Received 2 P365XL grip modules from Wilson Combat today. They do not offer the FDE color with a manual safety cut out. So I got a guide jig from Osage County Guns for cutting same with a dremmel tool and of course the jig won’t fit in the grip module because it is thicker polymer near the right rear corner than a standard Sig grip. So you have to trim down the jig or try something else. I had another Sig P365 XL grip module with the ms cut outs, so I put the 2 grips side by side and put a 3/32” Allen wrench through the holes at the rear of them to line them up and clipped them together about half way with steel spring clips. Then used the old grip ms cut outs as a guide to dremmel out the new. Worked great. However, while doing this I noticed that the new Wilson grips are Soo thin in the corners where the sides meet the front that I could see light through them. This is very concerning, and I plan on contacting Wilson Combat customer service about this. Both grip modules are like this
@@firearmsinsight I talked to Wilson Combat customer service today. They said they had never heard of this before and asked me to send them pictures. It was pretty difficult to get a good shot of the thin areas, but got a couple of fairly good ones and sent them over. We’ll see what happens next
I run standard P365 with 12 round main, essentially the same length as an XL grip and has the baseplate. 15 rounder as my backup and two more 12 rounders in my vehicle, because at that point, already in some shit.
Sold out for now. Hopefully will be in stock shortly. Thanks for the video. UPDATE: I have received the WC grip module and it is WAY better than stock grip. The trigger group was tricky to install. I need to silicone in the tungsten rods next, but am very happy with this pistol now. My S&W Shield may be sold soon at this rate. Thanks!
Mine are supposed to be delivered tomorrow morning. I bought both the 365 and the XL and the P320 but the 320 I have is a 40cal. But I ordered the grip module for the P320 9mm so now I have to change the Fire Group also the Barrel to the 9mm. And the bad thing is I actually ordered the P320 Grip Module in June15,2021 but didn’t receive it until December 14 of 2021. By then to be honest with you I had Forgotten all about so when it came I had to actually think back to when I ordered the thing. Because they didn’t charge my Account until they actually sent it so that was a Bonus. This time I shipped it Two Day UPS Freight. It telling me it will be here tomorrow. I can’t hardly wait, the 365 XL is my EDC in cold weather then I go back to the 356 for better concealment.
I do love the modularity of the 320/365 lines. The Wilson Combat grips are an excellent compliment to an already great firearm. The grip texture is not slippery at all. I would describe it as borderline aggressive without being aggressive if that makes sense lol.
@@firearmsinsight thanks for the reply, I understand what you’re saying, I’ve been looking at those grips but it seems there’s none in stock on earth 😂
In my own personal opinion, yes. This grip feels more solid and is tailored better to the hand. Not to take away from the 365 grip modules though, because I do think they make a great grip….but Wilson Combat took the same technology with the 320’s and perfected it for the 365 line.
The grips are good. I’m a bigger fan of the 365 grips than I am the 320. These Wilson Combat grips, in my opinion, are even better. If you haven’t tried one I would definitely recommend it.
Great vid, thank you for the insight! Did you install extended mag releases on your P320s? They appear to protrude quite a bit more than the stock release on your 365XL. With the WC having a bit thicker grip than the factory 365XL grip, does the standard mag release work alright for you or do you foresee changing it out?
I’m glad you bring this up! This is the one area that I would say I would change. All four WC frames that I show in this video have the mag release that came with the grip. The 320 releases seem to be more responsive than the 365’s for whatever reason. They function perfect, but a little extra meat on that release could go a long way!
Received 2 P365XL grip modules from Wilson Combat today. They do not offer the FDE color with a manual safety cut out. So I got a guide jig from Osage County Guns for cutting same with a dremmel tool and of course the jig won’t fit in the grip module because it is thicker polymer near the right rear corner than a standard Sig grip. So you have to trim down the jig or try something else. I had another Sig P365 XL grip module with the ms cut outs, so I put the 2 grips side by side and put a 3/32” Allen wrench through the holes at the rear of them to line them up and clipped them together about half way with steel spring clips. Then used the old grip ms cut outs as a guide to dremmel out the new. Worked great. However, while doing this I noticed that the new Wilson grips are Soo thin in the corners where the sides meet the front that I could see light through them. This is very concerning, and I plan on contacting Wilson Combat customer service about this. Both grip modules are like this
Keep us updated on this! Interested to hear what they say!
@@firearmsinsight I talked to Wilson Combat customer service today. They said they had never heard of this before and asked me to send them pictures. It was pretty difficult to get a good shot of the thin areas, but got a couple of fairly good ones and sent them over. We’ll see what happens next
@@firearmsinsight Wilson sent a return authorization and will send replacements
Hope everything has been replaced and working well!
Hardest part is installing the mag release, very tight fit.
It can be a pain! Use a finger in the module to help guide it through!
and... theyre on sale right now, $13 off!
Good to know!!
The 365 line from sig looks really really nice. I think the x will be the next purchase.
I own the XL, but i think if I had to do it all over I would have gotten the X. Shorter slide, but not sacrificing the longer grip. Great choice!
I run standard P365 with 12 round main, essentially the same length as an XL grip and has the baseplate. 15 rounder as my backup and two more 12 rounders in my vehicle, because at that point, already in some shit.
Installed mine today on the XL man! I’m in love lol.
Sold out for now. Hopefully will be in stock shortly. Thanks for the video.
UPDATE: I have received the WC grip module and it is WAY better than stock grip. The trigger group was tricky to install. I need to silicone in the tungsten rods next, but am very happy with this pistol now. My S&W Shield may be sold soon at this rate. Thanks!
They’ve sold out a couple times since they released. Just keep an eye out! They’ll get them in soon!
@@firearmsinsight i believe that optics planet has them in stock
Good to know, thanks!
@@firearmsinsight I was able to place a back order (grip with tungsten rods) with Wilson Combat. I figure it’ll be in soon.
Nice!
🙌🏼🙌🏼🙌🏼
Would be nice if they made the matching 15 rd extended mag
I’m not a fan of the 15 round mags. I have one, but when I load it the ammo sounds like it’s bouncing around in there.
@@firearmsinsight
Yea I get the same rattle. But for a few extra rounds I'll take it.
Agreed!
Any problems fitting this into a kydex holster? I’ve got a Vedder holster on order an am hoping it will fit.
Nope! No problems for me! I used cheap and more expensive brand holsters too and they all worked well.
@@firearmsinsight Thanks! Good to know.
Mine are supposed to be delivered tomorrow morning. I bought both the 365 and the XL and the P320 but the 320 I have is a 40cal. But I ordered the grip module for the P320 9mm so now I have to change the Fire Group also the Barrel to the 9mm. And the bad thing is I actually ordered the P320 Grip Module in June15,2021 but didn’t receive it until December 14 of 2021. By then to be honest with you I had Forgotten all about so when it came I had to actually think back to when I ordered the thing. Because they didn’t charge my Account until they actually sent it so that was a Bonus. This time I shipped it Two Day UPS Freight. It telling me it will be here tomorrow. I can’t hardly wait, the 365 XL is my EDC in cold weather then I go back to the 356 for better concealment.
Let me know what you think when you install! I have them on all my P series, and I love them!
The XL lower is the same as the 365X model correct? Thanks
Yep!
Oh I wanted to ask if the grip is slippery…?
I do love the modularity of the 320/365 lines. The Wilson Combat grips are an excellent compliment to an already great firearm. The grip texture is not slippery at all. I would describe it as borderline aggressive without being aggressive if that makes sense lol.
@@firearmsinsight thanks for the reply, I understand what you’re saying, I’ve been looking at those grips but it seems there’s none in stock on earth 😂
Would you say the Wilson XL grip is larger in the palm, ie: fill up your hand and giving a better grip
Yes, for sure. I have larger hands and this grip fills my hand way better than the standard grip.
@@firearmsinsight thanks for the info, I've somewhat fixed it on mine with Tylon Grips, I LOVE that XL pistol
Stock Sig grips has a thin plastic feeling in the palm. Is this more solid especially as you tap the face of the grip? Thanks for your insight.
In my own personal opinion, yes. This grip feels more solid and is tailored better to the hand. Not to take away from the 365 grip modules though, because I do think they make a great grip….but Wilson Combat took the same technology with the 320’s and perfected it for the 365 line.
Sig grips are fantastic, why change them?
The grips are good. I’m a bigger fan of the 365 grips than I am the 320. These Wilson Combat grips, in my opinion, are even better. If you haven’t tried one I would definitely recommend it.
is it hard conceal with the Wilson grip does it print
Not any more than a regular grip would. They’re pretty similar when it comes to concealment.
Great vid, thank you for the insight!
Did you install extended mag releases on your P320s? They appear to protrude quite a bit more than the stock release on your 365XL.
With the WC having a bit thicker grip than the factory 365XL grip, does the standard mag release work alright for you or do you foresee changing it out?
I’m glad you bring this up! This is the one area that I would say I would change. All four WC frames that I show in this video have the mag release that came with the grip. The 320 releases seem to be more responsive than the 365’s for whatever reason. They function perfect, but a little extra meat on that release could go a long way!
@ :12…Wilson combat P365XL?
That’s a Sig P365XL that I swapped in to the WCP365XL Grip Module
How does it cost from Wilson combat?
The link for the grips is in the description. All the prices can be found there!