@@johndeopaduaART What do you mean detuned. They are either sub 12 ftlbs aka uk legal or over 12ftlbs aka fac rated. It is possible to make a sun 12 rifle over 12 bit this would be illegal and would require the rifle to be on a fac certificate that you would have to apply for through your local police force. Take my advice do not mess with things if you don’t know what you are doing.
I think you need to give the reximex pretensis another reveiw, it was abit rushed lol. It seems alot of the turkish branded guns seem to be pushing the mark on qaulity over the others which are twice the price
It would be helpful to fire off a few shots into the bushes as it's quite difficult to judge the gun noise with the impact following a split second later. Thanks, great review as usual.👍
While I am not a fan of the stock, I really love my Snowpeak/Artemis M25 because it is so damn silent. The action makes almost no noise and the silencer makes it super quiet. (I am Swiss, so I own the full power 40J Version) That stock of this Gun from the Video tough ❤
I'm not normally a fan of bottle guns, but somehow, this one, even with the large bottle seems to have nice proportions. Maybe it's the barrel shroud balancing it out,..... anyway, oddly, I like it.
So basically it’s too heavy, too long, too loud, unacceptable action noise, not particularly well finished, not that accurate and not especially cheap.. sounds a belter 👍
Nice but being heavy may be an issue for field use. "Ping" from the mechanics could also be a problem with vermin. The dovetail adds to the traditional look. In all, the budget rifle market has a lot of contenders.
Good morning, i owned one for 24hr as other than poor finish the bottle angled up to interfere with the shroud. They need some proper quality control imo. Appreciate your work Andy.
Better guns out there for that money Back to the t rex bullpup I think I owe you an apology I made a quip about it being a pr900 Ive since seen one with the stock off and sorry to say it looks very much like the pr900 Sorry Andy Still my go to revuer 👍👍
Great review, as always. I'm loving the Turkish budget guns at the moment, not always the best finished but the shooting makes up for it. But why oh why have you not reviewed the ATA Airborne yet. I have been so impressed with mine and I challenge you to find a better rifle for the money.
Thanks for the review! Would be nice to see the higher power version's performance / accuracy. Sounds like the hammer spring is set for much more powerful setup.
I agree, I have an ATA Airbourne in .177. Great gun. The stock is finished well, comes with a moderator and it is regulated. Same huge air bottle. I fitted a cheap bipod and use jsb exact 8.44 grain pellets. Really accurate. Andy, please do a review of it.
@keithbutler2437 yea mine really likes the monsters and the beasts from jsb .. you should try them also the gamo cheapo nasty ones do ok out to 25m not a match pellet but for less than a fiver a tin .. what ammo are you using
I loved the trigger guard design, but there were other things about that rifle that concerned me for the money tbf. Like having to finish the woodwork off yourself with some wet and dry and that nick out of the cheek riser. The butt pad wasn't adjustable either. The barrel shroud should act as a sound moderator imo if you're going to include one. Especially if you know your rifle is a little barky too...? I'd be curious to see it in a polymer version for all those fieldwork users out there, hopefully it will bring the weight down. Under 11ft/lbs is a little light for some pest work also I think, maybe the manufacturer can tweak it and include a regulator for better shot control and fill longevity? Maybe this was why you had the odd pellet out of group as the air could have been a little high of a little low in output? I'd love to see a pellet test, but maybe wash them first before testing? It will help get rid of any bits that may affect the BC of them.? That's one thing you don't see on pellet tins... What their Ballistic Coefficiency is, so you know how they'll perform over distance and how much drop or how much they're effected by windage?
Morning Andy , full English this morning . Enjoyed the balanced and well presented review and personally thought the rifle performed quite well for a .22 . OK the finish needs some attention paying to it through Quality Control at the factory but all in all a nice product . If I wasn't a Kral addict I'd be on one like a tramp on chips ! Liked the comment about your channel becoming the Top Gear of the gun world. Its correct. Loved the link between love Island and filling nipples , just saying 😂 Dave
I'd gladly have one of these. Looks good imo. I really liked that it had not an integrated moderator in that shroud. I'd probably though sand the stock and give a grey fininsh instead of brown - just to be a bit more in my liking. The rifle has a pretty good sized airtank also. I'd probably be up for a trigger job though to lighten and smoothen it up.. Way nice to give it a second chance. Dunno how many shots using the Dead Center pellets thru the barrel before the first accuracy test - but the latter test seemingly had gotten a bit more used to the pellets for the test. Great work Andy and crew! Thank you so very much once again for a splendid review!!😊👍🏻👍🏻 PS. So many Turkish brand PCPs nowadays.. Dunno if older manufacturers get themselves new machinery for new design upgrades, and then they just sell out their old equipment to people who wull become manufacturers to a new brand on the marjet....but it surely looks that way. So many new airguns just basically seem so alike all other models already made..😂 Would not be a bad thing though imo. I really do not mind what the brand says, if it just performs well enough for the money..
It’s really quite strange how I thank “Vector Air” at the end of each video and put a link to them in the drop down and still I get asked where can one be bought?🤦♂️
I don’t film things being shot, that’s not something you’re going to see on this channel. the accuracy and portability of the gun is always discussed, which should help you make your mind up if it is suitable for your needs. Stay safe, Andy
I own this gun. It certainly is too heavy. It also isn’t powerful enough for what I do. I have a silencer and it is sooooo long. Wish I saw this when I purchased a year ago.
@@AAROnair i know but im into air rifles and Pistols as well as airsoft as well and it would be interesting to see the bang per £ you get compared to air rifles and Pistols
@@neilwilson5296 I understand, but most air gunners dont do airsoft and they dont have an UKARA licence, so not many people who watch this channel would be interested. An occasional look at a specific item may be of interest, but not a review of several sniper rifles. Stay safe. Andy. Thanks for watching
Agreed. But I think part of it is because of the air tanks on the guns. They're bulky, so the barrels get beefed up to try balancing the looks. Picture this same gun with a skinny uncovered barrel.... it would look "weird"(er). It's not a bad looking stock, but I think that wooden trigger guard is a weak point, probably the first thing that will break if it suffers a hard hit. 🤔 Pete 🇨🇦
You know if that was released in the 1980s it would have blown everything out of the water now it's just a cheap alternative. I know thats progress but just saying.
Hammer spring noise is awful makes ANY moderator pointless. I hate the glossy bottle which throws the color themes off when everything else is matte black. Groups like your shooting in high wind for a calm day. That wood finish looks like it came from Hatsan. Gun itself looks like it was made with parts from lesser guns from China.
![[안방1열 풀캠4K] 베이비몬스터 'DRIP' (BABYMONSTER FullCam)│@SBS Inkigayo 241110](http://i.ytimg.com/vi/AQ4RIghEvUs/mqdefault.jpg)
We sold one of these in the shop a couple of months ago fantastic rifle for the money. The customer is very very happy with it.
I have a detuned version, what do i need to change for it to be in its normal form?
@@johndeopaduaART
What do you mean detuned. They are either sub 12 ftlbs aka uk legal or over 12ftlbs aka fac rated. It is possible to make a sun 12 rifle over 12 bit this would be illegal and would require the rifle to be on a fac certificate that you would have to apply for through your local police force. Take my advice do not mess with things if you don’t know what you are doing.
Good morning Andy and everybody on here , have a fantastic day
U2, buddy. 👍
Kral Puncher Jumbo equivalent. I guess. It would be nice to see comparison of these two, Kral Puncher Jumbo and Kervan Airboss.
Great show… Boise, Idaho, USA👍🏼
I think you need to give the reximex pretensis another reveiw, it was abit rushed lol. It seems alot of the turkish branded guns seem to be pushing the mark on qaulity over the others which are twice the price
It would be helpful to fire off a few shots into the bushes as it's quite difficult to judge the gun noise with the impact following a split second later. Thanks, great review as usual.👍
While I am not a fan of the stock, I really love my Snowpeak/Artemis M25 because it is so damn silent. The action makes almost no noise and the silencer makes it super quiet. (I am Swiss, so I own the full power 40J Version)
That stock of this Gun from the Video tough ❤
The crown of that barrel is massively off centre 1:35 which most likely accounts for its less than stellar accuracy.
Welcome to Turkish quality control.
I'm not normally a fan of bottle guns, but somehow, this one, even with the large bottle seems to have nice proportions. Maybe it's the barrel shroud balancing it out,..... anyway, oddly, I like it.
That is the K1.The K2 lose the bottle and has a smaller 330cc tube instead
So basically it’s too heavy, too long, too loud, unacceptable action noise, not particularly well finished, not that accurate and not especially cheap.. sounds a belter 👍
Yep I bought the snowpeak M16 it's spot on and less then £400
Nice but being heavy may be an issue for field use. "Ping" from the mechanics could also be a problem with vermin. The dovetail adds to the traditional look. In all, the budget rifle market has a lot of contenders.
Great review but I think the Pretensis is a better looking and more accurate gun which you should test again when you have a bit more time!
Good morning, i owned one for 24hr as other than poor finish the bottle angled up to interfere with the shroud. They need some proper quality control imo. Appreciate your work Andy.
Better guns out there for that money Back to the t rex bullpup I think I owe you an apology I made a quip about it being a pr900 Ive since seen one with the stock off and sorry to say it looks very much like the pr900 Sorry Andy Still my go to revuer 👍👍
Great review, as always. I'm loving the Turkish budget guns at the moment, not always the best finished but the shooting makes up for it.
But why oh why have you not reviewed the ATA Airborne yet. I have been so impressed with mine and I challenge you to find a better rifle for the money.
Another great review Andy! 👏 I think ill stick with my JTS Airacuda though. 👍😉
Pete 🇨🇦
Thanks for that good review,
Thanks for the review! Would be nice to see the higher power version's performance / accuracy. Sounds like the hammer spring is set for much more powerful setup.
Great review Andy but for me it’s too long, too loud, weighs too much and is poorly finished. Really glad you always give an honest review.
I wonder if you can fill that empty cover with something like fibre glass to cut the noise down a bit
THANKS Andrew for another HONEST review sir 🇬🇧👍🏼
Andrew, Blimey, I thought it was my mother 😉, thank you for watching. stay safe
@@AAROnair🤣 Lol sorry Andy. Have a great weekend SIR 🇬🇧👍🏼
1:38 Interesting machining on the crown of the barrel . Maybe it’s some new advanced technology 😂.
Try the ATA Ams airborne. Simular gun better stock and finish and 200quid cheaper ...
I agree, I have an ATA Airbourne in .177.
Great gun. The stock is finished well, comes with a moderator and it is regulated. Same huge air bottle. I fitted a cheap bipod and use jsb exact 8.44 grain pellets. Really accurate.
Andy, please do a review of it.
@@keithbutler2437where did you find ATA in 177. I thought they were only importing .22 into UK.
@keithbutler2437 yea mine really likes the monsters and the beasts from jsb .. you should try them also the gamo cheapo nasty ones do ok out to 25m not a match pellet but for less than a fiver a tin .. what ammo are you using
That looks better than some dearer ones...
Amazing video
Can you please share what is the tripod you are using?
as always, that is shared in the drop down description
I loved the trigger guard design, but there were other things about that rifle that concerned me for the money tbf. Like having to finish the woodwork off yourself with some wet and dry and that nick out of the cheek riser. The butt pad wasn't adjustable either. The barrel shroud should act as a sound moderator imo if you're going to include one. Especially if you know your rifle is a little barky too...?
I'd be curious to see it in a polymer version for all those fieldwork users out there, hopefully it will bring the weight down. Under 11ft/lbs is a little light for some pest work also I think, maybe the manufacturer can tweak it and include a regulator for better shot control and fill longevity? Maybe this was why you had the odd pellet out of group as the air could have been a little high of a little low in output?
I'd love to see a pellet test, but maybe wash them first before testing? It will help get rid of any bits that may affect the BC of them.?
That's one thing you don't see on pellet tins... What their Ballistic Coefficiency is, so you know how they'll perform over distance and how much drop or how much they're effected by windage?
Storm Badet i believe.It was very severe and broke our back door.You wouldn't want to go out shooting in that storm!
Morning Andy , full English this morning . Enjoyed the balanced and well presented review and personally thought the rifle performed quite well for a .22 . OK the finish needs some attention paying to it through Quality Control at the factory but all in all a nice product . If I wasn't a Kral addict I'd be on one like a tramp on chips !
Liked the comment about your channel becoming the Top Gear of the gun world. Its correct. Loved the link between love Island and filling nipples , just saying 😂
Dave
That 'open cast quarry' comment made me laugh out loud. Classic! :D
Too loud from muzzle and the action and too heavy, it must be from Turkey🦃😄
Thanks for the review Andy!👍
I spent most of this video looking at the bsa on the all 😻
Even in FAC I can see this more as a project gun. It is a bit rough around the edges. That “PING” wow!
Can you get your hands on a heuben gk1 to review please?
1:36 That crown on the barrel looks like its been done on an angle?
I'd gladly have one of these. Looks good imo. I really liked that it had not an integrated moderator in that shroud. I'd probably though sand the stock and give a grey fininsh instead of brown - just to be a bit more in my liking. The rifle has a pretty good sized airtank also. I'd probably be up for a trigger job though to lighten and smoothen it up..
Way nice to give it a second chance. Dunno how many shots using the Dead Center pellets thru the barrel before the first accuracy test - but the latter test seemingly had gotten a bit more used to the pellets for the test.
Great work Andy and crew! Thank you so very much once again for a splendid review!!😊👍🏻👍🏻
PS.
So many Turkish brand PCPs nowadays..
Dunno if older manufacturers get themselves new machinery for new design upgrades, and then they just sell out their old equipment to people who wull become manufacturers to a new brand on the marjet....but it surely looks that way. So many new airguns just basically seem so alike all other models already made..😂 Would not be a bad thing though imo. I really do not mind what the brand says, if it just performs well enough for the money..
❤ my favourite show on youtube currently camt get enough of it like a replacement for top gear but guns instead of cars 😂😅
thank you, you may want to watch out for the Christmas special then……
Morning all🎉
Iv just watched a review on the gamo viper express and wondered if u know or have used one also if they are legal in uk many thanks
Superb review... thanks ;)
Are you related to the all year round motorcyclist? "Splendiferous" is his word 😉😋😂
I think you need to test those pellets more seriously Andy.
Morning Andy
Great review again, as always... Could be nice to see information on where to buy the various PCP rifles that you're reviewing 😊
It’s really quite strange how I thank “Vector Air” at the end of each video and put a link to them in the drop down and still I get asked where can one be bought?🤦♂️
@@AAROnairDOH !!!! 😂
Would you ever do a pest control field review
I don’t film things being shot, that’s not something you’re going to see on this channel. the accuracy and portability of the gun is always discussed, which should help you make your mind up if it is suitable for your needs. Stay safe, Andy
Good review but can't see it being Great seller better stuff at same price out their 👍
I own this gun.
It certainly is too heavy. It also isn’t powerful enough for what I do. I have a silencer and it is sooooo long. Wish I saw this when I purchased a year ago.
Nice.
The wooden trigger guard is a deal breaker for me.
Awesome rifle beautiful piece of wood
4kg ! Too heavy,simple as!
There are plenty of excellent lighter accurate air rifles out there, and cheaper too !
Rather have the Picatinny rail any day
Would you do a review and look at the airsoft sniper rifles as some of them are gas blow back and are very capable of hitting 40-50 foot
sadly this isn’t an airsoft channel. stay safe Andy
@@AAROnair i know but im into air rifles and Pistols as well as airsoft as well and it would be interesting to see the bang per £ you get compared to air rifles and Pistols
@@neilwilson5296 I understand, but most air gunners dont do airsoft and they dont have an UKARA licence, so not many people who watch this channel would be interested. An occasional look at a specific item may be of interest, but not a review of several sniper rifles. Stay safe. Andy. Thanks for watching
Good Morning AAR enthusiasts.
sir. how much your airgun?
It sounds funny 😅
This is not the 'Formula 1 book of excuses?!', LOL!
1 min 35 secs looks like the muzzle crown is way off centre
Did i miss how much it cost?
That ping sound wound be annoying after awhile
Good Vid.
I'm sorry but that is not a one hole group. One hole means one hole. Not loads of holes next to each other
So now we know what happend to Aselkon.
Does have a bit of a twang.
Big bottle indeed,a rubber dust cap would not be a luxury on the air nipple I guess
Has a right old twang😂
The ATA Airbourne looks better and better finished. Imo.
Nice review, but that gun isn't for me. The trigger guard might be nicely done but it's going to get knocked, cracked, and ruin the whole stock.
Why do most companies make their PCP’s so ugly looking, what’s wrong with making it look nicer like a normal rifle
Agreed. But I think part of it is because of the air tanks on the guns. They're bulky, so the barrels get beefed up to try balancing the looks. Picture this same gun with a skinny uncovered barrel.... it would look "weird"(er). It's not a bad looking stock, but I think that wooden trigger guard is a weak point, probably the first thing that will break if it suffers a hard hit. 🤔
Pete 🇨🇦
Well loud & Heavy is not a selling point for me with ladies or Firearms .
Goodmorning my friends! Have a nice day!
Greetings , enjoy your day
@@simonnoble7589 Morning Simon!
Good day to you as well.
Pete 🇨🇦
@@007tallguy Morning Pete! Filip.
Looking at the review not one for me
Good review.
You wouldn't buy it for looks, quality, or accuracy. 😕
You know if that was released in the 1980s it would have blown everything out of the water now it's just a cheap alternative. I know thats progress but just saying.
Hammer spring noise is awful makes ANY moderator pointless. I hate the glossy bottle which throws the color themes off when everything else is matte black. Groups like your shooting in high wind for a calm day. That wood finish looks like it came from Hatsan. Gun itself looks like it was made with parts from lesser guns from China.
Way to heavy, way to long.
I stopped watching you because you don't do in and feet, You should do it four us in the USA. Thank you Bruce Hanson.
2nd
1