Potent Printables what filament are you using? If you could please put a link I would love that. I’m looking for PLA filament. I am going to buy that pen as well because I found it rather useful. Please and thanks in advance. Love ur vids keep it up!😊
I have been using Hatchbox PLA like this link: amzn.to/2u9h4t1 Keep in mind these are big 1kg spools usually used for 3D printing, so it is a lot of filament for 3D penning. I have also been using a nice "sample pack" of PLA filament from Amazon Basics, which was 22 colors in smaller amounts for like $30 but it seems to have been discontinued. I will probably next try this sample pack: amzn.to/2lJkFwX Hope this helps!
Great series! I was looking for something like this, but just couldn't find it. Until this showed up. Thank you! I would like to see a video about do's and don'ts. Like, "dont use it on this material, it might melt but this material is great for this use" or something like that.
Thank you and glad you found it helpful. By use on a material, you mean materials that you can and can not pen over with PLA? In other words can you pen over a plastic tupperware container vs a ceramic plate?
Thank you , I do alot of FDM. printing, and I will be adding a 3D pen to my tool set , because it's handy to make basic shapes of objects that are much easier to do by hand and to give them a different texture!!
Hey @Potent Printables do you have a videotutorial for the choral part shown at the intro at 0:08? I've searched for it on your ytchannel but can't find it yet... Hope you'll upload soon. 🤳🏻🙏🏼
I want to buy a 3D pen. I’ve never used a 3D pen before and don’t know much about them or how to use it. However, I find it very satisfying and relaxing habit. I watch a few of your great videos for beginners and advanced. Your have a great talent and patient. 😁 What 3D pen do you recommend for beginners and non toxic. Thanks.
Taking a look at the pens I have, it seems like most of them would work for left handed people. The only thing that would change would be operating some of the buttons with your pointer finger vs thumb.
The one I bought works left handed as well, but I can see the screen as well as I wish I could. It still works very nice and I just do a little turn to see the screen. It’s very nice, quick cooling, comes with 3 small spools, and it doesn’t cost all too much. MYNT3D Professional Printing 3D Pen with OLED Display www.amazon.com/dp/B01BLQ24IW/ref=cm_sw_r_cp_tai_yVJrEbGJ31F1X
Hi from Brazil! Nice tutorial! Please, would you update the link to buy the 3d Pen at Amazon? Or better, would ou tell us the name of the product or manufacturer? Thanks.
Thank you. I updated the link, so it is not broken anymore, but that model is still out of stock. The manufacturer and model number are: Soyan PR026-3-US An alternative to that pen is: amzn.to/32O5pjj I also have a 3D Pen Buying Guide video, which has a link to spreadsheet I made comparing many of these pens.
hi! do you have issues with the fumes/vapors/smells from the burning plastic? I’ve been using a 3d pen for the past few months and started noticing health issues. What type of precautions/ventilation do you use?
I don't use ABS filament. That filament gives off a lot of fumes and has been shown to cause health issues from very long term use. I mostly use PLA filament and some TPU (flexible) filament. You can also use a "solder fume extractor" if you want to direct all fumes away from you. I don't currently do this, but have considered it.
Kayla noya he’s not showing you how to get a 3D pen working lol he’s giving tips very helpful tips if you try these and they don’t work that just means you need to practice more
What other 3D Pen tutorials would you like to see?
Potent Printables what filament are you using? If you could please put a link I would love that. I’m looking for PLA filament. I am going to buy that pen as well because I found it rather useful. Please and thanks in advance. Love ur vids keep it up!😊
I have been using Hatchbox PLA like this link:
amzn.to/2u9h4t1
Keep in mind these are big 1kg spools usually used for 3D printing, so it is a lot of filament for 3D penning.
I have also been using a nice "sample pack" of PLA filament from Amazon Basics, which was 22 colors in smaller amounts for like $30 but it seems to have been discontinued. I will probably next try this sample pack:
amzn.to/2lJkFwX
Hope this helps!
Making flowers
@@1979jurado Great, thanks for the suggestion!
Step by step Mickey mouse
Great series! I was looking for something like this, but just couldn't find it. Until this showed up. Thank you! I would like to see a video about do's and don'ts. Like, "dont use it on this material, it might melt but this material is great for this use" or something like that.
Thank you and glad you found it helpful.
By use on a material, you mean materials that you can and can not pen over with PLA? In other words can you pen over a plastic tupperware container vs a ceramic plate?
@@PotentPrintables Yes! That is exactly what I meant.
↔️ALBANiAN🦅🦅↔️BRiGENi29MALECAj🦅🦅👦🏻↔️💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵💵
Thank you I got a 3D pen a couple days ago this really helped!😁
Thank you , I do alot of FDM. printing, and I will be adding a 3D pen to my tool set , because it's handy to make basic shapes of objects that are much easier to do by hand and to give them a different texture!!
thanks for the vid your the best 3d pener on youtube
Thanks so much! Great video!
These tutorials are really helpful and super cool!
beacuse i just got my 3d pen this is really helpful. thanks!
Hey @Potent Printables do you have a videotutorial for the choral part shown at the intro at 0:08? I've searched for it on your ytchannel but can't find it yet... Hope you'll upload soon. 🤳🏻🙏🏼
Very informative , good job .
Thanks, glad you found it helpful.
I just got to know about your channel. You do great videos! I hope you can do more!
Thanks man now i would try to buy a 3d pen,this tutorial helps me alot thx 😘
Glad I could help!
I want to buy a 3D pen. I’ve never used a 3D pen before and don’t know much about them or how to use it. However, I find it very satisfying and relaxing habit. I watch a few of your great videos for beginners and advanced. Your have a great talent and patient. 😁 What 3D pen do you recommend for beginners and non toxic. Thanks.
I have a video on Buying the Best 3D Pen that tries to lay out what to think about when looking at purchasing a 3D pen. Check that out.
Thanks so helpful!
Very helpful for my child turning 8.🎉
Thanks man :)
No problem, hope it helped!
Nice 😊
I have a question I got a 3d pen for my bday but it is not loading and it is satying at red plz help also its showing numbers and letters
this video helped me alot
Glad to hear that!
I don't yell at my 3d printer for little imperfections as much since I got a 3d pen..
does adding the cooling fan make the part more app to warping, or have you never had any issues with it?
I haven't seen any severe warping issues caused by it. Keep in mind that I'm typically not checking for this though.
Thank you
Its so great
I have 3d pened for about a year and this still helped
are they just for right handed people or are there any left handed ones you'd recommend
Taking a look at the pens I have, it seems like most of them would work for left handed people.
The only thing that would change would be operating some of the buttons with your pointer finger vs thumb.
@@PotentPrintables cool thanks!
I know it is insane!!!!!!!!!!
The one I bought works left handed as well, but I can see the screen as well as I wish I could. It still works very nice and I just do a little turn to see the screen. It’s very nice, quick cooling, comes with 3 small spools, and it doesn’t cost all too much.
MYNT3D Professional Printing 3D Pen with OLED Display www.amazon.com/dp/B01BLQ24IW/ref=cm_sw_r_cp_tai_yVJrEbGJ31F1X
4:30 I have the exact same snips. Did you get those from the CR-10?
Ha, I may have!
@@PotentPrintables btw thank you for the tips. I got the mynt3D super pen, and your videos have helped me figure out what i'm doing.
Awesome, glad to hear that.
tHx this was very useful
Thanks for this it helps me a lot
Good job!!
Thanks!
Thanks! All I can say is BLAAAAAAAADE!
Are you pressing the tip down on the paper? Or do you have it slightly tilted?
Can we create a smooth rectangular sheet using 3d pen?
thanks
What about using ice as a mold
It will melt the ice
What is the red and white molecule looking item on your desk?
Can we use DIY PET bottle recycled filament on these pens ?
Gave u a notification😂 lol
whats your 3d pen?
The pen i go only works for about 10 seconds and then has to jear up again os this normal
Hi from Brazil! Nice tutorial! Please, would you update the link to buy the 3d Pen at Amazon? Or better, would ou tell us the name of the product or manufacturer? Thanks.
Thank you. I updated the link, so it is not broken anymore, but that model is still out of stock. The manufacturer and model number are:
Soyan PR026-3-US
An alternative to that pen is:
amzn.to/32O5pjj
I also have a 3D Pen Buying Guide video, which has a link to spreadsheet I made comparing many of these pens.
Is that a mynt 3D printing pen? I have one. It is white
I just got my pen. QUESTION : Can we use fine sand paper to make it smooth like for making Doll faces?
Yes you can, but it takes a LOT of sanding. I have a video on Smoothing 3D Pen creations. Check that out.
@@PotentPrintables thanks
hi! do you have issues with the fumes/vapors/smells from the burning plastic? I’ve been using a 3d pen for the past few months and started noticing health issues. What type of precautions/ventilation do you use?
I don't use ABS filament. That filament gives off a lot of fumes and has been shown to cause health issues from very long term use. I mostly use PLA filament and some TPU (flexible) filament.
You can also use a "solder fume extractor" if you want to direct all fumes away from you. I don't currently do this, but have considered it.
I have a 3-D pen but it doesn’t stay the color just follows the pen
what are those short pointy snips called ?
Flush cutters. Here is an example:
amzn.to/2GUzqUj
Can you do a starship? Kind of curious how difficult it would be?
Ur 3d pen thumnail is not connected
What 3D pen are you using? I would like to buy the 3D pen you are using
Xtra Flame Gaming wow
Nice tips, for beguinners , that's cool Mate .
sorry if I made some english faults , not my birth language ^^ .
peace .
Glad they were helpful!
Thanksss
Welcome!!
Dang I got my 3D pen and it just rips the paper when I pull it off
Does the 3d pen filament get hotter than a hot glue gun?
Could you get away with using your pen like how a 3D printer uses it's pen, were it starts at the bottom and works its way up peace by peace
Im going to byi 3d pen
Silly buy
Hello new friend nice to meet you go go go
I got a 3d pen today
I got burned by the metal tip on my first time
Be careful, dude.
I've hurt myself so many times use my 3d pen
I am going to make marshmallows helmit wth my 3d pen!!!
yellow m&m
I read “ how to basic “
This takes so much time that it's better to save money first and buy a regular 3D printer instead... Because time is money
Alex Supremo they just work completely different one is graphic design one is sketching
Also why aren’t you wearing finger cap/finger covers?!?! I wear them EVERY SINGLE TIME I use a 3D pen.
sry nevermind
.
It’s hard
James 3:10 From the same mouth come blessing and cursing. My brothers, these things ought not to be so. Also Jesus is king God is king.
👎👎👎👎👎👎👎👎👎👎👎🤛🤛🤛🤛🤛
Booo
Not good 🤮
Why are you like duhhhh
the pens fricken work and your not helping anyone
Kayla noya he’s not showing you how to get a 3D pen working lol he’s giving tips very helpful tips if you try these and they don’t work that just means you need to practice more
Thank You