Honda 305 Oil Sling Installation: Motorcycle Engine Rebuild CB77
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Let’s make sure we get that oil sling installed correctly on the Honda 305 CB77 motorcycle. Nuances matter! Big thanks to the K.O.W. Community for the assist.
‼️Actually it’s both. I’ve opened three of these that were NEVER opened or cleaned before and they ALL have two DIFFERENT washers, one for the inside and one for the outside of the shaft.
Wouldn’t be the first time I’ve found a big error in their diagrams from that era.
It was a deep dive for sure with lots of conflicting info. Two makes sense. I think I landed on this based on Bill Silver’s input. I have another 305 to year into, I’ll be looking closely when I do. Nuances definitely matter!
The CB175 also has countersunk screws in a similar position, they have small O rings under the head to stop any oil leakage. This looks very similar, why else would Honda use a different type of screw? If it weeps oil there's your answer.
Yup. The books had conflicting info. It was a puzzlement
Why bother with that,just install the Cappellini Filter. No more chain and better oil Filter!
That’s always an option too but I think this will be just fine as originally designed.
Your videos have helped me so much! Thank you
I’m so glad to have been able to help.
what Bill Silver manuals do you have have for the CB77?
I bought the downloads off the website. It’s a Dropbox download. Tons of files.
@@KeepOnWrenching what site is it?
VintageHonda.com
With the washer/shim at the wrong place, you should be able to see a slight mis-alignment of the filter chain.
Also, tightening crankshaft end nuts with a shock spanner is not good enough. I use a medium-size battery impact gun
- I have a good feel of mine, not to worry. BTW I used to ride a CB77 back in '67-'70, would sell my soul to get a good one today.
Please double-check all the engine bolts torque values.
Thank you for the recommendations
Oh man I feel that though lol dropping a bolt and it just instantly disappears xD
It seems inevitable lol
Nice video ,i think you are correct ,there should be an other washer on behind ,or the does the the assembly spin against the shoulder without the the washer ?
Right? Nowhere are two referenced tho. I’ll trust Bill Silver on this one.
I second that...why not 2 washers?? ...one on the inside to protect the case and one at the pin?
I dunno. I’m gonna trust Mr. Honda Bill Silver on this one.
When you work on things you need a photographic memory.
The washer was actually on the inside when I took it apart.
@@KeepOnWrenching FINDING THE PART IS BETTER THAN BUYING ANOTHER PART.
Could you please detail how this filter is serviced/cleaned? Thanks!
Just gotta remove the 3 JIS on the cover, pull it..get the snap ring out, pull the cover and clean the interior of the barrel. Reassemble.
Good job
Thanks, Chick. Glad it got sorted.