How to use 3D pen: • How to use basic 3D pen Compare the material: • Compare the material o... Make with 3D printer: • Tinkercad + 3D modelin... #Eunny #3dpen
Hey pls reply my 3d pen filament is not coming out side but it is melting but after melting the filament can't coming outside and iam pressing the 1st button but still help pls reply big fan
Do you happen to know the resistance of the tip by chance? I hadn't even used mine yet, Yellow and Red LED... didn't get to the Green LED to load the filament or sound like anything was working to even load the filament... with an almost immediate burnt smell and then died. This was after using with a universal 120W power supply set to 12V that wasn't working and making all the LED's flash. I made a video regarding and took notes. Afterward I plugged into the 5V USB and only the yellow LED came on. Later I plugged into a 12V power supply and that is when the above happened. Wondering what the tip electrical characteristics are to see if that is the issue or maybe is on the board inside. Thanks for sharing!
My 3D pen won’t pull the filiment in, like it does and then it stops and if I push the filiment in it while pressing the button it goes in but stops when I let go. Like it won’t grab onto the filiment
🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
eunny! i am in the middle of taking mine apart but it seems to have a newer model with a yellow motor looking thing right in the middle as soon as you open in front of the extruder line (wheere you so easily empty the filament from) HOW DO I MOVE THIS!
Do you happen to know the resistance of the tip by chance? I hadn't even used mine yet, Yellow and Red LED... didn't get to the Green LED to load the filament or sound like anything was working to even load the filament... with an almost immediate burnt smell and then died. This was after using with a universal 120W power supply set to 12V that wasn't working and making all the LED's flash. I made a video regarding and took notes. Afterward I plugged into the 5V USB and only the yellow LED came on. Later I plugged into a 12V power supply and that is when the above happened. Wondering what the tip electrical characteristics are to see if that is the issue or maybe is on the board inside. Thanks in advance!
hello, thanks for this tutorial, I just received the exact same 3d pen, never used it, but it is not heating, the red light is blinking and when I put my finger away from the button, the pen switch off, thank you very much for your answer
OK how much money would you want if I sent my 3-D pen over to you to fix it Cause I'm an idiot and I can't do any of this stuff on my own and I don't want to break it even more let me know please
Listen up. My 3d pen turns off when I press the button to draw stuff.. anyone knows what to check before I have myself a go with the soldering iron? Ive cleaned out the residue and everything else works fine. It only switch totally off the minute I push the drawing button 🤬🔞😎 thanks in advance. M
When filament go inside I not press load button but it automatically coming Please make a video for this problem 3d pen name:3d pen-2 professional Please make a video please
![ช้างศึกสู้ต่อไป!! พาเปียโน ดูบอลไทยครั้งแรก ตกรอบแบบโคตรเสียดาย!! l [Nickynachat]](http://i.ytimg.com/vi/4WloIH645Lg/mqdefault.jpg)
Hey pls reply my 3d pen filament is not coming out side but it is melting but after melting the filament can't coming outside and iam pressing the 1st button but still help pls reply big fan
Do you happen to know the resistance of the tip by chance? I hadn't even used mine yet, Yellow and Red LED... didn't get to the Green LED to load the filament or sound like anything was working to even load the filament... with an almost immediate burnt smell and then died. This was after using with a universal 120W power supply set to 12V that wasn't working and making all the LED's flash. I made a video regarding and took notes. Afterward I plugged into the 5V USB and only the yellow LED came on. Later I plugged into a 12V power supply and that is when the above happened. Wondering what the tip electrical characteristics are to see if that is the issue or maybe is on the board inside. Thanks for sharing!
Were you able to fix it?
My 3D pen won’t pull the filiment in, like it does and then it stops and if I push the filiment in it while pressing the button it goes in but stops when I let go. Like it won’t grab onto the filiment
same thing with me rn i barly used it do you know if you ever found a fix or was it just broken
Same problem 😕 😢
How do you take out the filament in the nozzle? 😩
thanks bro i was able to fix mine
Kind of you to share your breakdown and repair knowledge. Had to fix a few myself :)
Thank you for reading my mind
Happy new year!!
🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
@@1islam1 how the hell are you doing that again
@@1islam1 That's good to know I love hearing religious teachings of every religion
@@1islam1 I am Islamic but stop,please just let others have there own believes
eunny! i am in the middle of taking mine apart but it seems to have a newer model with a yellow motor looking thing right in the middle as soon as you open in front of the extruder line (wheere you so easily empty the filament from) HOW DO I MOVE THIS!
I didnt know how to do it too just like urs
Do you happen to know the resistance of the tip by chance? I hadn't even used mine yet, Yellow and Red LED... didn't get to the Green LED to load the filament or sound like anything was working to even load the filament... with an almost immediate burnt smell and then died. This was after using with a universal 120W power supply set to 12V that wasn't working and making all the LED's flash. I made a video regarding and took notes. Afterward I plugged into the 5V USB and only the yellow LED came on. Later I plugged into a 12V power supply and that is when the above happened. Wondering what the tip electrical characteristics are to see if that is the issue or maybe is on the board inside. Thanks in advance!
My 3D pen numbers don't fall, what do I do? Please tell me
hello, thanks for this tutorial, I just received the exact same 3d pen, never used it, but it is not heating, the red light is blinking and when I put my finger away from the button, the pen switch off, thank you very much for your answer
I have the same problem. Did it work?
Just press the forward button again
Plug it in turns on but when I push the fill button nothing happened
my 3d pens button that lets it begin heating is jammed, what do i do?
Same what happened after
OK how much money would you want if I sent my 3-D pen over to you to fix it Cause I'm an idiot and I can't do any of this stuff on my own and I don't want to break it even more let me know please
Mine is taking forever to heat up
Listen up. My 3d pen turns off when I press the button to draw stuff.. anyone knows what to check before I have myself a go with the soldering iron? Ive cleaned out the residue and everything else works fine. It only switch totally off the minute I push the drawing button 🤬🔞😎 thanks in advance. M
Ok mine sonnet even turn on😡🤯🤬👿
❤
When filament go inside I not press load button but it automatically coming
Please make a video for this problem
3d pen name:3d pen-2 professional
Please make a video please
I have the same issue , If u figure out how to fix it pls help me out
My 3D pens not working because its filement will not come out and it don't work btw it still wont work!
Bro you are indian like me
My 3d pen is out of oder
Para que hacen un vídeo de esos. No sirve para nada. No explican nada. Ver qué arman y desarman a toda velocidad. Para que?
Omalhabobp
Its dangerous dont do 😱😱😱😱😱😱😱😱😱😱😱😱😱😱