing this with us
I've been cleaning guns with water for several years now. Good to see I'm not the only one. Thanks for the videos.
Slip 2000 725 cleaner degreaser. awesome stuff. Excellent set up Chad
And I thought my Uncle was odd when he told me the Army guys would take their M1's into the hot shower with them and clean everything!
Great video. Didn't know you could use water like that. Can't wait till the how to
Marine boot camp and it was hot water WISK and CLP.. Hooked a hose straight to the hotwater tank and blasted away. Those guns were SPOTLESS, white glove better not see any dirt
Cool setup. Thanks for another video.
@School of the American Rifle
I'm sure you're drowning in work, but perhaps you find the time to do the follow up video.
Would love to see the follow-up video
Keep it coming👍🍻
So what if you used a different solution? Like ballistal and water? Love to hear more about that.
Be very careful if one decides to use an aquarium heater. My daughter used a fancy, expensive one, and it killed (boiled) her fish when she had set the "Thermostat" to 73 degrees F.
Great video
Hot Soapy Water, C.L.P. and an All Purpose Brush! Semper Fi
Did we ever get the follow-up video?
Would you recommend using something like carb cleaner or brake kleen spray to displace the water solution after cleaning?
Ever use a desktop ultrasonic unit to clean parts?
Follow up video coming out soon?? Thanks!
You can get new pumps.
Yes, that's always an option, but I think he also stated that the tank in his old one was rusted out, and that was a large part of his decision to replace it as well.
Why not use paint thinner?
Do you like BCM or Centurion Arms uppers better?
I have two of the newer MkII uppers from BCM, it’s good stuff. There is actually one featured in this video.