Thank you so much buddy, I fixed it, my front wheel valve was locked by some red rubber. I removed it and then put slime. Now working superb fine. Thanks a lot.
Thank you heaps. I just got my first puncture from a rusty tack near Sunnybank. I'll follow your instructions, and also take the scooter for a tetanus shot.
Thanks a lot, it worked for my segway ninebot max. Your video was a great help. You are doing a great job. Hope you get lots of subscribers. All the very best.
I’ve inspected my tire, the original black goo come from the rim part, I don’t see no hole at all but when I fill tire it seems to release air from same hole after pump stops, any suggestions? I’m gonna use brake cleaner, put slim in and replace valve, maybe that should work?
Good question Vasu. I personally wouldn’t do it. I would take the tire to a car tire shop and have them do the repair. Or even try a bicycle shop and see if they can repair the puncture.
Sounds like you may have damaged it riding on a flat..? If you haven't fixed it yet, try pumping it up and lay it on the side it's leaking and slowly rotate it for 20-30 minutes adding air as necessary... That *might* fix it
Thanks for the video. I am about to do this. How long did your repair last? Would you do anything differently? How come you didn't use a prevent & repair slime?
Hey there. Thanks for watching. Great questions. It continues to work and I haven’t had any further issues with punctures. I don’t believe I need to do anything different for my personal use, this has been the perfect solution for me. To be honest. I hadn’t heard of the prevent and repair option. Thanks again. Hope this helps.
hey bro my wheel like won’t pump up coz there’s like barely any air and when i pump it it would hold for a day or two then loose psi but now air just won’t go in the wheel bc there’s barely air i think i got a small puncture
Hey LiaMorlzx, thanks fro watching. The issue could be a couple of things, it could be a small puncture, however it could be the valve itself and it may need replacing which I have had to do on both my scooters for the same reason. You may need to try pumping and listening to hear where the air is escaping if possible. Thanks again, hope this helps.
Hey MotoK1d - Mine is also Gen 1. I don't know if we are restricted to the Gen 1 only, however the hack will work. Hope this answers your question. Thanks for watching :)
@@TheWannabeGeek I noticed you're from bundy aswell. I did the region hack and flashed and free-wheeling I'm only getting max of 30km/hr. Should I be seeing 33?
Haha. I am indeed. Yea, the 33km/h was only working without anyone on the scooter. With my teenage daughter, she can get the 33 every now and then. I haven't done the other hack to give more boost. It can damage the motor.
@@TheWannabeGeek how can I get mine to go 33 without anyone on it? Mine never goes above 30 even on full charge. I havnt changed the current draws on the flash I've only changed the speed limits and display battery percentage on display.
My tire just got flat today, valve doesn't make any noise of it leaking, and can't seem to find a puncture If there's a really small puncture can it empty the air of the tire in 3 mins?, because that's what mine does
Hi there. Thanks for watching and reaching out. It is possible. However try wiggling valve to make sure it’s not the valve itself. If nothing is evident, try the slime.
Hye mate, got my first ever flat today on my Ninebot Max (back tyre) and was wondering, why do you recommend using tubeless slime when the ninebot tyres aren't tubeless?
Hey Mr B. Thanks for watching. The G30 Ninebot Max does have tubeless pneumatic tyres. That's how they come standard. au.segway.com/product/segway-ninebot-kickscooter-max-g30/
I used the slime, it didn't work, is it possible there's different versions of the slime, when I pump up the tire up with air, the air starts leaking out before I even take out the valve, do I need like a tire repair kit perhaps? Sorry for bothering you my man but I'm really in a Jam
Hi there V1000. Thanks for watching. There are different versions. U need a tubless tire slime. I got mine from our local auto parts dealer and they advised the one I got.
Good video, but try to repeat the info less at the start of the video. So far youve repeated 3 different things. Dont waste peoples time or they will just click on. Also your audio is very low, especially compared to the ads. Keep it up.
Thank you so much buddy, I fixed it, my front wheel valve was locked by some red rubber. I removed it and then put slime. Now working superb fine. Thanks a lot.
Glad it’s working for you. Have fun 😀
Do you need to remove that red rubber ??
Thank you heaps.
I just got my first puncture from a rusty tack near Sunnybank. I'll follow your instructions, and also take the scooter for a tetanus shot.
Thanks a lot, it worked for my segway ninebot max. Your video was a great help. You are doing a great job. Hope you get lots of subscribers. All the very best.
This is amazing but can you please create many more Videos like this, I hate waiting so long for great content :)
Bahaha. Thanks Shaun. Will do. Great to have met via Ausflightsimmer.
Can i use puncture repair kit
did the tire slime react to the original tire sealant that the ninebot tires comes with already? how long did the fix last?
I’ve inspected my tire, the original black goo come from the rim part, I don’t see no hole at all but when I fill tire it seems to release air from same hole after pump stops, any suggestions? I’m gonna use brake cleaner, put slim in and replace valve, maybe that should work?
I had a question: does the car tire plug work? I have had a nail in tire and once I removed it it has a slow leak.
Good question Vasu. I personally wouldn’t do it. I would take the tire to a car tire shop and have them do the repair. Or even try a bicycle shop and see if they can repair the puncture.
I had of hit by a car and that had busted my tire would this work the same way?
Probably not. This is best for smaller punctures. I would suggest taking it to a bike mechanic they maybe able to assist.
Nice work! Great video and eay to follow. Cant wait to see the next one!!
Thanks Mate. Glad you enjoyed it… Prepping one already. :)
Where did you buy the valve?
Hey there Jesus. This is where I purchased my valve from. It was off eBay. No affiliation associated with this link. www.ebay.com.au/itm/353536163148
Great tutorial. Now to go watch your hacking video again
Haha. Thanks mate. Greatly appreciated. Make sure you skip the first bit. Lol not many people like my “sense of humour “ at the start. Lol.
What happened if it just blew out some of the sealant from riding on low pressure? I tried refilling it but it slowly leaks around the rim still
Sounds like you may have damaged it riding on a flat..? If you haven't fixed it yet, try pumping it up and lay it on the side it's leaking and slowly rotate it for 20-30 minutes adding air as necessary... That *might* fix it
Thanks for the video. I am about to do this. How long did your repair last? Would you do anything differently? How come you didn't use a prevent & repair slime?
Hey there. Thanks for watching. Great questions. It continues to work and I haven’t had any further issues with punctures. I don’t believe I need to do anything different for my personal use, this has been the perfect solution for me. To be honest. I hadn’t heard of the prevent and repair option. Thanks again. Hope this helps.
hey bro my wheel like won’t pump up coz there’s like barely any air and when i pump it it would hold for a day or two then loose psi but now air just won’t go in the wheel bc there’s barely air i think i got a small puncture
Hey LiaMorlzx, thanks fro watching. The issue could be a couple of things, it could be a small puncture, however it could be the valve itself and it may need replacing which I have had to do on both my scooters for the same reason. You may need to try pumping and listening to hear where the air is escaping if possible.
Thanks again, hope this helps.
@@TheWannabeGeek i also got a lot a burnt rubber on my wheels coz my mate was messing with it how do i clean it
Can u email me a pic? Be best to have a look at it.
Hey mate can I ask... I got one new from jbhifi today. My motor is gen1. Are we restricted to gen1 in Australia? Quite disapointing
Hey MotoK1d - Mine is also Gen 1. I don't know if we are restricted to the Gen 1 only, however the hack will work. Hope this answers your question. Thanks for watching :)
@@TheWannabeGeek I noticed you're from bundy aswell. I did the region hack and flashed and free-wheeling I'm only getting max of 30km/hr. Should I be seeing 33?
Haha. I am indeed.
Yea, the 33km/h was only working without anyone on the scooter. With my teenage daughter, she can get the 33 every now and then.
I haven't done the other hack to give more boost. It can damage the motor.
@@TheWannabeGeek how can I get mine to go 33 without anyone on it? Mine never goes above 30 even on full charge. I havnt changed the current draws on the flash I've only changed the speed limits and display battery percentage on display.
Hey Motok1d. I'm looking into that at the moment. Will let you know if I find out how.
My tire just got flat today, valve doesn't make any noise of it leaking, and can't seem to find a puncture
If there's a really small puncture can it empty the air of the tire in 3 mins?, because that's what mine does
Hi there. Thanks for watching and reaching out. It is possible. However try wiggling valve to make sure it’s not the valve itself.
If nothing is evident, try the slime.
my tyre went totally flat after not riding for 3 days? do you know what I should do? i pump it up and it holds for a day or so - then loose psi?
Hey there, you should do what i have shown in this video. I believe that this should fix the problem. This Slime is magic stuff.
@@TheWannabeGeek I'm thinking I need to do exactly what's in your video 🙏🙏
@@LAMethWitch Would love to hear how it goes for you.
@@TheWannabeGeek ok- I baught pink slime - injected it into the tyre- spun the wheels - and looks like im good to go again!
@@LAMethWitch awesome, hopefully it holds for you… Let me know how u go :). Well Done
When are we getting more videos?!
Can I get this slime from super cheap auto
Sure can Jedi. I got mine from Auto Barn. But Super Cheap have it as well.
Thanks for the video !!!
No worries Ivan hope it helps
Hye mate, got my first ever flat today on my Ninebot Max (back tyre) and was wondering, why do you recommend using tubeless slime when the ninebot tyres aren't tubeless?
Hey Mr B. Thanks for watching. The G30 Ninebot Max does have tubeless pneumatic tyres. That's how they come standard. au.segway.com/product/segway-ninebot-kickscooter-max-g30/
@@TheWannabeGeek ohhhh 🤦♂️ my bad. Thanks, bro!
I used the slime, it didn't work, is it possible there's different versions of the slime, when I pump up the tire up with air, the air starts leaking out before I even take out the valve, do I need like a tire repair kit perhaps? Sorry for bothering you my man but I'm really in a Jam
Hi there V1000. Thanks for watching. There are different versions. U need a tubless tire slime. I got mine from our local auto parts dealer and they advised the one I got.
valve core bro the stem is the rubber outside bit
Thanks Damo. You're a Goodfella by name and nature.
Hope you enjoyed the video. Tha ks for watching.
Thanks so much for sharing @The Wannabe Geek Just what I needed
Thanks Dave Glad you enjoyed the video. You’re legend.
@@TheWannabeGeek Yeah Nah
I can’t understand why you don’t think you’re a legend. You can’t say you’re not 🤣
Great video but please make some more...please please please. I can't wait months between each one 😞
Ahaha. Thanks warrior. I’ll be on to it for sure.
Now go tell Shane to do a collab with me. In the plane together. 🤣
I have a puncher resistant ❤tube no problem ps the green goo makes the whole tyre unbalanced
So i would not use it is ts only emergency ONLY
😂 that is the valve from the valve stem do not remove the valve stem 😮
im 116kg and use about 46psi
I was 118KG a couple of months, down to about 108 now, and still dropping (hopefully) lol, but it does help to have more air in the tyres.
@@TheWannabeGeek that's great, I want to get under 100kg for the sake of my scooter and extra acceleration 😀
@@LAMethWitch Haha, that is what i think every time I get on it.. .I’m think, oh this poor thing!!! Lol… Have an awesome week.
Good video, but try to repeat the info less at the start of the video. So far youve repeated 3 different things. Dont waste peoples time or they will just click on. Also your audio is very low, especially compared to the ads.
Keep it up.
Thanks Smash Moore… Slowly getting there 😀 learning with each video as I go. Thanks for the feedback
🥰
Glad you liked the video. Thanks for watching.
A Geek 🤓 would not know that it's a valve From the valve stem
This isn't "repair". This is "put sealant in the tyre".
Which repaired it 😂 thanks for watching
this is not a repair