2011 FORD RANGER V6 CHANGED FILTER IN 5 MINUTES. no special tools needed for me just push in connectors to filter and use fingers to push in tabs. slid right off and new one went on easy.
Thank you for watching our auto repair video that shows you how to replace the fuel filter on a Ford Ranger. Don't forget to sub the channel. Have a great day!
I’m having trouble with either my fuel pump or fuel filter. How did you differentiate between knowing if you needed to switch out your filter or pump, or maybe you did both?
If you remove the cap it will let the pressure out on the system. You can also either disconnect the battery or remove the fuse to the fuel pump so that there is not power to it. Hope this helps you out.
Hey question I just did this on my mazda b series just replaced the fuel filter and forgot to take off cap Could that be why my trucks not starting now jw
Not sure, make sure that the flow is going the correct way and the filter isn't in backwards. There might be a directional arrow on the filter somewhere.
Yo tengo un Ford Ranger 2004 motor 2.3. estándar y ando buscando una de las mangueras que llegan al filtro de gasolina la que se conecta a la parte del filtro que es más larga osea la que tiene el punto verde donde la pudiera encontrar plese
@Hey amigo speako burrito? The ranger should have a fuel shutoff switch on the floor under the glovebox on the passenger side. You can trip it there and then reset it as well once you're done
had to blow out all the rocks sand before i could press the clips i, then i put some heat shrink on and black tape to stop from getting rocks sand in clip area.
It does not but you should relieve the pressure by removing the gas cap to the gas tank. A little gas may come out so you may want to get an old clean bucket that you can contain it in and then pour back into the tank. May sure it's something clean that the gas will not eat through. Hope this helps you out.
Homeowner Repair. I. Think. The one in the gas tank. The fuel pump because. I would always. Put gas would it goes less then a 1\4 of gas. So. Maybe the fuel pump is bad
@@HomeownerRepair Hey so it turns out that my truck requires the fg1033 model of fuel filter or else it wont fit. Even the Ford dealerships part that they use to replace my filter leaked gas. Had to order and original FG-1033 Motorcraft filter off ebay and finally after 2 weeks of waiting I have clean fuel and no leaks. Truck is a 2001 Ford Ranger Edge 3.0 made In may of 2001.
Buy Replacement Fuel Filter From Our Amazon Store: amzn.to/2QMDwDg
man.. Were a ford expedition..?
Awesome. Those hose pliers look to be the trick I was looking for. Thanks for the video.
I'm glad you found the hose pliers helpful! They really can make a difference in those tricky situations.
exactly what i was looking for. appreciate the links to the part and the pliers. well done!
Thank you for watching our auto repair video that shows you how to replace the fuel filter on a Ford Ranger. Have a great day!
OMG you guys make it look so easy, I fought with those quick connects for almost 2 hrs
They can be a pain sometimes.
You need his pliers.
Quick connect, aye? A misnomer.
@@dduncan51 they are quick connect, not quick disconnect. Vehicles are designed to be built cheap and quick.
They always do
Thank you
For posting this I had to replace my filter and was haveing trouble with the clips
But after watching this I had no problem
Thanks for watching
That pliers looks dandy
2011 FORD RANGER V6 CHANGED FILTER IN 5 MINUTES. no special tools needed for me just push in connectors to filter and use fingers to push in tabs. slid right off and new one went on easy.
Thank you for watching our auto repair video that shows you how to replace the fuel filter on a Ford Ranger. Don't forget to sub the channel. Have a great day!
I’m having trouble with either my fuel pump or fuel filter. How did you differentiate between knowing if you needed to switch out your filter or pump, or maybe you did both?
Remove the fuel cap? Others are saying remove the fuel fuse too, necessary or not?
If you remove the cap it will let the pressure out on the system. You can also either disconnect the battery or remove the fuse to the fuel pump so that there is not power to it. Hope this helps you out.
Right on brother ! Thanx ! 😎👌
Any time!
Love your accent! Thanks for the help bro
No problem 👍
Great vid thanks!
Glad you liked it!
I used a small pair of channel locks, worked easily.
Thanks for watching. Don't forget to sub the channel to for more videos like this!
Great video, thanks for the info 👍
Glad it was helpful!
perfect, direct and to the point
Thanks for watching
Great! Can't wait to get a lift out front 2 replace mine.😂
Thanks for watching
Not sure if it's my fuel pump or my fuel filter or my fuse relay this vid sure helps-tnx...
Thanks for watching glad this has helped you out!
Is there a replacement clip for those kind on fittings? The regular push on clips will not work on those.
You might be able to get one at the auto parts store or the dealer.
Hey question I just did this on my mazda b series just replaced the fuel filter and forgot to take off cap
Could that be why my trucks not starting now jw
Not sure, make sure that the flow is going the correct way and the filter isn't in backwards. There might be a directional arrow on the filter somewhere.
Perfect video. Well done 👏
Thanks for watching! Don't forget to subscribe!
Good job mine is next 😂!
Thanks for watching. Hope this helps you out.
I hate to ask this but are there arrows on the filter showing the flow of fuel?
I forget if this particular one has the direction of the flow indicated on it..it should
Well done 👌
Thanks 😁
your beck-arnley fuel filter is it made in usa or canada?
Not sure
What do you call those pliers?
They are hose pliers. Here is a link to them amzn.to/42xYXLl
Do you have a Ford Ranger? Needing help with ground wires for ignition issues
If you look online you may be able to find a wire diagram for the truck that shows all of the circuits.
How do i purge the system? And what's the tool u use ?
Open the gas cap
Yes, You can remove the gas cap to relieve pressure in the system.
Does the tank have to be empty to do this? What does leaving the gas cap off do?
You do not have to empty the tank. You need to remove the gas cap to relieve pressure in the system.
Yo tengo un Ford Ranger 2004 motor 2.3. estándar y ando buscando una de las mangueras que llegan al filtro de gasolina la que se conecta a la parte del filtro que es más larga osea la que tiene el punto verde donde la pudiera encontrar plese
Si acude a su concesionario Ford local, debería poder solicitarle una manguera de repuesto. Espero que esto ayude.
Better to turn on the truck and then pull out the fuel pump relay until it dies out then replaced the filter
Thanks for the added tip. Either way will work.
@Hey amigo speako burrito? The ranger should have a fuel shutoff switch on the floor under the glovebox on the passenger side. You can trip it there and then reset it as well once you're done
@@firemanflorencethanks papa
Thanks so much for this video!
Glad it was helpful!
had to blow out all the rocks sand before i could press the clips i, then i put some heat shrink on and black tape to stop from getting rocks sand in clip area.
Thanks for watching! Don't forget to subscribe!
Be careful not to wrap it tight enough to depress the clips or leak could happen.
Can you link the tool used I this video i can't find it
Sorry just saw this reply.
Nice!!!!
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Have o rings coming out of clips?
If there out o rings this should be covered in the video.
Does the gas tank have to be empty
It does not but you should relieve the pressure by removing the gas cap to the gas tank. A little gas may come out so you may want to get an old clean bucket that you can contain it in and then pour back into the tank. May sure it's something clean that the gas will not eat through. Hope this helps you out.
you mentioned it's a 2002 ranger. what engine does it have, and fuel filter part no.
The Ford Ranger has a 4.0 in it.
I changed my fuel filter could. The fuel pump be. The cause my truck not to start
There should be a flow arrow in the new filter. Make sure it is going in the right direction.
Homeowner Repair. I. Think. The one in the gas tank. The fuel pump because. I would always. Put gas would it goes less then a 1\4 of gas. So. Maybe the fuel pump is bad
👍
Thanks for watching.
Did the same thing with 3 different brands all pissing gas everywhere
The connections sound like they may not be seating properly.
@@HomeownerRepair Hey so it turns out that my truck requires the fg1033 model of fuel filter or else it wont fit. Even the Ford dealerships part that they use to replace my filter leaked gas. Had to order and original FG-1033 Motorcraft filter off ebay and finally after 2 weeks of waiting I have clean fuel and no leaks.
Truck is a 2001 Ford Ranger Edge 3.0 made In may of 2001.
Buy the pliers.
Thanks for watching.
The pressure should have been relieved
Thanks for watching
Quick my ass they are a pain
They are a pain.