*Thanks for watching! Let me know what you think of the video and what else you want to see on the channel!* 👉 Check out my comparison of the Flame King vs Mr Heater Big Buddy: th-cam.com/video/p85DjS9vRMs/w-d-xo.html
Maybe I don't know enough about electricity but wouldn't an easier hack be to get a DC power adapter 5.5x2.1 female jack that converts to a male 5.5x2.5 male plug to fit on the USB 6v cord you suggested and just utilize the DC jack that's built into the unit without having to cut any wires or taking it apart?
Absolutely another way you can do it yes! The reason I went this way is so that I could keep everything contained inside of the unit running off the power pack and without having a plug sticking out of the back. I can already see that getting busted off quickly the way I use these heaters outdoors unfortunately.
Yes, functionally for producing consistent heat, adjusting the temperature output with the dial and lighting without issues it works great. Still putting it through it's paces though so want a bit more time with it then I will put out a review video. For instance, the fact that the 1lb connection on these heaters do not swivel is actually a bigger pain then I originally thought
Alex, I found this video to be just what I was looking for. I have a Big Buddy that I was running a different battery setup in one of the canister compartments and this solution works a lot better. I can confirm that the INIU Portable Charger, 10000mAh Power Bank (Your First Link) fits perfectly in the battery compartment of the Big Buddy heater. So thank you for posting this video! I just wanted to put this here in case someone else was running the Big Buddy and not the Flame King heater.
@@AlexTimm I did have to mod the battery space a hair after receiving the USB adapter it was a hair bigger than one I had tried first, but still fits with a little plastic removal!
I have the 10k but no fan when I turn the knob after lighting pilot light, to flames on ceramic it's at the 5 o'clock position flames will periodically engulf the bottom too. I quickly turn off and relight pilot light or turn the propane tank off. Is the pilot light not touching the ceramic plate causing this does not heat ceramic panel unless I go to 5 o'clock position then flames the whole thing? Any tips ? Ty
This is interesting and all but wouldn’t it be far easier and better to just get the dewalt version of the mr heater? The dewalt version obviously just uses the dewalt batteries and has a light on it as well. Also so far what is you favorite version of all these heaters so far that you own?
That Dewalt heater is definitely an option, but does limit you to that specific heater and none of the others on the market as well as needing to have Dewalt batteries. I do know a few people that have that heater (and multiple of the batteries) and really like it! Just about to start using the heaters a lot as that season is finally arriving, so I get to get some hands on use with these Flame King heaters, of which I think I'm going to really like the 20k BTU heater, but the good old trusty and reliable Big Buddy is my default as of now if I could only have 1
i don't see the need to cut the connection for the 6v dc port. if you leave it then you can use the 6v dc plug to recharge your battery pack. As long as the 6v dc is regulated it will recharge your lithium pack. The battery pack has built in safety switches to shut down the charge cycle when the pack hits a targeted voltage.
Hey Charlie, I have not yet, but will as soon as we get ice here in MN. The heater just came out a few weeks ago so didn't get a chance to use it at all last season either. I'm hoping for some lakes within a driving distance of me to have fishable ice by middle of November (or earlier if I get lucky!). I'll do a review once I get some time out on the ice with it for sure!
Absolutely, I personally haven't done it so not sure if the wires are setup the same, but there would be no issue doing it with that heater too as it also runs off a 6v source
I ordered this 3 times off Amazon and they keep sending me the Ysn- CHS20T..... that is an outdoor only unit. Buyer beware as the sticker on the back says CHS20T. The box says CHS 20 . Wonder how many will find out without a carbon monoxide tester
I did learn one more thing today and that is a co detector and a co2 sensor are not the same and both should be purchased separate from which ever heater you buy if you plan to run it inside your home and they both need battery backup
![[TH] FS vs BME - VCT Ascension Pacific - Lower Bracket Final](http://i.ytimg.com/vi/wnygqsR2Fig/mqdefault.jpg)
*Thanks for watching! Let me know what you think of the video and what else you want to see on the channel!*
👉 Check out my comparison of the Flame King vs Mr Heater Big Buddy: th-cam.com/video/p85DjS9vRMs/w-d-xo.html
Maybe I don't know enough about electricity but wouldn't an easier hack be to get a DC power adapter 5.5x2.1 female jack that converts to a male 5.5x2.5 male plug to fit on the USB 6v cord you suggested and just utilize the DC jack that's built into the unit without having to cut any wires or taking it apart?
Absolutely another way you can do it yes! The reason I went this way is so that I could keep everything contained inside of the unit running off the power pack and without having a plug sticking out of the back. I can already see that getting busted off quickly the way I use these heaters outdoors unfortunately.
Wondering how the operation of the unit itself has done for you. Is it working and as reliable as the Mr. Heater?
Yes, functionally for producing consistent heat, adjusting the temperature output with the dial and lighting without issues it works great. Still putting it through it's paces though so want a bit more time with it then I will put out a review video. For instance, the fact that the 1lb connection on these heaters do not swivel is actually a bigger pain then I originally thought
Just get 8 reachable D batteries you will have a fresh set ready to go and you won't have to break the warranty on the heater to hook the usb cord up
Definitely another route you could go if you wanted
Alex, I found this video to be just what I was looking for. I have a Big Buddy that I was running a different battery setup in one of the canister compartments and this solution works a lot better. I can confirm that the INIU Portable Charger, 10000mAh Power Bank (Your First Link) fits perfectly in the battery compartment of the Big Buddy heater. So thank you for posting this video! I just wanted to put this here in case someone else was running the Big Buddy and not the Flame King heater.
Dan, Thank you for calling that out, and glad it works on the Big Buddy too! GREAT NEWS! Thanks for watching and commenting!
@@AlexTimm I did have to mod the battery space a hair after receiving the USB adapter it was a hair bigger than one I had tried first, but still fits with a little plastic removal!
@@danmckeown10 Great news! Thanks for the update
I have the 10k but no fan when I turn the knob after lighting pilot light, to flames on ceramic it's at the 5 o'clock position flames will periodically engulf the bottom too. I quickly turn off and relight pilot light or turn the propane tank off. Is the pilot light not touching the ceramic plate causing this does not heat ceramic panel unless I go to 5 o'clock position then flames the whole thing? Any tips ? Ty
This is interesting and all but wouldn’t it be far easier and better to just get the dewalt version of the mr heater? The dewalt version obviously just uses the dewalt batteries and has a light on it as well. Also so far what is you favorite version of all these heaters so far that you own?
That Dewalt heater is definitely an option, but does limit you to that specific heater and none of the others on the market as well as needing to have Dewalt batteries. I do know a few people that have that heater (and multiple of the batteries) and really like it! Just about to start using the heaters a lot as that season is finally arriving, so I get to get some hands on use with these Flame King heaters, of which I think I'm going to really like the 20k BTU heater, but the good old trusty and reliable Big Buddy is my default as of now if I could only have 1
Beautiful. ILike options. Thankhz so Much for sharing. Wholeness n Essence of Love ((-;
Absolutely!
I was thinking about mounting a DeWalt battery adapter for 20v drill battery. Too much current? What could i wire in to make it work ?
and you can skip all of this and just buy a USB to 6v dc adapter, great idea tho to run it off a power cell.
Why would you cut the wires, when. You could just put a plug on an old USB cord and use the existing jack?
Man might as well hook up a 20v power tool battery
You could, but would it fit in the side and then a different voltage regulator
Can you send me the info the usb cable and the charger where can I buy it thanks
i don't see the need to cut the connection for the 6v dc port. if you leave it then you can use the 6v dc plug to recharge your battery pack. As long as the 6v dc is regulated it will recharge your lithium pack.
The battery pack has built in safety switches to shut down the charge cycle when the pack hits a targeted voltage.
Not a bad idea, as long as you have a battery pack that can charge through the port you have it plugged into
So, it should be center 6v+ cable or center 6v- cable that I need ? Thank.
If you are cutting the end off it doesn't matter
other than it pulling 6v's, will the usb pack allow you to charge and run at the same time?
Yes the USB pack can charge and run the heater fan at the same time
have you ran the flame king heater out while icefishing at all?
Hey Charlie, I have not yet, but will as soon as we get ice here in MN. The heater just came out a few weeks ago so didn't get a chance to use it at all last season either. I'm hoping for some lakes within a driving distance of me to have fishable ice by middle of November (or earlier if I get lucky!). I'll do a review once I get some time out on the ice with it for sure!
Hi Alex - could I buy a modded Flame King with usb battery pack from you?
Hey, unfortunately I'm not modding any at this point for sale. Thanks for asking though!
your great at making videos !
Thank you so much! 👍
Nice demonstration.
T M, Glad it was helpful! Thanks for watching and commenting!
Can you also do this to the Big heater buddy?
Absolutely, I personally haven't done it so not sure if the wires are setup the same, but there would be no issue doing it with that heater too as it also runs off a 6v source
@@AlexTimm a how to video would be much received and one that I would most certainly watch. Thanks for the reply,have a blessed day.
@@Jennifer-wm9pe If I do this on one of those I will make sure to make it into one!
@@AlexTimm is the power bank 6 volt also?
Excellent hack!!!
Thanks!
I ordered this 3 times off Amazon and they keep sending me the Ysn- CHS20T..... that is an outdoor only unit. Buyer beware as the sticker on the back says CHS20T. The box says CHS 20 . Wonder how many will find out without a carbon monoxide tester
Have you tried reaching directly out to Flame King? I can't find any documentation on the CHS20T
I did learn one more thing today and that is a co detector and a co2 sensor are not the same and both should be purchased separate from which ever heater you buy if you plan to run it inside your home and they both need battery backup