All videos in this series are in this playlist: th-cam.com/play/PLwoDb7WF6c8neIAQBkchfiXf-C8KbzG5M.html Get your FPV Drone DIY Kit at GetFPV: * Analog version - bit.ly/3xajRSN * DJI FPV HD version - bit.ly/3GWB6eV You can also buy a pre-assembled ready-to-fly quadcopter: * Analog version - bit.ly/3aMRx1l * DJI FPV HD version - bit.ly/399nksW
Heya JB! While I haven't built this kit, it looks awesome. I have already recommended it to a couple of folks that were asking about how to get into this hobby. :) Thanks for everything you do! I'd have had a LOT more difficult time getting into this without your incredibly informative videos.
I'm gonna tell you how good JBs videos are. I've been building long enough that I don't really need to watch. So why was I glued to all (5) videos in this series? Frankly on the off chance I might learn one more nugget - and in this case I realized that I don't add strain relief to my power cables. The second, and most important reason, is that its just fun to hang out with and hear JB explain it in his way. Honestly, I just get inspired with the enthusiasm. Fantastic sign off too!!
I was just going to say (mostly) the same. In my case, the nugget was that yaw works in turtle mode; for 3-ish years, I've used it with pitch and roll, but never thought to push the yaw stick. Knowing that would have potentially made the video that I'm currently rendering mostly obsolete (spoiler: I spent over a week getting a quad out of a tree and had to "invent" a tool to help me do so.) Not sure if turtle mode on yaw would have _necessarily_ helped, but it could have. Now I know for next time 🙂
Would you believe if I said that I almost cried when JB said that little closing message. Really brought out an emotion that I never thought existed. Been in this hobby for over 4 years now and just realised what a game changer has it been in my life, maybe in small and subtle ways but in a way for sure.
Bought kit, followed tutorial, could barely solder, stripped screws, couldn't flash with the EdgeTX passthrough, decided it needed the Medlin Drone FPV gimbal, followed that video too, got all that CLI code wrong a million times, finally everything is working, I maiden the drone fly for 5 minutes, become disoriented, failsafe, drone crashes, FC is fried, reorder that thing, and rewatch the entire bit about configuring the FC. Finally it's all working again and I've ordered parts to build another drone from scratch because if I crash this one I at least would like to fly another one while I wait for parts. 10/10 would highly recommend! JB's videos are the only reason I even attempted this, I'd have been so lost in the sauce without these as reference, even though my build didn't go exactly like the video it was enough for me to use the right terminology and go looking in the right places to get the results I wanted (minus the bad piloting).
JB is legit the saint of FPV. He has so many useful easy to digest videos on pretty much anything. He does it with a smile and adds in mistakes and tips. Truly a great man!
I am about to build a drone, from scratch for the first time. I picked a Lumenier QAV-PRO Micro Whoop. And this series has been very helpful Thanks JB 👏👏
Great again as usual. One other thing I do when battery mounting is to insure to position the battery to balance the center of mass so that the weight balance point is aligned with the center of the X frame. A poorly out of balance quad either too front or aft heavy will require those motors to work harder in level flight and such will reduce your maximum speed. The speed will be constrained by the most demanded motor(s) upper limits.
Thank you for all you do for this community! I love your closing thoughts, I think that if I had the whole picture of just how challenging this hobby is before I started, it would have scared me off. However, jumping in not knowing what I was getting into and addressing those issue and challenges one at a time as they kept coming has been so immensely rewarding. I can't wait to build my first 5 inch quad almost half a year after watching 14 minutes of Steele trying to dive a ladder, finding freestyle, and realizing that FPV was more than just DRL and racing.
@9:27 So, just finished my first build in 8 years, brand new O3 unit, followed your instructions, went outside to the side yard to hover test safely, and my quad demanded to immediately go swimming. js, kind of wish I did the test inside. That's my fault though, just bummed. Thank you for everything you do for us Joshua!
Hello Joshua I am having a problem with my xm+ reciever . It wont bind and when i try to flash the reciever the radio says (FW update error Not responding) ?
Great series!! I was a beginner 6 months ago, and so many of your vids helped me along the way. Thank you! And congrats to new pilots/quad builders, happy ripping :)
Today, i learned something ! Thank you for the turtle mod lesson. I never managed to work and retrieve a quad without moving myself. Now i just have to wait for buying this quad (and upgrade to digital)
The new build, using the QAVS frame is head and shoulders better than the first XILO frame and build. This quickly became my favorite frame last year, followed closely by the Moxy (Bubby) from rotor riot. The bubby is indestructible. This frame is a pseudo copy of the apex, which is twice as much. I made a video (bitchy and whiny) about bardwell pushing his first drone package, which really wasn't great, but reluctantly went to his 'ultimate freestyle build' which this ended up copying (sort of) and it was head and shoulders better. I don't agree that the best way to learn to fix your drone is to build your own initially. It is too much for most beginners, but when you do decide to build a drone, this is an excellent option.
Congrats Pilots 🎓️ gr8 series! much respect for effort put into the vTX & optional DJI controller part(s), TIMELINE must have been a nightmare Nailed it!
Thank you! I have finally finished. I am still scared that the quad will run away, I did watch the video about why the motors will spool up on the bench. So crossing my fingers.
Good job with the explanation. I have that question asked all the time. I also love you have the same xt60 issues as the rest of us. Wish this build was around when I started.
Inspiring and educational! Thank you so much JB! You made it simple for someone who is starting. Just a question: with battery, how much does it weight? Thank you so much!
Ummaagrip and 2 straps for sure... I order from rdq so I have a lifetime supply of straps. And I don't think I broke one rdq strap ever.. they do fray eventually though
I strictly DO NOT buy freestyle frames that do not have some sort of space for the XT60 either through the front or rear of the the top plate. I'm not trying to bash the product Bardwell and this is a GREAT series as always but that's just a pet peeve of mines. I really wish more frame designers took the xt60 lead into account when coming up with designs
Hey JB, the tutorials are great and I am looking to get in to the hobby. is there a FC you would recommend with GPS? looking for a return to home function.
You should be looking at iNav firmware and the FC that support iNav, if you care most about GPS return to home. Betaflight return to home is pretty basic and not as reliable as I would want.
Just one question I just got a few lipo batterys to start fpv but when i plug them into my battery charger there is a pop and little spark Is this bad?
Thank you for all your work Bardwell! I've been in the hobby for years, but I like build videos so I watched this one. Your words at the end are so true and inspiring. I must agree, a very big congratulations to those who completed their first build! Welcome to the hobby, my friend :) PS I notice this video is unlisted haha. Early views!
Hey Joshua, your videos are really helpful and informative for me as a beginner. Thanks for that! I've just started getting into FPV and decided this drone to be my first build since I don't really know about compatibilities with the FC, ESC, motors, etc. and wanted to get to know my first drone inside out in case something goes wrong :D But I've got two questions right now: I bought the Taranis X9 Lite S and wondered if I should go with the XM+ receiver to just get started for now or if I should rather get the ELRS module for the radio and ELRS receiver to have it easier to follow the tutorial and get into things? The second question is if I could change the receiver from the XM+ to the ELRS later or is that not possible? Thanks in advance to anyone who can help me ^^
Right my build is done everything looks solid motors are spinning did all the flights test and hover waited a bit longer just in case then the rear left motor just cuts out as im just hovering any thoughts is my motor toast nothing looks like its connected together im at a lost HELP
I would like to ask a question, what controllers, goggles and lipo charger would you suggest for somebody that is starting as a beginner and is cheap enough to afford. Thank you
I know it is complicated, but do more of these videos. These are soo goooooooooooood. BTW. I do have an issue with a different build/quad, where it does pop-up in the air with bare minimum throttle position, what could potentially cause this?
This is why I dry-fit EVERYTHING before building... that includes planning out how I want to mount the battery/battery leads. More than half my build time is dry-fitting
I've followed the build to the tee, but as I'm doing final tests I notice I can barely walk 5 feet away without the video feed breaking up and my link quality is like 5. I don't understand why.
@Joshua Bradwell Hi, I’m having trouble with burning up the right rear motor. I was doing initial flight and was able to cover for about 90 seconds but then dropped the throttle to quickly and landed on the back right corner and that sent the motor up in smoke. I ordered two new motors and was just doing some more test flights and made it about 5-7 minutes when I came down and did the exact same thing. Any thoughts? Bit more info, this is my first quad copter away from the DJI Mavic, which practically flies for you lol so it could just be newbie mistakes!
JB I have an issue, I was doing the hover checks and I have no yaw, pitch or roll when at 0 throttle, once throttle is applied I can yaw pitch and roll. Is there something in beta flight or on my controller (Radiomaster T16S MK1) I should check? In betaflight I can see the receiver responding to inputs but nothing when armed at 0 throttle. Thanks in advance Much appreciated.
Missing an ESC? The amount of available ESCs does not match what the flight controller is reporting. This can have multiple reasons: The ESC was not ready yet. This can for example happen if it is playing a melody. Also a previous flash could have gone wrong and it needs longer to boot up than usual. There are simply not more ESCs connected. The MCU of the ESC is defective. Try a different USB cable - sometimes they are not properly shielded and might result in such errors. Should your radio be turned on, try again after switching it on. Switched on radios have been reported to cause issues with electro-magnetic interference and thus failed reads/writes. If the result is not what you are expecting, try clicking the 'Read Settings' button again.
I got this kit got it flying everything’s working except the video for some reason I can only receive video when my antenna is pointing directly at it and I’m less than a foot away and even the the signal is almost zero. So I’m coming here to se if anyone can help
Hello :) I just got my RTF Lumenier quadcopter just like this one. I have a TBS Tango 2 and can not figure out how to bind it to my transmitter, when I plug it into beta flight it says RX_Failsafe/ no valid Receiver signal. The crossfire transmitter has a solid red light. Its kinda funny because my other drone has the same issue. I have no idea what to do, and no-where is there an answer to what i need to do. :( I was hoping the master of all things quadcopter could help me :) idk where else to go.
And no I have no idea how to do that, I am soaking up as much knowledge as I can, but this is one I'm kind of stumped on. with 2 drones :( I'll watch the configuration video/ thank you for responding. You are awesome!
Hey JB, great build. I would like to see a review on the "new" namimno flash ELRS module and receivers, if it's possible for you as soon as the receiver's are back in stock on banggood.
Am trying to fly an FPV and its soo hard to get the hang of it. I have a dji fpv at the moment and in manual mode it just flies off on the simulator and am not able to control it one bit. I eventually plan on moving to the traditional fpvs and want to build my own quad but the controls are just so hard. Any tips on how I can improve? I practice on the simulator and I can’t seem to get the hang of it at all.
Withou you, I would'nt be building a quad today. You're a trully god like professor and every explanation make sense and are clear. A very BIG thank you to you and never stop make us learn something today. Contact me If you want free tpu part. I have a 3d print business :)
All videos in this series are in this playlist: th-cam.com/play/PLwoDb7WF6c8neIAQBkchfiXf-C8KbzG5M.html
Get your FPV Drone DIY Kit at GetFPV:
* Analog version - bit.ly/3xajRSN
* DJI FPV HD version - bit.ly/3GWB6eV
You can also buy a pre-assembled ready-to-fly quadcopter:
* Analog version - bit.ly/3aMRx1l
* DJI FPV HD version - bit.ly/399nksW
Heya JB! While I haven't built this kit, it looks awesome. I have already recommended it to a couple of folks that were asking about how to get into this hobby. :) Thanks for everything you do! I'd have had a LOT more difficult time getting into this without your incredibly informative videos.
I'm gonna tell you how good JBs videos are. I've been building long enough that I don't really need to watch. So why was I glued to all (5) videos in this series? Frankly on the off chance I might learn one more nugget - and in this case I realized that I don't add strain relief to my power cables. The second, and most important reason, is that its just fun to hang out with and hear JB explain it in his way. Honestly, I just get inspired with the enthusiasm. Fantastic sign off too!!
I was just going to say (mostly) the same. In my case, the nugget was that yaw works in turtle mode; for 3-ish years, I've used it with pitch and roll, but never thought to push the yaw stick. Knowing that would have potentially made the video that I'm currently rendering mostly obsolete (spoiler: I spent over a week getting a quad out of a tree and had to "invent" a tool to help me do so.) Not sure if turtle mode on yaw would have _necessarily_ helped, but it could have. Now I know for next time 🙂
Would you believe if I said that I almost cried when JB said that little closing message. Really brought out an emotion that I never thought existed. Been in this hobby for over 4 years now and just realised what a game changer has it been in my life, maybe in small and subtle ways but in a way for sure.
Bought kit, followed tutorial, could barely solder, stripped screws, couldn't flash with the EdgeTX passthrough, decided it needed the Medlin Drone FPV gimbal, followed that video too, got all that CLI code wrong a million times, finally everything is working, I maiden the drone fly for 5 minutes, become disoriented, failsafe, drone crashes, FC is fried, reorder that thing, and rewatch the entire bit about configuring the FC. Finally it's all working again and I've ordered parts to build another drone from scratch because if I crash this one I at least would like to fly another one while I wait for parts. 10/10 would highly recommend!
JB's videos are the only reason I even attempted this, I'd have been so lost in the sauce without these as reference, even though my build didn't go exactly like the video it was enough for me to use the right terminology and go looking in the right places to get the results I wanted (minus the bad piloting).
JB is legit the saint of FPV. He has so many useful easy to digest videos on pretty much anything. He does it with a smile and adds in mistakes and tips. Truly a great man!
I am about to build a drone, from scratch for the first time. I picked a Lumenier QAV-PRO Micro Whoop. And this series has been very helpful
Thanks JB 👏👏
You make it easier to get into such a difficult hobby. Thanks
I've build several quad, and still enjoy watch this video 👍👍👍 it's refreshing for me. Sure.
Great again as usual. One other thing I do when battery mounting is to insure to position the battery to balance the center of mass so that the weight balance point is aligned with the center of the X frame. A poorly out of balance quad either too front or aft heavy will require those motors to work harder in level flight and such will reduce your maximum speed. The speed will be constrained by the most demanded motor(s) upper limits.
Thank you for all you do for this community!
I love your closing thoughts, I think that if I had the whole picture of just how challenging this hobby is before I started, it would have scared me off. However, jumping in not knowing what I was getting into and addressing those issue and challenges one at a time as they kept coming has been so immensely rewarding.
I can't wait to build my first 5 inch quad almost half a year after watching 14 minutes of Steele trying to dive a ladder, finding freestyle, and realizing that FPV was more than just DRL and racing.
Well said!
I really like your build series. I plan to build mine. But this kit is outdated. Some parts are unavailable. Will you do an update? Thanks!
@9:27 So, just finished my first build in 8 years, brand new O3 unit, followed your instructions, went outside to the side yard to hover test safely, and my quad demanded to immediately go swimming. js, kind of wish I did the test inside. That's my fault though, just bummed. Thank you for everything you do for us Joshua!
Hello Joshua I am having a problem with my xm+ reciever .
It wont bind and when i try to flash the reciever the radio says (FW update error Not responding) ?
Amazing flying, Joshua! 😃
Thanks a lot for what you do!
Stay safe there with your family! 🖖😊
Great series!! I was a beginner 6 months ago, and so many of your vids helped me along the way. Thank you!
And congrats to new pilots/quad builders, happy ripping :)
Always learning stuff.. thx JB.
Today, i learned something ! Thank you for the turtle mod lesson. I never managed to work and retrieve a quad without moving myself. Now i just have to wait for buying this quad (and upgrade to digital)
I made it guys. First flight. Such a giddy moment! Immediately found myself tangled in a tree 😂
The new build, using the QAVS frame is head and shoulders better than the first XILO frame and build. This quickly became my favorite frame last year, followed closely by the Moxy (Bubby) from rotor riot. The bubby is indestructible. This frame is a pseudo copy of the apex, which is twice as much.
I made a video (bitchy and whiny) about bardwell pushing his first drone package, which really wasn't great, but reluctantly went to his 'ultimate freestyle build' which this ended up copying (sort of) and it was head and shoulders better.
I don't agree that the best way to learn to fix your drone is to build your own initially. It is too much for most beginners, but when you do decide to build a drone, this is an excellent option.
Thank you Joshua! Great series for beginners.
I watched every video non-stop and I've learned a lot. Thank you
This is great Joshua great job putting this out. Definitely helps the beginners. Your the man . 👊🏻 and I’ll always say it 😉
I haven't watched in a while. Your videos are still great and your flying has gotten even better.
Keep up the good work!
Congrats Pilots 🎓️
gr8 series! much respect for effort put into the vTX & optional DJI controller part(s), TIMELINE must have been a nightmare
Nailed it!
i am so rergret that i havent seen theese videos when i was getting un the hobby. I had looots of problems with my first quad
cool looking mustang over there
In this video at Frame: 5:35, I have my Battery Lead come under the rubber band that's around the battery. I've never chopped a battery since.
Thx for your content. I think you are a really good teacher. It appears you put a lot of thoughts in how to transport information.
Thank you! I have finally finished. I am still scared that the quad will run away, I did watch the video about why the motors will spool up on the bench. So crossing my fingers.
How is this drone comparing to the Diatone Roma F5 V2 analog ?
Good job with the explanation. I have that question asked all the time. I also love you have the same xt60 issues as the rest of us. Wish this build was around when I started.
Awesome video series JB!
this is what i want to learn thanks for the very informative video tutorial.
Hi One Love I have just finished my new Build Great Video .
What goggles are recommended for this build? Preferably on the cheaper side.
They're listed at the GetFPV product page or you can check my web site www.fpvknowitall.com.
Inspiring and educational! Thank you so much JB! You made it simple for someone who is starting. Just a question: with battery, how much does it weight?
Thank you so much!
Very helpful video. Thanks a lot.
Ummaagrip and 2 straps for sure... I order from rdq so I have a lifetime supply of straps. And I don't think I broke one rdq strap ever.. they do fray eventually though
I've built several quads but still watched every minute of this series very entertaining
I strictly DO NOT buy freestyle frames that do not have some sort of space for the XT60 either through the front or rear of the the top plate. I'm not trying to bash the product Bardwell and this is a GREAT series as always but that's just a pet peeve of mines. I really wish more frame designers took the xt60 lead into account when coming up with designs
Hey JB, the tutorials are great and I am looking to get in to the hobby. is there a FC you would recommend with GPS? looking for a return to home function.
You should be looking at iNav firmware and the FC that support iNav, if you care most about GPS return to home. Betaflight return to home is pretty basic and not as reliable as I would want.
I am building your quad. It's my first 5 inches... till now only micro and woops... Let's freestyle!!
thanks JB,my fc with others are on the way.
You inspire me a lot👍
with best love and care from india
Great content
Just one question
I just got a few lipo batterys to start fpv but when i plug them into my battery charger there is a pop and little spark
Is this bad?
That's perfectly normal, happens all the time. it also pops when you plug it into a quad.
Thank you for all your work Bardwell! I've been in the hobby for years, but I like build videos so I watched this one. Your words at the end are so true and inspiring. I must agree, a very big congratulations to those who completed their first build! Welcome to the hobby, my friend :)
PS I notice this video is unlisted haha. Early views!
Hey Joshua, your videos are really helpful and informative for me as a beginner. Thanks for that!
I've just started getting into FPV and decided this drone to be my first build since I don't really know about compatibilities with the FC, ESC, motors, etc. and wanted to get to know my first drone inside out in case something goes wrong :D But I've got two questions right now: I bought the Taranis X9 Lite S and wondered if I should go with the XM+ receiver to just get started for now or if I should rather get the ELRS module for the radio and ELRS receiver to have it easier to follow the tutorial and get into things? The second question is if I could change the receiver from the XM+ to the ELRS later or is that not possible? Thanks in advance to anyone who can help me ^^
Personally I'd say just go elrs.
@@JoshuaBardwell okay, thanks for your opinion ^^
I was given one of these with two batteries. I have no experience and no charger and no remote control. Where do I start?
how do i mount my hero black 5 on this build
Hi! When is going to be back on stock so I can buy it?
What goggles are they if they are hdzeros how much are they to get in Australia
Right my build is done everything looks solid motors are spinning did all the flights test and hover waited a bit longer just in case then the rear left motor just cuts out as im just hovering any thoughts is my motor toast nothing looks like its connected together im at a lost HELP
is it advisable to add feet to it like on dji avata?
I would like to ask a question, what controllers, goggles and lipo charger would you suggest for somebody that is starting as a beginner and is cheap enough to afford. Thank you
Please check my web site www.fpvknowitall.com
DJI FPV ftw lol
Joshua, my vtx is set at 600mw, but i only get video when my diversity antennas are a few centimeters away from the axii antenna. any help? thanks
Is there a reason you didn't go straight out the back of the drone with the battery cable?
There isn't much room between the digital vTX and the top plate. With analog vTX it could work.
hi i was just wondering what action camera you used for this buile and if it could support a full size gopro hero 9 thanks alot
Yeah absolutely it can handle a hero 9 but it'll fly better with a lighter camera like hero 11 mini
I know it is complicated, but do more of these videos. These are soo goooooooooooood. BTW. I do have an issue with a different build/quad, where it does pop-up in the air with bare minimum throttle position, what could potentially cause this?
D term high?
This is why I dry-fit EVERYTHING before building... that includes planning out how I want to mount the battery/battery leads. More than half my build time is dry-fitting
1000 views on an unlisted video.
means at least 1000 people watched the previous video to the end and clicked the title card.
Pretty darn good
I've followed the build to the tee, but as I'm doing final tests I notice I can barely walk 5 feet away without the video feed breaking up and my link quality is like 5. I don't understand why.
Is the vTX in pit mode? Here's how to tell th-cam.com/video/jUPppjrZdxs/w-d-xo.html
@Joshua Bradwell Hi, I’m having trouble with burning up the right rear motor. I was doing initial flight and was able to cover for about 90 seconds but then dropped the throttle to quickly and landed on the back right corner and that sent the motor up in smoke. I ordered two new motors and was just doing some more test flights and made it about 5-7 minutes when I came down and did the exact same thing. Any thoughts? Bit more info, this is my first quad copter away from the DJI Mavic, which practically flies for you lol so it could just be newbie mistakes!
Please contact support@getfpv.com. You might have a bad esc
@@JoshuaBardwell copy that, thanks for getting back to me ☃️ cheers.
Hey did get fpv do anything because I burnt three motors before my esc burnt
JB I have an issue, I was doing the hover checks and I have no yaw, pitch or roll when at 0 throttle, once throttle is applied I can yaw pitch and roll. Is there something in beta flight or on my controller (Radiomaster T16S MK1) I should check?
In betaflight I can see the receiver responding to inputs but nothing when armed at 0 throttle.
Thanks in advance
Much appreciated.
Turn on air mode?
@@JoshuaBardwell Thanks, That did the trick.
What is flight time of the drone with calm cruise style?
About five minutes.
Missing an ESC?
The amount of available ESCs does not match what the flight controller is reporting. This can have multiple reasons:
The ESC was not ready yet. This can for example happen if it is playing a melody. Also a previous flash could have gone wrong and it needs longer to boot up than usual.
There are simply not more ESCs connected.
The MCU of the ESC is defective.
Try a different USB cable - sometimes they are not properly shielded and might result in such errors.
Should your radio be turned on, try again after switching it on. Switched on radios have been reported to cause issues with electro-magnetic interference and thus failed reads/writes.
If the result is not what you are expecting, try clicking the 'Read Settings' button again.
Please help me how to fix this
I can’t flash esc 😭😭
How do you mount the gopro here????
3d printed mount.
is crossfire compatible with this build?
Yes. But this is the 2022 build and there is a newer 2023 one that is actually up to date.
I got this kit got it flying everything’s working except the video for some reason I can only receive video when my antenna is pointing directly at it and I’m less than a foot away and even the the signal is almost zero. So I’m coming here to se if anyone can help
Your vTX is in pit mode. Look at 39:00 in this video for how to fix it th-cam.com/video/jUPppjrZdxs/w-d-xo.html
Hello :) I just got my RTF Lumenier quadcopter just like this one. I have a TBS Tango 2 and can not figure out how to bind it to my transmitter, when I plug it into beta flight it says RX_Failsafe/ no valid Receiver signal. The crossfire transmitter has a solid red light. Its kinda funny because my other drone has the same issue. I have no idea what to do, and no-where is there an answer to what i need to do. :( I was hoping the master of all things quadcopter could help me :) idk where else to go.
Do you know how to bind crossfire receiver? It should be solid green led when it's bound.
@@JoshuaBardwell For some strange reason its solid red. I guess I have to take the receiver out?
And no I have no idea how to do that, I am soaking up as much knowledge as I can, but this is one I'm kind of stumped on. with 2 drones :( I'll watch the configuration video/ thank you for responding. You are awesome!
Well I got the receiver into Bind, but when I go into TBS agent lite, it just says looking for devices. 🤷♀️ …
1:24 HA! GOT EM!
I'd think that wouldn't be your first choice in antennas...Tell me it wasn't.
There's only two people who can pull this look off 9:00
JB and Dr Disrespect. lol
Go fly your quadcopter he says 😂
Hey JB, great build. I would like to see a review on the "new" namimno flash ELRS module and receivers, if it's possible for you as soon as the receiver's are back in stock on banggood.
My favorite 5 inch freestyle frame it really does fly really nice!!
Unlisted? i'm on the darknet!
As it turns out one of the settings was wrong which caused my first crash
Am trying to fly an FPV and its soo hard to get the hang of it. I have a dji fpv at the moment and in manual mode it just flies off on the simulator and am not able to control it one bit. I eventually plan on moving to the traditional fpvs and want to build my own quad but the controls are just so hard. Any tips on how I can improve? I practice on the simulator and I can’t seem to get the hang of it at all.
The arms joints are too soft. Not a good arm design.
how the hell has no one come up with a proper battery mounting setup jesus christ
Why don't you show us how it's done? What would that look like?
Bro can you give me a fpv drone for free 🆓
Withou you, I would'nt be building a quad today. You're a trully god like professor and every explanation make sense and are clear. A very BIG thank you to you and never stop make us learn something today. Contact me If you want free tpu part. I have a 3d print business :)